This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 196 197 [198] 199 200 ... 270
9851
« on: October 31, 2016, 03:13:02 PM »
But he needs something for the Mall Mulch??
Weld a hitch on the rear drop whatever and he's good.
9852
« on: October 31, 2016, 01:28:56 AM »
Found you a dually:
9853
« on: October 29, 2016, 09:12:51 PM »
Heck I did over 1k just in the last week.
9854
« on: October 29, 2016, 09:11:31 PM »
I almost bought a bump fire stock yesterday. Just $130 now.
I love moving targets,,,,,,,,
9855
« on: October 29, 2016, 05:35:56 PM »
Scored a quick ratio 12;1 steering box for the elky from Summit.
9856
« on: October 29, 2016, 05:00:34 PM »
How old a truck you looking for? You put lots of miles on your trucks and the older dodge trannys did not have the finest rep.
9857
« on: October 29, 2016, 04:56:44 PM »
Close enough. I doubt real targets will be stopping at your set ranges.
Now you just need moving targets!
9858
« on: October 29, 2016, 02:32:14 PM »
Looks good and I see there is plenty of red grease to get on all the clean parts.
9859
« on: October 28, 2016, 05:30:35 PM »
You will be driving full time in no time.
Got a sweet garmin gps at cabelas(owned by bass pro now) cool little laser for my cc. Even a bax of 22 for cheap.
On the way to Fernley looking for an old friend.
Ok. Doesnt someone live here from here?
9860
« on: October 28, 2016, 12:46:33 AM »
On my way to Reno for a day. A little me time which I need.
9861
« on: October 27, 2016, 06:47:39 PM »
Just remember guys. New truck means a full fluid change starts over,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
9862
« on: October 27, 2016, 05:02:53 PM »
OMG, what are you looking at getting since SD isn't up yet?
9863
« on: October 27, 2016, 05:02:03 PM »
Wow, take it to SEMA.
9864
« on: October 26, 2016, 12:10:28 AM »
I gave up my Class A-B CDL when I retired. So many restrictions now, homeland security and such. Wish I kept a non-commercial.
That bow is simple for the little trailer. Got a HF tarp and $20 in metal today. No rain tomorrow so I can build!
I have something in the works for the 1101 trailer also with leftover stuff from a trampoline.
Any more updates on the money pit Bobby?
9865
« on: October 25, 2016, 03:28:26 PM »
You are dead on with the bars. Have the 5.9 with tranny and other parts in a old LUV bed trailer.
Cheap too being just 3/4 conduit. So about $30 invested there with the bender. Need a tarp then some angle for the bed rails. Weld a few pins on and done.
Yep, meant Tate. Got a buddy down the street named Nate.
9866
« on: October 25, 2016, 03:23:13 PM »
So far it works great. Angle head gets in there tight. Sinks nails really good. Have only charged the battery once and it still shows full after a month of storage and use.
9867
« on: October 25, 2016, 01:29:54 PM »
Thats great Nate.
We just came back from the Winchester Mystery House.
9868
« on: October 25, 2016, 01:15:21 AM »
Little more work on the stairs, Scout meeting and bent these;
9869
« on: October 25, 2016, 01:13:22 AM »
Got the facia cut, routed and sanded.
Glued and nailed with my new Fusion trim nailer. 15g angle trim nails, 1.25-2.5in no fuel cartridge. Uses a lithium battery compressing a cell.
9870
« on: October 24, 2016, 11:33:45 PM »
My nittos wore funny. Maybe just me.
9871
« on: October 24, 2016, 08:53:58 PM »
Discount/Americas Tires has priced match online prices for me.
Bigger lugs should drive better on the road.
9872
« on: October 24, 2016, 02:06:08 PM »
My stock adjusters seem to hold up fine.
Tires, that is the going price here too. I wait for sales if I can. Last time I got my 35's (tires and wheels) with promotions I got them for 1200, then sold my old set for 500.
9873
« on: October 23, 2016, 03:15:09 PM »
If I didn't have everything I would have jumped on this;
9874
« on: October 23, 2016, 01:25:34 AM »
Carnage? As Don said riding the little XR100,,,,,,,,,,,,,
9875
« on: October 22, 2016, 11:03:08 PM »
Walls sheetrocked and had some leftover laminate from the diningroom.
Got this pretty piece of clear pine for the cap.
9876
« on: October 22, 2016, 10:53:23 PM »
Hung a pulley in the tree for getting this up there.
9877
« on: October 22, 2016, 10:23:56 PM »
That is the new hillary-obama safe trigger.
First you give blood, then have it DNA matched and talk nice to the bad guy waiting for it to open.
9878
« on: October 22, 2016, 10:16:06 PM »
purdy
9879
« on: October 22, 2016, 02:44:41 AM »
Sure look good. Now get em on and dirty!
9880
« on: October 22, 2016, 02:42:35 AM »
Did you say it was 4 panels, or was that Don?
9881
« on: October 21, 2016, 11:20:26 PM »
Nice sign, like my bigger hammer or follow directions signs.
I didn't measure the slope it is guesstimate but it looks about a foot for the run. I didn't finish the math (2/12) but it would be .6 if my slop is that much.
9882
« on: October 21, 2016, 09:05:17 PM »
I am about as aero as you are, maybe a little lower.
Light trail bikes are nice, loved my old KTM.
9883
« on: October 21, 2016, 05:47:01 PM »
Nice install, the extra fluids will come in handy. How much was a larger tank compared to those?
Sean, how aerodynamic are you sitting in front of it?
9884
« on: October 21, 2016, 01:36:20 PM »
I like the tires and those are surplus now right?
Maybe like this;
M715.9
CUMMINS
TURBO DIESEL
9885
« on: October 21, 2016, 01:05:37 PM »
Not even a cool decal for improved aerodynamics???
That only works on toolboxes,,,,,,,,,,,,,,,
9886
« on: October 21, 2016, 10:20:18 AM »
I could see that with no emblems. Would look good.
Keep the tire thin for that classic look.
9887
« on: October 21, 2016, 10:15:24 AM »
If they had just slopped it form the original spot to over the vent, then turned vs that big S setup it would have been fine.
I am guessing at the 12in, but better more than none. Think I am just under double though. 20ft (240in) / 12in = 20. So I have just under 1/4 per foot.
9888
« on: October 20, 2016, 11:12:22 PM »
-70??
9889
« on: October 20, 2016, 10:19:27 PM »
DDS thanks for the info. Think I am good at 12in drop in 20 ft.
It wasn't all that bad being lit up well and having the tyvek suit on. Did find 1 rotted out rat (used to have a problem with em, now have cats)
9890
« on: October 20, 2016, 05:28:50 PM »
Yep, with those 2 heavywieghts and future spills will happen. Protect those feet!!
9891
« on: October 20, 2016, 01:36:41 PM »
Who needs a rolling seat with toys when you have a toilet!!
Brings back great memories,,,,,,
9892
« on: October 20, 2016, 11:06:18 AM »
Been trying to find a picture of the plug to verify I have the correct wires. Only takes about 5 min to pull it all.
I am thinking it is a break in the wire from the BCM to the dash and that would fit with just loosing all dash lights at once and the flicker.
9893
« on: October 20, 2016, 09:35:31 AM »
Alaska or Texas, Otherwise hunker down and hold on for hopefully only 4 years.
What will be left though if she gets 3 judges?
9894
« on: October 20, 2016, 04:26:22 AM »
I pulled it again, red has 9.4 volts? Used both column and blk for ground, same.
Many pins had 12v, some 7.4. Checked most of the fuses again, then even pulled the pins on the behind the cluster. Did the black wire, blk/wht, red, orange and a another red? both sets on either end of the plug, black always on the outside, next red, then one side had a skipped plug and another wire.
Still gets me that all the lights flashed (series?) and now the 4x4 indicator and dash lights are out. All other dash lights works and dim, even the 4x4.
Guess it is the dash lights. To bad I don't have another cluster to check first.
9895
« on: October 20, 2016, 02:02:07 AM »
lets be optimistic, but prepared (hold on to wallet and guns)
9896
« on: October 20, 2016, 12:41:25 AM »
I have not head spaced either FAL yet but thinking of adding a nice bolt action 308 to the collection.
9897
« on: October 20, 2016, 12:38:54 AM »
Big cup of joe, oatmeal with a little brown sugar.
Yeesterday;
Big cup of joe, bagel with cream cheese.
9898
« on: October 20, 2016, 12:34:44 AM »
I am sitting on about 2k of that and another k or so IMI stuff. Still kills me at .50 a round!
9899
« on: October 20, 2016, 12:31:40 AM »
Another thing to think of is the unrest if H does not get, or vis vera for Trump winning.
9900
« on: October 20, 2016, 12:29:19 AM »
Well, I got many calls for parts, some good but not enough to break it up and deal with selling all the parts.
Settled on $1800, but I kept the winch and sold 1 driveshaft for $100. So figure I'm in the low $2k range now.
Guy sent me a nice deposit and will pickup early Nov, which is about how long it will take to find everything and get it out of the yard!
Pages: 1 ... 196 197 [198] 199 200 ... 270
|
Show Posts