They are both neglected and dusty,,,,,,,,,,,,,,

Here is what it looks like now, just needs a little mud. The 2 upper panels are temp to block the roof/insulation/air issues.

Can someone guess what these are??

Looks a little better with sheetrock. I did have a little help pulling wires since getting in there is not fun for me. My youngest fits fine.

Well, onto other things.

Stairs are going great, check the thread.

Got these, both work great;

So I see now that I found thread #2. Still catching up.

Trying to catch up this Don, just on page 2.

Why would the Orion come up on this?

He is a wild card. That may be all that gets us by here.

I hear to many people who say they cannot vote for H, no matter what. The poles are twisted too, they even say they poll more D because there are more, really? I think if you add the independents in with the Rs it is a tossup.

I also think many who are for Trump are afraid to say it. Look at the poor guy in So Cal who had to be saved by the cops.

I fear if she gets in, she gets 3 justices and they say we may loose the senate to boot.

You need to look at the cognito steering items. The HD tie rods are junk but the pitman arm and the cross link have great upgrades.

I would do the CP3 myself. When I did the fittings it was not that hard once you slide it all off the top. Sure I didn't do my CP3, but I was right there.

Try youtube. At least you get pictures.

I used the cheap HF pullers, they worked fine. Heat helps as the arm is going in the garbage anyway.

Still bet you were smiling big,,,,,,,,,,,,,,,,,,,,,,

Just $120 huh? Mine is flattened on the bottom from sitting there. Think they would have used wood to the block base, it is so easy!!

I too like getting ALL the oil out, that sounds like a plan.

I love the stack and you were smiling more than the kid. Wait, you are the kid!!

Could you get a feeler gauge between the rods?

Maybe send out the oil to see what it really is??

I was thinking like an old locomotive where they got out to fill the oil reservoirs.

Drill it and put a grease fitting in there, done.

You sure it didn't drip from somewhere else?

They are a little cheaper on ebay plus you get battery backup!

We can talk about SD anywhere, no rules!

Something is fishy there for sure. Ask your mech if the seal he pulled has a part# on it. See how custom it really is for $85 !!!!!

From what you say it is not his fault unless you pay him big bucks. Buying it though may have included a disclaimer, but you still have the forums and Paypal. Sure you still a have a few contacts too.

I have the cognito UCA. More travel, greasable poly bushings with bolt in ball joints. The latter is important since they wear fast with or setups.

Very nice

Whats the first rule of real-man? 

1.  We don't talk about SD!

Thats not being a true DOT.

Quote from: Bigdave_185 on October 02, 2016, 11:58:50 PM

This is the first set to do me wrong, these have have 50,000 miles on them Don. No toyo MT is going to do that ever.  And this is probably my shortest tread tire.  Transmission has been helping the tire spin a little better


Sent from my iPhone using Tapatalk

Copy that!

I get about half that mileage on the MT's

But in my case, I think I really need to stay with an aggressive MT

You should have seen my truck Friday, crawling out of my hide. Tires rolled up mud, sticks, weeds, grass into some adobe mixture that changed them from 35's to something around a 37" I think. When I finally got to the road and started to accelerate, the clods of mud I sent flying went everywhere.

Yea, I need to stay mud tire...

But no pics or updates as SD rots away,,,,,,,,,,,,,,

I have a 1m policy too. Got that when I started as an LEO and now keep it as I have a ccw.

I used a budy's kabota and it was solid as a rock. They are all around here.

I used the copper AS. Had plenty of silver but the copper was recommended. No issues.

That would make sense with the plugs back there. They look half covered by the bell and with that 12 in puddle it is not small.