0 Members and 2 Guests are viewing this topic.
Which is more desirable in these automatic transmission or manual? Sent from my iPhone using Tapatalk
BUY THE GREEN ONE. Sub 32" you'll never break an axle or damage diffs unless you're pulling out heavier vehicles in reverse and uphill. Reverse dana 30 high pinion w/ better ground clearance runs on the drive side of the ring gear teeth, 40%+ stronger than 1999+ w/ standard rotation, low pinion front diff. 8.25chy rear = mo betta butta than the m35. M35-7.562" w/ 8 ring gear bolts, 27 spline axles. 8.25chy is well, 8.25", 10 bolts, 29 spline axles. Manual is great asin/warner ax15, close ratio trans, good crawling gears. Autos are fine too, not overly complicated like the Grand Cherokees. if it doesn't already have one, get a slip yoke eliminator kit for the rear driveshaft and call it a day.
BUY THE GREEN ONE.
So, Bobby...being the calculating trained warrior NCO that you are. Take the appropriate action, Execute!
your standard grunt level CQB is just putting rounds and rounds on scary stuff till it stops scaring you!
Green one = Don painting a star on front doors in pearl white to keep the theme going!
Pics of the 3/4 ton?Sent from my Pixel using Tapatalk
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.
You complain about parking a CC/SB duramax?Sniff, scoff, incredulous DD the duallly for 5 years, it’ll make that truck feel like a sports car....Sent from my iPad using Tapatalk
but my new sissy truck sure is smooooooth :wink
That thing looks good man...and I don't even like red. Don wants a Xj? I will trade ya one for Square D=P its rustfree...already rhino lined. Already has a small lift. Also already has a rod knock so no need to fret that becoming a problem =)
I think that right there is a smart deal ^^^^Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I thought maybe I missed a new toy while I was gone.Just missed the discussion. My boys like these things, good info on the years.
Hey Don, take a look thru the LA ads for what your looking for, some are pretty clean I plan on making a trip back that way soon.
As long as you get to change the fluid, all is good.
Given your list Don, just purchase some square and round tube and start welding....you can purchase body panels cheaper than your current plan!
^^^He doesn't need your help!!
That list looks very similar to another on this forum what was it called? Sent from my iPhone using Tapatalk