This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 120 121 [122] 123 124 ... 270
6051
« on: March 02, 2019, 09:37:01 PM »
Sweet paint job. I see us markings, where is that?
6052
« on: March 02, 2019, 05:21:25 PM »
Rest of my parts showed up. The DIY4x stuff is really nice. Got some angle 1/4 iron to attach the front hangers.
Rain started again as I go the front up and blew off few more parts.
Will need to drop the sway bar and found it already has a raised steering arm. The 4in springs are about 2-3in under the mounts with the new springs right on the frame.
6053
« on: March 02, 2019, 05:00:51 PM »
52. Got a late start on kids. Had to find the manual....13&15 year olds
Sent from my iPhone using Tapatalk
60, daughter 16 just got her DL. Still have an 11 and 14 boys and a tough morning.
6054
« on: March 02, 2019, 04:57:21 PM »
Thx for the link.
Like the lone dummy in there, good 1st stage recovery.
0300? Guess I will watch the video.
6055
« on: March 02, 2019, 04:13:21 PM »
I fell asleep, is there a link to the launch.
Good work all!
6056
« on: March 01, 2019, 10:32:59 PM »
Wow, the golden years,,,,,,,,,,,,,,
6057
« on: March 01, 2019, 10:23:20 PM »
I like it, diff and a history of the owner.
The other NTBD lift is Cognito, the lift I had. Their knuckles are also formed and welded with just a 1/2 inch spacer.
Were Fox shocks part of the package?
6058
« on: March 01, 2019, 05:12:19 PM »
Tools are always cool. Does it bolt up like it should and checked runout?
6059
« on: March 01, 2019, 05:11:09 PM »
Cool
6060
« on: March 01, 2019, 02:49:35 PM »
Moms house sold in 3 weeks for full asking price. Now more work starts as it is still full!
6061
« on: March 01, 2019, 02:48:37 PM »
Just set up an appointment with the eye doctor for next week.
Little thick on the weld, but you have a handle now!
6062
« on: March 01, 2019, 01:57:47 PM »
Do as I say, not as I do.
6063
« on: February 28, 2019, 11:41:05 PM »
DOT response, I like the rope vs the solid handles.
Oh, the bumper looks good too,,,,,,,,,,,,,,,,
6064
« on: February 28, 2019, 10:47:24 PM »
Some parts came in, clear outside but still need the big parts.
They come tomorrow, when the rain starts again,,,,,,,,,,
6065
« on: February 28, 2019, 10:00:47 PM »
Check your clearance on the tie rod boot. Mine rubbed when turned tearing the boots.
OK, wilco. SHould have those bolted up tomorrow sometime, I hope
Yours look better. Simple fix was a few washers.
6066
« on: February 28, 2019, 09:58:09 PM »
Check your clearance on the tie rod boot. Mine rubbed when turned tearing the boots.
6067
« on: February 28, 2019, 09:51:49 PM »
Looks like it is on backwards, wrong side.
You think?
It aligns with the factory LCA in this manner. A raised boss on the control arm aligns with the shorter shoulder, so I was thinking this was the right way. Anyway, I pulled it off, and switched it around and it still was not allowing the LCA to rise without pushing this thing outward. Something is not right with it...
If I remember don't these come off and replaced by smaller ones for more travel?
6068
« on: February 28, 2019, 09:49:43 PM »
Can't agree more, great work.
The bad guy also thought he had backup,,,,,,,
6069
« on: February 28, 2019, 09:40:52 PM »
Looks like it is on backwards, wrong side.
6070
« on: February 28, 2019, 09:35:28 PM »
I have no issue with that,,,,,,,,,,
6071
« on: February 28, 2019, 09:17:43 PM »
When I did simunitions I did empty a mag on a guy with a shotgun. They asked why, said he didn't drop the gun and hadn't hit the ground yet.  Paintball and Simunitions don't have an impact like a real round.
6072
« on: February 28, 2019, 09:12:54 PM »
And how he only shot him twice is what’s amazing. I’d have emptied it on him
Sent from my iPad using Tapatalk
Thread was down, dropped the gun. Very aware and turned on the other unknown quick.
6073
« on: February 28, 2019, 08:49:39 PM »
We are all thinking the same thing! Yup, Ryan. And besides, he cant drive at night with those headlights pointing at the moon
They will be great signal lights to find. Do we all think the same of ferds?
6074
« on: February 28, 2019, 06:14:27 PM »
I had the igloo's, 2 of them. OK but to much stuff hung out. Sold now.
6075
« on: February 28, 2019, 04:27:52 PM »
That was great video. What was it 3 seconds from threat to control of a second subject? Good thing his hand was on the gun.
6076
« on: February 28, 2019, 04:21:31 PM »
Trials riders are crazy. Watched a couple runs in SoCal in my youth.
6077
« on: February 28, 2019, 01:51:37 PM »
No it is from Lifetime, carried by many stores and US MADE!
I like the 28, haven't seen that yet!!!! Lists for $99, 30 less than the 55. Figure $70 at wally but you can order on site now for $99.
6078
« on: February 28, 2019, 12:23:45 PM »
With my ankle surgery I was told 6 months to a year to get back to normal. It really took 2 years and now at 3 I actually feel pretty good. Now mine was a full rebuild (bones, tendons and such), not soft tissue only.
Good luck either way.
6079
« on: February 28, 2019, 10:48:20 AM »
Hey, Ken and Shawn could double date!
Don, have you looked at the new Lifetime 55qt cooler? Right up there with the big guys and I like the hose outlet, just $97 at wally.
6080
« on: February 27, 2019, 11:31:04 PM »
Good luck on the Knee, getting old is a B((*&.
6081
« on: February 27, 2019, 05:23:57 PM »
Ouch,,,,,,,,,,,,,,,,,,,,,,,,,, 
6082
« on: February 27, 2019, 01:50:20 AM »
You can have her,,,,,,,,,,
6083
« on: February 26, 2019, 10:32:34 PM »
Mine is in the same place, pass side.
6084
« on: February 26, 2019, 08:49:11 PM »
Just waiting on parts and watching the rain.
6085
« on: February 26, 2019, 08:44:18 PM »
Yep, with the price of some parts now it doesn't make sense to rebuild.
Main thing is your happy with the setup, showing us the step or not.
6086
« on: February 26, 2019, 08:37:09 PM »
Hmm, wonder why the shuttle program was stopped?
Yes it will be good to have our men on our ships!
6087
« on: February 26, 2019, 07:39:21 PM »
After drinking some of that I may just ride the goat.
6088
« on: February 26, 2019, 02:03:09 PM »
6089
« on: February 25, 2019, 11:54:58 PM »
Is there a way to decipher a 500 from the top? What model of cars did they come in?
There’s an old fleet wood with a complete engine at the junkyard here.
Is the build sheet there? Maybe in the truck on the seat back?
6090
« on: February 25, 2019, 11:47:25 PM »
Wow, you got far! At this rate the lift will be on tomorrow.
I am no expert, but aren't you supposed to mate the halfs, set backlash and then check the pattern through the hole?
6091
« on: February 25, 2019, 07:54:09 PM »
6092
« on: February 25, 2019, 07:53:05 PM »
The engagement on those is so much better than the factory stuff.
Looks great.
6093
« on: February 25, 2019, 07:50:39 PM »
Sent from my iPhone using Tapatalk
Anyone with half a real mind.
6094
« on: February 25, 2019, 04:19:19 PM »
I want em isolated, plenty of other islands to visit!
6095
« on: February 25, 2019, 01:50:17 PM »
I her interview, she has a gas stove and they made sure we new she now lives with her WHITE boyfriend, who is paid buy her office.
Maybe we just give them Hawaii, move em all there and see how it works.
6096
« on: February 25, 2019, 12:11:41 PM »
I helped with the Pinewood derby for years, lots of fun! Now they are both Boy Scouts.
6097
« on: February 25, 2019, 11:14:02 AM »
Are those plastic spacers?
6098
« on: February 24, 2019, 11:27:05 PM »
Made some goo progress and broke a few things? Guess since it is pressed on your are not going to make setup bearings?
Looking at your lift picture reminded me of why I went with the Cognito lift. Spacers were just 1/2" vs what looks like 1"+ you have there. Just a personal preference to keep it narrow.
Watched a couple setup vids, like to see you do it!
6099
« on: February 24, 2019, 11:03:58 PM »
I would be happy with a shelf (I have), a hole would collect it and warm it up. Mount a stick on up high, maybe neck level with a straw.
6100
« on: February 24, 2019, 05:16:15 PM »
Ordered new front hangers, new rear frame hangers and some J shackles since the axle is moving forward. So much for saving on the shackles, but puts me where I need to be later too.
Pages: 1 ... 120 121 [122] 123 124 ... 270
|
Show Posts
