VEHICLES, CAMPERS, and BOATS > General Maintenance, How to/DIY projects
LBZ transmission hose leaking
Sammconn:
If you do any towing in excess of a few thousand pounds if get the heavy ones.
I think the smaller lose a bit of flow from what I've read.
If you're towing in any kind of heat, flow is your friend.
Bigdave_185:
I replaced mine last year before I drove to LA, out the stock line back in.
Sent from my iPhone using Tapatalk
JR:
Many write up on it. I did the Alli 1/2 lines. It is not a quick job, not hard either.
Your stock lines are 1/2, the aftermarket 1/2 neck down to 3/8 at fittings.
If I did it again I would repair the stock lines with fittings keeping full flow.
Sammconn:
--- Quote from: JR on April 24, 2017, 12:58:54 AM ---Many write up on it. I did the Alli 1/2 lines. It is not a quick job, not hard either.
Your stock lines are 1/2, the aftermarket 1/2 neck down to 3/8 at fittings.
If I did it again I would repair the stock lines with fittings keeping full flow.
--- End quote ---
That was the issue. And the reason I went with the 5/8 lines I suppose.
I'll agree with not hard but takes some time.
Navigation
[0] Message Index
[*] Previous page
Go to full version