19951
Coffee Induced Early Morning Rant / Re: Exercise extreme caution when viewing this thread...You have been warned!
« on: December 03, 2016, 08:11:53 PM »Couldn't help myself, made this a sticky.No self control!
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 19951
Coffee Induced Early Morning Rant / Re: Exercise extreme caution when viewing this thread...You have been warned!« on: December 03, 2016, 08:11:53 PM »Couldn't help myself, made this a sticky.No self control! 19952
General Vehicle Related Discussion / Re: 20 year old Fourtrax 4x4« on: December 03, 2016, 08:10:55 PM »
Hey, I need another side by side...Possibly a Christmas gift for my pretty Misses. My old 825I gator was not fast, only did like 44 MPH. I want something with a lot more power, but not insane. And I want a work box for doing stuff like you did in the pic. Firewood, stones, kids, dead deer, whatever. What should I be looking at?
19953
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 08:07:35 PM »
And, yes, house killin' time is fast approaching...
Wish I had my old M60A1... That thing would make very quick work of that structure. Always wanted to stick the gun tube inside a building then squeeze off a round. I bet the muzzle blast would send that house into a million pieces...How cool would that be? 19954
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 08:05:17 PM »
Here are the four posts for the shooting bench for Henderson Range. I'll have the pre-rangers strip off the bark from those cedar posts, then I'll add a roof and a bench. I can see the boyz playing in there more than serious shooting, but what the heck, it's their place and time to explore and grow.
19955
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 08:03:25 PM »
The Chevy is really performing well. It had every opportunity to get stuck this (wet) weekend, but it didn't even spin a wheel. That Grizzly Locker that I got from Tate and Randy's ring and pinion is one outstanding piece of metal magic!
I managed 18.2 on the trip down and 19.2 on the trip back!!!! 19956
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:59:31 PM »
I ran out of full panels at this point. I'll pick up maybe 3-4 more to finish the south side and wrap the north side "Kitchen" slide-out
Yes, its crooked... Paint covers all... So if you see the dark gray on the lower side of the camper, I plan to use that color to paint the pink stuff that Shawn likes so much. 19957
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:57:44 PM »
Then the gap between the two slides...
19958
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:56:17 PM »
Going up the west side, which sees the majority of the wind, I cut in the foam board around the window
19959
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:55:07 PM »
I created a drip rail on each overhang to keep the driving rain away from the insides of the now insulated area
19960
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:53:32 PM »
I added the R-7 1.5" thick foam board to the top side of the slides as well
19961
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:51:59 PM »
I need a new ladder!
19962
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:51:33 PM »
The boys either worked on the camper project, or split wood, or took off, shotguns in hand after the coyotes.
That's good stuff for young men. They will always remember these days Next, on the south side, there are two slides that are close together. I decided to make a singular box out of the two and wrap that on all sides except the south side which sees full days of sun 19963
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:48:04 PM »
Yep, he's wearing a Real-Man hoodie!
Then the east side was blocked off and secured with gravel inside and outside Sled dog is ever vigiliant (or sleeping!) 19964
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:46:39 PM »
It went faster today because I had a little guy helping me on the "inside"
19965
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:45:56 PM »
Back in the chock blocks at planet home. Last two days farm side fixin' stuff, and terrorizing the coyotes. We found two dens or homes or whatever those critters call home. One is that huge wood pile I pushed up with Sarge in the early summer. Strong urine scent and droppings around it, same-same with the barn. If it wasn't for the state burning down, I would have made a circle of kerosene and lit em' up. Then give them a 12 gage chaser as their flamin' butts cleared the wall of flames.
Anyway, I almost have the pink stuff done. Here is the rest of the North side: 19966
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:41:17 PM »ROFL, ok I guess we'll give him TOGP (the old guy pass) for the moment......Don't need no stinkin pass! 19967
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 03, 2016, 07:40:01 PM »Little charcoal lighter is handy as well as a propane torch, both have many more uses around places like that!Did that today JR. I lite it and it hit 500 F in less than a minute Solid technique, I'll be keeping that little trick! 19968
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 02, 2016, 01:50:59 PM »I like that, believe it just might work!I did run into a problem, though. With the wind picking up, the stove is kicking all manner of smoke out everywhere. I picked up some stove pipe RTV to seal the joints, and I plan to install a flap valve in there to control the heat loss. That will be completed pretty quick due to the need for heat in the shop during the long cold workdays. But I will need to solve the kickback of smoke. It only does that when first starting, up until it gets to a good running temp, above 500F. 19969
What are you building? / Re: Composite basement wall panel« on: December 02, 2016, 01:48:15 PM »Cedar logs?I have thought about that. 19970
Build Threads / Re: 2008 Jeep Jk 4 Door« on: December 02, 2016, 10:04:41 AM »If you build your can carrier so that you can remove the lids while mounted, you can use a hand pumped syphon to refuel. Then you won't have to worry about removing the can, and getting the spout firmly seated in the fuel filler while trying to balance the can and pour. ;-)I planned on using just such a pump to refuel off of the hippies drivin' the jap cars! 19971
What are you building? / Re: Composite basement wall panel« on: December 02, 2016, 10:03:04 AM »Got access to any cross ties or power poles? You could sink those very close together and sheet the exterior and damp proof the outside and backfill.No, no good sources for those around here... 19972
D.O.T. / Re: WDYDT (What Did You Do Today)« on: December 02, 2016, 09:59:10 AM »Now that ^ sounds like a real good time.You would think that ;-) 19973
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 02, 2016, 09:55:56 AM »Yea, well I called Dow Corning and asked if they could make me a special run of camo foam board, but I guess they couldn't work me in, so I got stuck with the faded red stuff. Ya know it could have a gay pride rainbow pattern on it, just as long as it keeps me, the missesses, the pre-rangers, and ma doggies warm!What kinda finish you looking at. I mean the pink is OK, but,,,,,,,,,, 19974
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 02, 2016, 09:51:02 AM »Couple thoughts, use a shovel & bucket to clean out wood stove. If ash falls on floor or exterior crevices of stove then use that vacuum.Yea, good copy on all Was going to pick up a new rope for the stove door today. Have some dry logs and some drying logs, and loads of green stuff. I picked good stuff yestertag, but that darned wind was shoving air molecules down the stack. On that chimney, when I build the shed dormer, I'll shove that chimney up another section or two to clear the top by a few feet. 19975
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 02, 2016, 09:47:38 AM »I like that TB holder.I was reading about how a local church set builder, builds all sorts of things from this foam. He then turns it into stone, rocks, bricks, or concrete. He does a texturing then paint. He will paint with an exterior darker gray, then take a couple lighter shades of gray, cut that with water (a-lot) then spray the mixture onto the first layer. I tell you, the stuff looks like crete when he's done. So I was thinking of texturing it some with some sand or troweled on mortar, then give it the stone paint treatment. That won't happen until June. The priority is to build in usable living space right now 19976
Coffee Induced Early Morning Rant / Re: Exercise extreme caution when viewing this thread...You have been warned!« on: December 01, 2016, 08:23:16 PM »
So sad this all is so true
19977
Coffee Induced Early Morning Rant / Re: Exercise extreme caution when viewing this thread...You have been warned!« on: December 01, 2016, 08:21:38 PM »
What goes around, comes around
19978
Coffee Induced Early Morning Rant / Re: Exercise extreme caution when viewing this thread...You have been warned!« on: December 01, 2016, 08:20:09 PM »
From a retired Colonel:
19979
Coffee Induced Early Morning Rant / Re: Exercise extreme caution when viewing this thread...You have been warned!« on: December 01, 2016, 08:06:39 PM »19980
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:55:17 PM »
I like how this area finished out after raking in the gravel and back filling. It's a keeper!
19981
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:54:21 PM »
In the same fashion as an "I" beam is strengthened by the end flanges, I did a little bit of that with the foam board as well
19982
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:53:05 PM »
The bottom end is secured by 3" of gravel which is plenty strong. And this gravel is not going to move around, but rather pack in over time
19983
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:50:52 PM »
I am creating some semi-hidden spaces for addition of future mechanicals which will be somewhat weather resistant
19984
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:49:16 PM »
Then around the kitchen slide out
19985
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:48:01 PM »
Piece by piece it is going together.
Things like steps and braces and electrical wiring all require access and relief cuts 19986
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:45:59 PM »
Next, I went after the skirting again. It is a slow and methodical process involving a lot of measuring and cutting and fitting and recutting, then squaring and taping. But it is becoming a pretty strong and nearly airtight (wind) closure.
19987
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:43:42 PM »
I ordered four more stabilizer jacks for the camper. I wanted to buttress the long run of steel from the axle toward each end. I picked up four-5,000 lb jacks to do just that. After leveling the cribbing by walking it into the gravel some, the jacks were cranked up to contact + one turn.
19988
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:40:46 PM »
And again in keeping with improving the living conditions, I installed this nifty tooth brush holder. I firmly believe when one does something to improve his condition, there is a resulting psychological boost
Who'd have thunk it...A tooth brush making one happy! Weird... 19989
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:37:58 PM »
I did run into a problem, though. With the wind picking up, the stove is kicking all manner of smoke out everywhere. I picked up some stove pipe RTV to seal the joints, and I plan to install a flap valve in there to control the heat loss. That will be completed pretty quick due to the need for heat in the shop during the long cold workdays. But I will need to solve the kickback of smoke. It only does that when first starting, up until it gets to a good running temp, above 500F.
19990
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:34:16 PM »
The big news is that I got the electricity working to the camper. I guess I didn't get the hot lead jumper connected tightly enough and it pulled out of the socket when I reassembled the 30 amp box. A simple reinstall and tightening fixed all that and just like that the camper was electrified.
I fired up the big hot oil radiator heater in the morning, flipping the load to max. Within two hours the camper was toasty, and by nightfall with the temps in the upper 30's and a 20 mph wind that camper was so toasty warm, that I almost stayed the night! 19991
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:30:28 PM »
The pics are not so good, but I am trying to show the vent cushions I picked up. You simply stuff them up into the vent recess and a major heat loss is plugged, just like magic!
19992
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:28:28 PM »
Northern also had these knee pads on sale, so I picked them up, as I already destroyed the cheapo HF units.
After using them all day, I will report them as marginally effective. The straps are too long and unless you are an elephant or Arnie Schwarzenegger they will be too long to really grab and keep the pads in position 19993
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:25:03 PM »
I like that it has a triple filter.
A woven cloth barrier, then the filter itself, which is surrounded by a steel screen 19994
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:23:06 PM »
I also picked up an ask vacuum to clean out the stove. THis gem was on sale at Northern tools on Black Thursday, so I picked it up
19995
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:20:26 PM »
In keeping with trying to improve my condition and survivalability with each and every visit, I added a quality tire repair plug kit today
19996
Hide Site / Re: Hide Site/Bug out Site construction thread, Part 3 (It's gettin' mo-betterer)« on: December 01, 2016, 07:18:13 PM »
Well, I'm thawing out by the computer after a good day working down under.
The mud season has set in. Even though I try to avoid it on my "two-track" road thing for now until probably late may, I'll be carrying off loads of mud every time I go there The tires are working well. I am not spinning at all, although on a cross slope, the truck will slide sometimes 19997
Coffee Induced Early Morning Rant / Re: Happy Birthday« on: December 01, 2016, 07:13:53 PM »Ken, Happy Birthday. Expect a civil suit from the perp you apprehended for violating his civil rights as your birthday present....Which is just another good reason Ken should have shot him, err, I mean, stopped him! 19998
Build Threads / Re: 2008 Jeep Jk 4 Door« on: December 01, 2016, 07:13:04 PM »On that wrench and lid, these guys are wheeling the Rockies. So not making excuses but it's not WI or KY either as far as elevation changes. The ID on my filler is 9/16 on the tube 3/4 odGood point on the elevation change! Start off at 5,000MSL and end up wheeling over the divide at 12,000. THe pressure difference would cause a lot of pressure to be pushing on the lid. Make it mucho harder to unscrew. OK Hoosier, you're forgiven! 19999
Humor, Good Stuff, and Red Neck Practices! / Re: An Old Soldier at the White House....« on: December 01, 2016, 07:08:51 PM »
Love it!
I like hearing that as well And in just weeks, we won't have to say "President Obama any more!" How nice is that! 20000
Coffee Induced Early Morning Rant / Re: Per Mattis his reading list« on: December 01, 2016, 07:05:10 PM »
It's true
And a very good thing! |