PERSONAL READINESS > Hide Site
Hide/Bug-out site construction thread, Part 2
Flyin6:
I then assembled the side piece and made a four legger out of the pile of stuff
Bigdave_185:
Looks good don
Raising boys into RealMen!!
Flyin6:
I cut all those notches on that cool Bosch construction table saw.
Next the tops went on, same technique...Glue, drill, screw the thing together
Flyin6:
Next I screwed in and glued reinforcements everywhere
Afterward the tables were as if they were one piece...no movement.
And just to test it, while I was working on the next project, one of my mid sized rangers came flying in the shop and hopped up on the table. It didn't even wobble!
Flyin6:
Those two are two feet wide by four feet long. Ill use those as end pieces and attach a center four foot section to make a nice twelve foot long work bench. You could be reloading thirty round magazines on one end while performing surgery on someone on the other...Plenty of room!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version