VEHICLES, CAMPERS, and BOATS > Tires, Wheels, and Suspension
Deere 2320 tire swap issue
moto123:
Guys I need some opinions or ideas on how to get these wheels mounted.
A little background, I am sick of getting punctures in the 4 ply turf tires and I have basically no traction. The tires were shot anyway. So I found these wheels for cheap. They are the same height, a little wider and a lot heavier duty. So I want to mount them up. I originally was thinking cut out the center of the rim and weld in a solid round plate. Then drill holes where I need them. Until I did a test fit. I need about 2 inches more offset. So now I am thinking I need someone to fabricate a spacer to go from 6x150mm on the hub to 6x8" on the rim. Thoughts, suggestion or solutions?
TexasRedNeck:
can you cut the mounting pad out of both and weld the old into the new with the correct offset?
moto123:
That's a really good idea. But I would still like to keep the stock rims for when I sell it someday. And keep them as extra if I somehow manage to damage these.
Sent from my SM-G920R4 using Tapatalk
stlaser:
You need to order a set of custom wheel centers, cut the stock ones out on new wheels & then weld in newly cut centers. Pm me what thickness you want them cut from, od & id measurements along with wheel mounting pattern & lug stud diameter. I can then get you a quote.
Edit: after looking at pics maybe just weld new ones in & leave old centers there as it does not appear there would be any issue doing so.....
Farmer Jon:
There is a company near me that custom makes wheels and adapters. Give them a try. They ship all over the USA.
http://dstiresales.com/default.htm
Navigation
[0] Message Index
[#] Next page
Go to full version