This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 123 124 [125] 126 127 ... 270
6201
« on: February 04, 2019, 01:36:38 AM »
Going to get the front end weighed so I can order my springs and get this thing going. Yep, going to stay with springs and Deavers. Found a vid using the sliders, think they will be just fine and keep me lower. https://youtu.be/yoYrt9dO1ow
6202
« on: February 04, 2019, 01:32:53 AM »
Got covers for the battery terminals. It also starts easy all the time now so the effort was really worth it.
Got my 2nd set of spacers in, billet so they are stronger than most wheels. 2.5in with 14mm studs onto the 9/16 stock studs giving me a 4.5bs. This allows running the H1 wheels on the stock axles and can put on stock wheels if need be anytime. Thinking of running a steel outer shim so the H1 wheel bolts up to it flat and not into the machined surface with BIG holes.
If the rain quits this week I am going to put the front lift springs on to level this thing out. It has a 4 inch block in back and I can replace that with a 2in I have or just throw the new springs out back. I need the lift for the 37 tires.
6203
« on: February 03, 2019, 11:13:52 PM »
Wheels look good, just a little small for my taste.
Garage door opener on the fitz. Had a power outage, then a surge and it works when it wants to now. LM 8500. Have a new control panel on order. They are sending out new ones like warranty/over 5 years old!
6204
« on: February 03, 2019, 08:17:47 PM »
Those 500s are monsters and lightweight.
Just saw the donner in the superbowl halftime!!
6205
« on: February 03, 2019, 08:10:12 PM »
Like it all.
6206
« on: February 03, 2019, 04:30:59 PM »
Still sticking with leafs
6207
« on: February 03, 2019, 12:12:57 PM »
Funny, the guy I got my axle from was touting that guy big time. Even wanted me to go up to the shop but I didn't have time.
He had nothing but good to say about the guy, but was up front he was pricey.
6208
« on: February 02, 2019, 11:51:36 PM »
Seen those clips on TV. Evens em out, right?
6209
« on: February 02, 2019, 11:47:51 PM »
I have to get another set of high steer stuff for the DMax SAS, and rebuild the axle, get springs,,,,,,,,,,,,,,
Hey, I have the axle and the dmax!
6210
« on: February 02, 2019, 09:12:23 PM »
Fixed the "my bushings"
Will be my first front build, done several rears.
6211
« on: February 02, 2019, 08:43:53 PM »
Good looking rims. I can never get the offset right, plus = Neg???
Ordered spacers for the Burb to run the H1 wheels. Have two 2.5" already so that gives me a 4.5 BS.
6212
« on: February 02, 2019, 08:37:23 PM »
On the staircase, is there a brace under the lower step after the floor?
6213
« on: February 02, 2019, 08:32:05 PM »
Great work. Hope my bushings fit OK. I can machine though if required.
6214
« on: February 02, 2019, 03:09:34 PM »
Yep, needs a little lift.
Nice work!
6215
« on: February 02, 2019, 12:44:22 PM »
Use you foot if that close,,,,,,,,,,,,,,,,
6216
« on: February 01, 2019, 10:10:29 PM »
Engine?
6217
« on: February 01, 2019, 10:01:02 PM »
Both of those look good TRN.
Keep thinking about putting a ring here, new place for sure!
6218
« on: February 01, 2019, 07:31:42 PM »
Have you thought about a recoil pad?
6219
« on: February 01, 2019, 03:42:13 PM »
I doubt Roberts would follow any preset based on recent decisions.
6220
« on: February 01, 2019, 03:38:49 PM »
Hey, you know my wife!
6221
« on: January 31, 2019, 11:19:08 PM »
I like that. Out of sight but right there!
6222
« on: January 31, 2019, 08:20:57 PM »
Just an FYI really. To bad his kid was right there.
6223
« on: January 31, 2019, 03:16:33 PM »
6224
« on: January 31, 2019, 02:38:07 PM »
6225
« on: January 31, 2019, 01:29:47 PM »
Nothing new about that. Funny how we didn't even hear about it hear, or it was so short lived they buried it quick!
6227
« on: January 31, 2019, 10:13:14 AM »
Because cattle don't eat the equipment.
6228
« on: January 31, 2019, 10:09:28 AM »
Probably dads warm shop,,,,,,,,,,,
6229
« on: January 30, 2019, 10:26:24 PM »
Ever see the movie "Knowing",,,,,,,,,,
6230
« on: January 30, 2019, 10:24:36 PM »
Margaret Thatcher would have a field day with AOC.
Remember, its the "new math" where close enough is correct.
6231
« on: January 30, 2019, 10:19:30 PM »
Its global warming, cooling, er shifting. But think, in 12 years its all over anyway.
Now, does anyone here really think we can do anything about any of it?
6232
« on: January 30, 2019, 09:55:24 PM »
That looks so easy. Getting it out is the issue.
6233
« on: January 30, 2019, 09:46:58 PM »
Was a water bottle an approved signaling device?
6234
« on: January 30, 2019, 08:58:26 PM »
Cool, with that you have a type of bead lock! Now just fill em with foam and go.
6235
« on: January 30, 2019, 08:40:14 PM »
Like those.
So you are driving it as you work on it?
6236
« on: January 30, 2019, 04:41:07 PM »
Maybe it is time to see just what it will eat?
6237
« on: January 30, 2019, 03:04:38 PM »
I have heard that is the norm in New Zealand (was it here?)
6238
« on: January 29, 2019, 09:04:54 PM »
That reminds me I need get a 4x6x1/4 for the subs rear bumper.
6239
« on: January 29, 2019, 09:00:39 PM »
I mumble something like that in the morning while drinking coffee and working on the morning snap crackle and pop of my body.
I know the feeling!!!!!!!!!!!!!
6240
« on: January 29, 2019, 08:59:34 PM »
Sent from my iPhone using Tapatalk
6241
« on: January 29, 2019, 06:43:47 PM »
Starting at home??
Maybe
6242
« on: January 29, 2019, 06:40:04 PM »
Put a PVC liner in there.
6243
« on: January 29, 2019, 05:34:23 PM »
Gunna have to crawl under there!!
6244
« on: January 29, 2019, 02:50:25 PM »
Just really an issue when everyone is in a hurry to get to school. See parents and kids doing it. Most just merge with no issue, some just go all the way to the end and cause the issue.
6245
« on: January 29, 2019, 02:27:24 PM »
The signs say "lane ends merge left" The driver in that lane does in fact have to merge in front of some one right? As long as they are trying to merge safely, why not let them in?
Its a right turn lane only, no merge. No lane ahead just kids and crosswalks.
6246
« on: January 29, 2019, 12:41:33 PM »
Ordered a MAGA hat so I can have some fun.
6247
« on: January 29, 2019, 12:35:49 PM »
I consider any tool set a good deal when its under $1 a piece. I need to do some upgrades on my sockets, can't even read the old ones now the etching would be nice.
6248
« on: January 29, 2019, 12:31:04 PM »
My tuck alone is big enough for my antics. Kids at my daughters HS like to force their way in when the lane ends, I don't let em.
6249
« on: January 29, 2019, 12:27:51 PM »
I can cook fine and eat even better.
After my surgery I put on about 40lbs and now am diabetic (2) My blood sugar is off the chart lately.
6250
« on: January 29, 2019, 12:18:27 AM »
Don't think the 2002 non Allison has that issue.
Looks like it is a NP246 on the 4L80E.
I need that trans kit for my suburban.
Pages: 1 ... 123 124 [125] 126 127 ... 270
|