0 Members and 1 Guest are viewing this topic.
Is there any reason for 3/4 on the roof. Why not a thinner material. Covering the exterior with fiberglass or something anyway? Sent from my iPhone using Tapatalk
I guess it’s the typical after the fact but you could of added some slope to that roof. One direction of the other. But flat is good too Sent from my iPhone using Tapatalk
Thought that was an old tac topper pic at first!!!Fill those roof voids with sheet foam?
Food winter project Don. Btw how’s the boiler working??Sent from my iPhone using Tapatalk
like a tactical top, er something like that. ;)Sent from my iPhone using Tapatalk
Looks good and good idea on the blind nuts.For the Gen slider. Are you making your own or getting bearing drawer slide outs?
Looks like a second coat of primer wouldn’t hurt from my experience. As for your wood bondo prep it looks on point. Would you please post a link or identification for your roller glides you have for the fridge and the generator? We installed some 4” pull out glides for a home. $150 a drawer but rated for 800 or so pounds in the drawer. Terrible install process but man where they smooth!! Do we get a video of this roof open and closing? Sent from my iPhone using Tapatalk
I’ll just leave this here. http://www.glasteel.com/images/Product%20Range%20Catalogue_yes785Sent from my iPhone using Tapatalk
not sure if we have ever asked this question yet or not?!…….is the frau going to be or willing to stay in this?!
Your looking for a single strut? Why not double up. Two in each corner. Not sure the math but if one pushed 25 pounds wouldn’t two push 50? What about electric motors to lift it up? BEMONOC DC Linear Actuator Motor 24V 300mm 12" Stroke 16mm/s Speed 600N 132Lbs Force https://www.amazon.com/dp/B01N1NO6HF/ref=cm_sw_r_cp_api_i_NJneEbQBHQV67Sent from my iPhone using Tapatalk