This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 133 134 [135] 136 137 ... 270
6701
« on: October 27, 2018, 11:26:49 PM »
Ok, you get the rest of the dmax parts ordered then?
That is the plan. Springs at least!
6702
« on: October 27, 2018, 11:25:52 PM »
I made around a grand on it, but it was a fun project too.
Need a few measurements to call deaver next week.
6703
« on: October 27, 2018, 11:23:08 PM »
Oh, we understand. Lots of stuff on the table for sure.
Since you know the issues, maybe let someone look at who plays with things like us and they might see something.
6704
« on: October 27, 2018, 09:48:54 PM »
Purty door, but shouldn't the star be red??
Nice work, and like me, slow and steady,,,,,,,,,,,,
6705
« on: October 27, 2018, 09:45:47 PM »
Well, had a guy come up from San Jose and paid full price for it. Told him I was not flexible on the price, and he still came up.
Still had to do the hubs, front studs and rebuild the dash. Found it had a small radiator leak is the worst part.
Now I have $$$ to get springs for the Dmax.
Bye, Bye,,,,,,,,,,,,
6706
« on: October 27, 2018, 09:39:33 PM »
I sold the 1500 Sub for full price not even finished,,,,,,,,,,,,,,,,,,,,,,,, 
6707
« on: October 27, 2018, 03:18:51 PM »
Depending on what search engine you use it does show up. I have a hit from Penn right now. I like searchtempest, plus is was on pirate which I need to repost.
Someone coming over today to look at it from the bay area. Got the back together and cleaned out. Doing the front now. The bozo I got this from cut air ducts out for the stereo.
6708
« on: October 27, 2018, 03:13:49 PM »
Remember just waiting for it to get fired up?
6709
« on: October 27, 2018, 12:40:19 PM »
With all the room in back Ken could pick up H and O for a party.
6710
« on: October 27, 2018, 12:38:51 PM »
I think they are having a service and mounting a memorial in front of it.
6711
« on: October 27, 2018, 12:36:00 PM »
There is room for machines in that place Shawn?
Problem Don, or just dreading the down time?
6712
« on: October 26, 2018, 11:00:07 PM »
Washed it a little, drove it down the street. Feels really good, shifts good. Rear is a little high but still jazzed.
6713
« on: October 26, 2018, 10:45:59 PM »
He could break that too,,,,,,,,,,,,
6714
« on: October 26, 2018, 10:36:48 PM »
Sounds you actually got off easy. I still don't have dash lights.
6715
« on: October 26, 2018, 07:03:10 PM »
Maybe they will give you enough for the JD for a another quad
6716
« on: October 26, 2018, 06:37:02 PM »
You need more equip it looks to me and some lights!
Looks like the muts get along good.
6717
« on: October 26, 2018, 03:22:51 PM »
The tank was from 1A Auto and would use them again. Took 3 days to get the tank via amazon from Kansas.
Used #30 felt for the padding and adding the tank opening is a no brainer. Made it so easy to hook up, should be standard! The motorcycle jack made it easier too once the neck was in.
Going to seal it up with a little silicon and call it a day.
6718
« on: October 26, 2018, 03:07:17 PM »
Funny, I DL the clip and hear it fine. (I did compress to keep the boss happy with a small file)
6719
« on: October 26, 2018, 02:14:28 PM »
Had a little lifter noise at first, but after 14 years I wasn't surprised. I can hear it, any others?
Ran through the gears and it seems to grab good, but haven't actually driven it.
Love to have it gone by the end of the week.
6720
« on: October 26, 2018, 05:23:51 AM »
Well, at 0129 this happened;
6721
« on: October 25, 2018, 03:35:26 PM »
Of course, more sent and more to continue. No need to stop praying for those here, lost and remembered.
6722
« on: October 25, 2018, 02:17:47 AM »
Pump got here today, tank will be here tomorrow. With that I figured finishing off the hatch is in order.
Cleaned the edges up, cut some tabs, drilled holes and spot welded the tabs on. Cleaned up and painted. I will do a "how to" thread on this in the Spartan thread.
Cleaned up lots of wiring, tied up more and pulled out more! You should see the box now! Still 1 crossover to get under the dash behind the radio.
Both rear windows work, power to the fronts so both will get new motors.
6723
« on: October 24, 2018, 03:32:55 PM »
Would answer a lot of questions.
6724
« on: October 24, 2018, 01:47:03 AM »
To bad you don't have one deep enough not to freeze. Trout would be sweet if there was enough flow to keep the water cool in summer.
6725
« on: October 23, 2018, 10:30:45 PM »
He is not going to let them in. In any event it is months away with a hurricane or two before they get near.
Soldiers won't have to man the border, we citizens are fed up and will stand guard whether we have the 1st Cav or not.
I would!!
6726
« on: October 23, 2018, 08:48:25 PM »
I really hope he stands up and does not allow any of this hoard to pass. If he does it will get worse.
Lets put the military on the border and stop the invasion!
6727
« on: October 23, 2018, 11:23:30 AM »
They are getting more common for sure. Good enough, one misspelling. Would like to have it myself...but with squareD I'd likely not survive the critics!
Heck with 3 row seating that would be great out there and it runs,,,,,,,,,,,,,,
6728
« on: October 23, 2018, 11:07:13 AM »
They don't have the right, and maybe now with a better balanced SC that may become the standing rule (post hurricane).
6729
« on: October 23, 2018, 11:04:24 AM »
Yep, those stones are a god send, pun intended!
6730
« on: October 23, 2018, 10:58:24 AM »
That is a nice truck and price. Just be sure the injectors have been done or get a warranty for that.
6731
« on: October 23, 2018, 01:48:52 AM »
I like the wall, hope you don't run out of stones! Just 1 question, where is the boat ramp 
6732
« on: October 23, 2018, 01:43:11 AM »
That might be worth the drive!!
6733
« on: October 23, 2018, 01:28:44 AM »
Thx, have seen them go for a lot more, but I want to move it and it needs paint.
With this and the old add I have 3 parties looking. Bumped it from 2500 to 3000 with all the new stuff.
Clean up the interior this week while waiting for another tank/pump. Went to fast and got the 31 vs the 40.
When running will turn around, change the front studs to 14mm and add locking hubs. Then paint the hood black and address the rusty roof if still here.
6734
« on: October 22, 2018, 03:38:54 PM »
6735
« on: October 22, 2018, 03:30:19 PM »
Up to 10k today, who is paying for this?
Did you know they cannot ask for political asylum in the US? For political asylum it has to be the first country you get into, not where you want to go.
Not meaning any harm, but the hurricane may fix some of this.
6736
« on: October 22, 2018, 03:26:37 PM »
Have to agree, but who called Don old?
6737
« on: October 22, 2018, 02:36:57 PM »
6738
« on: October 22, 2018, 02:34:13 PM »
Just need some spikes sticking out!
6739
« on: October 21, 2018, 10:23:37 PM »
My cave is the shipping container.
6740
« on: October 21, 2018, 10:13:08 PM »
You gunna live there?
6741
« on: October 21, 2018, 10:10:48 PM »
Got back from camp today, what a mess it was. Now camp was great, but parking was in single lines and I was like 2 miles out. So after gear was dropped had to go back and get a few little things.
On the building side, I dropped the tank after getting home. Now trying to scape the insulation crud off for reuse.
6742
« on: October 21, 2018, 10:07:13 PM »
Sorry to hear that.
6743
« on: October 21, 2018, 09:27:08 PM »
My point was JR it seems the Japanese incorporated this feature into the mainstream on most of their engine designs.
Oh, I knew where you were going. If a mouse trap works, speaking of, Don??
6744
« on: October 21, 2018, 12:02:55 AM »
So they used isuzu tech, if it works, it work.
6745
« on: October 20, 2018, 07:54:19 PM »
Speaking of scouts,at an expo on Beale AFB.
6746
« on: October 19, 2018, 12:50:22 PM »
$$$$$
6747
« on: October 19, 2018, 12:48:38 PM »
Seems fair....
Crumbs,,,,,,,,,,,
6748
« on: October 19, 2018, 12:44:07 PM »
This is service. Ordered yesterday around 1600, changed the order about 10 minutes later and here it is today at 9:19. To bad I can't get to it until next week 
6749
« on: October 19, 2018, 12:38:14 PM »
I think Ken is still hoping H runs in 2020..... 
Well, that would be an emergency!!
6750
« on: October 19, 2018, 12:36:11 PM »
Duramaxs have, but are long bolt in things.
Pages: 1 ... 133 134 [135] 136 137 ... 270
|
Show Posts
