0 Members and 3 Guests are viewing this topic.
Don. There is a company that retro fits the stock headunit to have Bluetooth and line outs for an amp. Keep it stick looking. The bezel you speak of is only made in black Also if you ignore sage advice and do lift it. I need the crossmember and the little piece you have to saw off the crossmember mounting pocket please. Sent from my iPhone using Tapatalk
Well shoot, has anyone warned Rob about you yet?
Not sure about din but I had a unit of measurement in my shop called dim & it went something like this. You know that guy over their licking the window is really dim!
https://www.amazon.com/Metra-Double-Install-1999-02-Silverado/dp/B01D28EHYG/ref=asc_df_B01D28EHYG/?tag=hyprod-20&linkCode=df0&hvadid=312142335725&hvpos=1o2&hvnetw=g&hvrand=16126251238741970652&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9027124&hvtargid=pla-569790244024&psc=1https://www.silveradosierra.com/mobile-electronics/1999-2002-double-din-install-t450953.htmlAnd in case you want to do it the hard wayhttps://www.gmfullsize.com/threads/stereo-buildup-dd-convert-coming.77575/Sent from my iPhone using Tapatalk
That’s a good lookin rig too. I want a Burb when I get old now to. Sent from my iPhone using Tapatalk
I think leveled or a small lift would be about perfect. When it comes time for the bumpers let me know if I can be of assistance. I built a set for a 2001 2500 truck last winter. The front bumper was a cross between a 1500 and 2500HD I believe. The rear was the same 1500 bumper I build for every GM truck from 2001 to 2013.
That, and add in the cognito HD idler, truss kit, HD tie rods, flip the U-bolts (Shawn), and air bag itStill lookin' for that Ah-menRemember who you're dealin' with hereHold out too long and I'll have a 12" lift and tractor tires on it!
I know my name is Dave and I am fired but isn’t there a rancho 4 inch that would allow the 33’s more room? Tough country has one also Sent from my iPhone using Tapatalk
Quote from: Flyin6 on November 18, 2018, 11:25:19 AMThat, and add in the cognito HD idler, truss kit, HD tie rods, flip the U-bolts (Shawn), and air bag itStill lookin' for that Ah-menRemember who you're dealin' with hereHold out too long and I'll have a 12" lift and tractor tires on it!I do have some hd top plates for a ubolt flip
Quote from: Bigdave_185 on November 18, 2018, 11:40:16 AMI know my name is Dave and I am fired but isn’t there a rancho 4 inch that would allow the 33’s more room? Tough country has one also Sent from my iPhone using TapatalkBuy a quality small lift if you’re going that route, those are about rock bottom....
Quote from: stlaser on November 18, 2018, 02:23:12 PMQuote from: Flyin6 on November 18, 2018, 11:25:19 AMThat, and add in the cognito HD idler, truss kit, HD tie rods, flip the U-bolts (Shawn), and air bag itStill lookin' for that Ah-menRemember who you're dealin' with hereHold out too long and I'll have a 12" lift and tractor tires on it!I do have some hd top plates for a ubolt flipI'm still running yours on my D-Max truckI'll be putting together an order from you after I get the truckThe HD U-Bolt plates, a diff cover, not sure what else yet...
If you stick with a spindle loft your track width stays the same. Or do I have that backwards? Why are we not just ordering a kit from WFO and putting 37’s on this truck so the tires are double duty between the c max and the “S-maX”? Sent from my iPhone using Tapatalk
THis may be the most active build thread on the interweb that doesn't actually have a vehicle yet!
Keep in mind that on that year truck, the front diff on the drivers side dosent like to release the cv shaft due to the "C" clip that was used on the inside of that diff.
Keep in mind that on that year truck, the front diff on the drivers side doesn't like to release the cv shaft due to the "C" clip that was used on the inside of that diff.
2002 Suburban loaded on trailer and will be delivered tomorrow.Thanks Don!