This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 121 122 [123] 124 125 ... 270
6101
« on: February 21, 2019, 01:48:54 AM »
Even though the 6BT is planned for this, I decided to get the stock setup working as best I could for now. To much on the plate for full swap right now.
With that in mind, I ordered a banks exhaust manifold for the turbo. It will allow the turbo to be turned and moved forward. This will allow better flow and let me put the AC back in working order.
6102
« on: February 21, 2019, 01:38:47 AM »
Thought mama was going to park in the little garage?
My oldest takes her driving test in the AM.
If she gets it (some reservations) she was supposed to help getting the others to school. Now she says she wants to go so early to park, the others can't be driven by her. Will be addressed as if I am paying for insurance and reg, she will help.
Took the boys up to the snow today. They closed 80 when we were between ramps (CA drivers) so we sat there for an hour. Finally turned around and found a couple spots near Alta. Had a little dinner at Carls JR and went to Bass Pro for an hour or so.
6103
« on: February 19, 2019, 11:54:01 PM »
Prayers sent, now bend over.
6104
« on: February 19, 2019, 06:00:16 PM »
Looks good. Did you get it winch and all?
6105
« on: February 18, 2019, 10:17:31 PM »
You know I can't tell you guys how many torsion bars I have done without a tool. Just jack up the truck, relieving tension and they adjust easy.
I just got one though as they are just $20 now.
6106
« on: February 18, 2019, 10:02:41 PM »
What, no bigger TB with the cam, headers and tuning 
6107
« on: February 18, 2019, 10:00:11 PM »
I would put it on and plug the hose. Smog police look for the obvious, remember the ECM will need programming for that.
6108
« on: February 18, 2019, 09:56:41 PM »
Yes it did and your welcome!
6109
« on: February 18, 2019, 05:32:39 PM »
Still have that broken up DJI Drone?
6110
« on: February 18, 2019, 03:19:28 PM »
Good on the build, how's the family?
6111
« on: February 18, 2019, 01:29:18 PM »
Nice grandma car there. Plenty of metal and a little higher. Not a ford fan really but they are about it for full size now.
6112
« on: February 17, 2019, 05:54:35 PM »
Yep, SD was legendary for sure.
6113
« on: February 17, 2019, 05:53:12 PM »
Fastest invoice in the west,,,,,,,,,,,,,,,
6114
« on: February 17, 2019, 02:21:28 AM »
Great news!
6115
« on: February 17, 2019, 01:42:08 AM »
It is pretty cool, but lets put these in his 2002 sub build! Enough of the DOT crud
6116
« on: February 16, 2019, 11:05:24 PM »
Just another fluid change,,,,,,,,,,
6117
« on: February 16, 2019, 11:03:35 PM »
Guess the camera is playing around, looks like it about a foot wide. Not a bad thing for a big bumper.
6118
« on: February 16, 2019, 10:59:13 PM »
Well, you come this way be sure to give me a heads up. It is a beautiful place. Just be sure to get your "poop" app for a SF visit.
I need to call him too now that I have the weight of the Dmax and figure spring length.
6119
« on: February 16, 2019, 08:52:21 PM »
No, that worked when I did. This state SUCKS.
6120
« on: February 16, 2019, 05:18:35 PM »
Can't add enough prayers Don. That is nothing to mess with.
6121
« on: February 16, 2019, 05:10:39 PM »
Hey, I simply addressed it as you told me 
6122
« on: February 16, 2019, 04:45:49 PM »
Cool part, but $74.
6123
« on: February 16, 2019, 04:44:17 PM »
So about a year ago I transferred my mothers camry over to me for insurance as she could no longer drive.
When I transferred it, they gave me new Ca plates, which I don't understand and I turned in the old plates.
Over the last year I have gotten several letter to pay the old registration from DMV. Now I get a demand letter from DMV to pay, who has turned it over the tax board for collection with threats of wage garnishment, revoking state license's, property and bank liens.
All this over a car registration that was transferred? This state is getting so bad I may just buy a peice of dirt to get out of here.
Rant over for now, but possibly to be cont,,,,,,,,,,
6124
« on: February 15, 2019, 08:03:24 PM »
That color I can handle.
6125
« on: February 15, 2019, 08:02:33 PM »
Added, keep up the fight!
6126
« on: February 15, 2019, 07:26:00 PM »
6127
« on: February 15, 2019, 06:11:05 PM »
My turn; 
6128
« on: February 15, 2019, 01:54:29 PM »
Still laughing;
6129
« on: February 15, 2019, 01:52:49 PM »
So Dave, I guess you got lucky,,,,,,,,,,,,,,
6130
« on: February 14, 2019, 10:11:58 PM »
I'm guilty there but that's not my mug.
6131
« on: February 14, 2019, 10:06:59 PM »
When I was there for a week middle of summer it was always cloudy.
6132
« on: February 14, 2019, 09:59:07 PM »
Looking up some gearing and I saw this face, anyone we know?
6133
« on: February 14, 2019, 07:32:25 PM »
Been chasing the hallway lights 2 way switch wiring. Something looks to be diff and can't get to work at all now.
6134
« on: February 14, 2019, 06:27:19 PM »
Well, looks like tap talk isn't right either.
6135
« on: February 14, 2019, 01:29:59 PM »
Welcome Cameron, you sure your ready for us?
6136
« on: February 14, 2019, 01:22:44 PM »
Blue or turquois? I thought the same, customer order.
Is there a range hood hidden in there?
6137
« on: February 13, 2019, 11:53:02 PM »
Sad day for RMTWS, but understood. Directions change.
I have looked at those HF tools also, price of the batteries is enough to look!
6138
« on: February 13, 2019, 11:26:15 PM »
I built my own engine stand years ago. Used 3 in square and just welded a tube on the top. About to mode that using a wheel hub. That should hold anything and spin easy. Just have to figure a crank system to turn it.
6139
« on: February 13, 2019, 07:21:44 PM »
Nice find, fair price. Who drug em home?  It wasn’t a Jeep.....
6140
« on: February 13, 2019, 12:23:31 PM »
So that is only needed on the warns, not the hardcore?
JR, I just did a set of Yukon hardcores on 35 spline kingpin 60, zero issues.
6141
« on: February 12, 2019, 11:23:04 PM »
Sweet !!!
6142
« on: February 12, 2019, 11:19:46 PM »
I don't remember who I got it from, was like 10 years ago. A sharing session would be great.
I pulled the onstar fuse when I had it but have done it many times since. Just started having issues with all the new upgrades and the CTZ-COZ tunes.
6143
« on: February 12, 2019, 10:57:33 PM »
Weighed the dmax today, 8400lbs with my normal stuff, 4400lb on the front axle.
Bought a new DSP5 and trans tune before I saw Don post. Still can't get anything to load and EFI just says read the instructions. Trucks running OK but think it could be better.
Does anyone know this stuff? Done all the updates, seems to load and I see it in the V2, but just says "script error 0502" when I try to load.
6144
« on: February 12, 2019, 10:50:19 PM »
Ouch, fingers crossed and prayers too. Kids heal fast though.
6145
« on: February 12, 2019, 10:40:28 PM »
Like to see what you get. I have an older RCA running windows and the newer Samsung Andriod.
6146
« on: February 12, 2019, 08:44:42 PM »
That green bore is super tiny. You think they would have upgraded the kit for 35 spline.
6147
« on: February 12, 2019, 06:52:41 PM »
I just got some of those stage 8 nut sets, hope it wasn't a waste.
6148
« on: February 12, 2019, 06:17:17 PM »
Curious, was the ring/spacer then when you took it apart or is this because of the new hubs?
6149
« on: February 12, 2019, 12:17:28 AM »
Will try that, my way wasn't working well.
Remember I said in another thread how I like to watch stupid drive in the snow? I just don't like driving with them.
This Here is the affects of JRs storm
Thanks pal. Your great
When I walked out of Cabela's, it was still mild. This is what I saw all the way home. Pic does not do it justice.
6150
« on: February 12, 2019, 12:13:57 AM »
Had a little in the Paypal account and dropped the coin for a new DSP5 with Allison tune for the Max. Hopefully will go in shortly, to may kids things today. Called Bear Performance, but they don't do diesel! 
Pages: 1 ... 121 122 [123] 124 125 ... 270
|
Show Posts