This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - TexasRedNeck
Pages: 1 ... 139 140 [141] 142 143 ... 224
7001
« on: April 17, 2017, 06:46:12 PM »
I wasn't offended by anything anyone here said
We'll try harder next time..... Sent from my iPhone using Tapatalk
7002
« on: April 17, 2017, 08:51:00 AM »
Two fried eggs with Tabasco
And black coffee. Lots of black coffee
Sent from my iPhone using Tapatalk
7003
« on: April 17, 2017, 07:32:30 AM »
Oil at 375, deep fry 10 minutes. Salt pepper on the wings, drain on paper towels. toss in a bowl with sauce of choice.
7004
« on: April 16, 2017, 12:58:58 PM »
No I sure it came naturally. The army had to learn to keep up with the carnage
Sent from my iPad using Tapatalk
7005
« on: April 16, 2017, 11:03:24 AM »
good looking work there!
7006
« on: April 16, 2017, 11:01:50 AM »
Have you ever seen the statistics for the number of man hours required to keep one pilot in the air for one hour?? It explains a lot. Jus sayin.
7007
« on: April 16, 2017, 08:18:27 AM »
Don would just hold them in the exhaust of the whirlybird and it would blow the feathers off and roast it to perfection.
Sent from my iPad using Tapatalk
7008
« on: April 15, 2017, 10:12:14 PM »
I pray for all of y'all every day. There are trials we all face and it's a test to keep our face towards the Lord. May His will be done.
Sent from my iPhone using Tapatalk
7009
« on: April 15, 2017, 10:10:16 PM »
Very cool. I need to do that to both mine. What did you use?
Sent from my iPhone using Tapatalk
7010
« on: April 15, 2017, 09:10:34 PM »
I didn't fall off the ladder today. Weeded and Mulched the garden and washed the Bus with help from the oldest. Changed blades on the mower. Mowed out by the road. Cut a new path on the other side of the creek. Checked on the caps I poured to make the other 3 columns level on the casita. Cleaned up the shop and organized some tools. Beat my wife at darts.....again. Sitting by a fire with a whiskey and Diet Coke.   Sent from my iPhone using Tapatalk
7011
« on: April 15, 2017, 09:05:54 PM »
7012
« on: April 14, 2017, 09:46:06 PM »
Fajita    Sent from my iPhone using Tapatalk
7013
« on: April 14, 2017, 07:17:07 PM »
 Sent from my iPhone using Tapatalk
7014
« on: April 14, 2017, 01:14:41 PM »
Off today. Drove to the weekend place. Changed out some CFLs for LED replacement baffle can retro fits. In the process I got lazy and fell off the ladder. Hurt my ego and ripped the flat screen off the wall in the process. Tv actually survived more or less but I ripped the ends off the HDMI cables. I need to go outside to the shop and do something more dangerous before I get hurt.
Sent from my iPhone using Tapatalk
7015
« on: April 14, 2017, 01:11:42 PM »
Wow. You should be an expert now!
Sent from my iPhone using Tapatalk
7016
« on: April 14, 2017, 01:09:45 PM »
True Bob but the Dually is my daily driver. :eek
Scaling it is solid advice. It's the only way to really know. Also if your truck is level unloaded you'll always be looking at the sky loaded. I put the 2 inch rake back in both of mine. Either that or some airbags
Sent from my iPhone using Tapatalk
7017
« on: April 14, 2017, 01:06:55 PM »
14020100 or 15020100 are the Flowmaster part numbers. Either 4 or 5 inch. http://www.flowmastermufflers.com/pro-series/They also have it in stainless Sent from my iPhone using Tapatalk
7018
« on: April 14, 2017, 01:00:01 PM »
5 inch is fine. It's actually 4 inches from the DP to about mid cab and transitions to 5. I have a 4 inch on the Dually and 5 inch on the LB7. I don't like they way any of them bolt together so I always take mine to a muffler shop to have additional hangers installed and weld the joints except for two so I can take it apart if needed.
Sent from my iPhone using Tapatalk
7019
« on: April 14, 2017, 08:14:52 AM »
Chrome should go. I have an 01LB7 and a build thread. Might see some ideas there.
I'd add a lift pump for extra filtration if nothing else.
I'm with you on EGR block. Never know when EPA may strike.
5 inch flo pro is the way to go. I run Flowmaster hushpower mufflers in both by trucks. Great sound but not loud.
I bought sound deadening and rolled it on all the doors. Made a big difference in the interior noise level.
Also look for some XTC foam speaker baffles in Amazon. Cheap and help the mid base in your door speakers.
Sent from my iPhone using Tapatalk
7020
« on: April 14, 2017, 07:38:29 AM »
You guys are going about this advice giving all wrong. I have the solution Dave.
You just need a dually with air bags
7021
« on: April 14, 2017, 07:25:33 AM »
Probably a little late now, but if I were building another trailer I would include a torque tube down the middle. Otherwise they can be a bit flappy.
I'm ramp neutral but I don't care for dovetails on anything shorter than 30 feet.
With those cankles, HRC needs a crane, not ramps
7022
« on: April 14, 2017, 07:18:29 AM »
 Need to have some hats made with this Sent from my iPhone using Tapatalk
7023
« on: April 13, 2017, 06:40:07 PM »
Do I recall correctly that this is a thermobaric device that sucks all the oxygen out of the caves? I bet the service men wrote some pretty cool sayings on it before they dropped it. Alla akbar
Sent from my iPhone using Tapatalk
7024
« on: April 13, 2017, 06:25:30 AM »
I havent done it yet. My loader hasnt given me a reason to yet. But it is well documented on orange tractor talk.
7025
« on: April 12, 2017, 10:14:31 PM »
So Ken on my Kubota, adding a shim the relief valve is the method. I assure you that if you search for a forum you'll find it and along with it detailed infomation on how to do it.
7026
« on: April 12, 2017, 10:12:04 PM »
Yeah, I didnt say I paid that. that was what they were asking. Its all about the lottery system and being able to get it. Basic scarcity of resources , supply and demand economics. People what what is scarce and there is not much of it so there are people that will pay that for it.
7027
« on: April 12, 2017, 09:27:14 PM »
Ken I think he was talking about the engine injectors and power. There are ways to shim the pressure relief on the hydraulic pumps to get more pressure to the cylinders.
7028
« on: April 12, 2017, 09:14:55 PM »
Hint: I think that's a ruse. Over 100k rpm rotation would make video nearly impossible and short range wireless would not work past about 90 feet for video upload.
Sent from my iPhone using Tapatalk
7029
« on: April 12, 2017, 09:00:21 PM »
 Sent from my iPhone using Tapatalk
7030
« on: April 12, 2017, 08:57:40 PM »
And a little lesson in the difference between being right and doing what's right in the public eye.
Sent from my iPhone using Tapatalk
7031
« on: April 12, 2017, 07:47:13 PM »
I bought the little HF mixer. Not a bad little rig for less than $200 when mixing smaller batches. Just don't put it on uneven ground and let it tip over backwards with 3 bags of concrete and water in it.. Makes lifting it up off the ground a bit of a challenge....don't ask me how I know.
7032
« on: April 12, 2017, 06:57:38 PM »
7033
« on: April 12, 2017, 05:50:33 PM »
It's a trick
Sent from my iPhone using Tapatalk
7034
« on: April 12, 2017, 05:42:29 PM »
Love Negan good one Shawn
Sent from my iPhone using Tapatalk
7035
« on: April 12, 2017, 05:21:10 PM »
 Sent from my iPhone using Tapatalk
7036
« on: April 12, 2017, 02:32:45 PM »
I just listened to the Rex tillerson ansd Russians joint preS coverage. Lots of diplomatic back peddling and some jabs by the Russians at Obama. Think the market will settle.
Sent from my iPhone using Tapatalk
7037
« on: April 12, 2017, 01:30:43 PM »
$78 per draw for the oldest pappy.
Sent from my iPhone using Tapatalk
7039
« on: April 12, 2017, 12:57:44 PM »
 Sent from my iPhone using Tapatalk
7040
« on: April 12, 2017, 08:50:38 AM »
Welcome GRN! Like Texas Redneck , it seems a bit redundant.
Sent from my iPad using Tapatalk
7041
« on: April 12, 2017, 12:34:02 AM »
About $25 a draw versus $50 for the pappys. This place has the biggest selection of spirits in south Texas. Very impressive
I can only describe it as a bourbon with very little to no vanilla. A hint of rye/wheat. Just my style .
Sent from my iPad using Tapatalk
7042
« on: April 11, 2017, 10:16:16 PM »
So I learned something today. There is an orphan barrel series bottled in tullahoma Kentucky that is barrels of distillers cuts. Tonight I had barterhouse 20 years. Wow. Almost as good as Pappys   Sent from my iPhone using Tapatalk
7043
« on: April 11, 2017, 06:57:46 PM »
With respect to our technology and the failure to root out the enemy. It's not because our soldiers couldn't it was because of crap ROE. If we were to take the muzzle off the dog, it will eat.
Sent from my iPad using Tapatalk
7044
« on: April 11, 2017, 05:16:40 PM »
Or you can read the side of the tube form and it will tell you. Bags/ft
Sent from my iPhone using Tapatalk
7045
« on: April 11, 2017, 03:51:09 PM »
Actually if you look close enough you'll see the blue longneck beer koozie in the cup holder
Sent from my iPhone using Tapatalk
7046
« on: April 11, 2017, 03:48:13 PM »
And for the next unsuspecting redneck
Sent from my iPhone using Tapatalk
7047
« on: April 11, 2017, 03:44:39 PM »
Don I'm jelly. Very nice. I think you had asked a question about concrete tube forms some where. I apologize for failing to respond. Would you repeat the question ?
Sent from my iPhone using Tapatalk
7048
« on: April 10, 2017, 11:50:55 PM »
Thanks Don. That doesn't make it any less spectacularly stupid, but thanks. :-)
7049
« on: April 10, 2017, 11:47:16 PM »
targets are about 75 yards on a rack. two 6 inch round gongs and two 3 inch gongs. She rings the 6 consistently. She was having trouble with the 3s and I noticed she was slapping the trigger pretty bad. Reinforced slow steady squeeze and gave her a single round. She banged out 3 in a row.
Then at 100 there is a steel popper. She hit that with no problem. Proud of her. Only about the 4th or 5th time she's shot and shes shooting subsonic 22lr with a 4x scope and a can.
Much better than when I was caught slapping the trigger......I had to carry the pimp cup and do pushups....
7050
« on: April 10, 2017, 11:43:12 PM »
Shawn, forgive my ignorance, but what about a gas engine rates having two batteries?
Pages: 1 ... 139 140 [141] 142 143 ... 224
|
Show Posts
