0 Members and 9 Guests are viewing this topic.
Spent the afternoon fixing the forklift repair companies screw up....We have a Clark 1978 4k forklift which the water pump was going out in. Said forklift repair company brings in the pump they thought was correct for what motor they thought lift had. It bolted up to said motor with longer bolts and that is the extent of what was the same. Spent several hours and three trips to hardware getting parts and pieces made to get hoses hooked up. Plumbing 101, if you can’t get what you need make your own. This was two pieces of tube I pressed together and then welded adapting the one side of pump that had a 2.25” od outlet to the 1.75” radiator. Sent from my iPhone using Tapatalk
Put up 5 of the six cameras on the house now, need to run a attic run to put the last one in the garage. I want to have one in the top corner so I can see if people come in those doors or if they are open. That will double cover every door into the house Sent from my iPhone using Tapatalk
I thought that’s what the body was for?Sent from my iPhone using Tapatalk
Quote from: dave945 on March 19, 2021, 09:47:23 PMI thought that’s what the body was for?Sent from my iPhone using TapatalkLoLCharles, looks relaxing. Enjoy
Helping a local rc plane group fence off a landing strip area to keep the ATVs from tearing it up every weekend. It's 500ft x 1000.
You have to be careful with the HF torches. Sometimes they work with other valves body's, sometimes not.If the tips interchange, you are good (just the top piece that screws on) If you have a welding supply near you they may have used stuff, praxair in Sparks does. Normally rebuilt for a nice price.
Davetake the torch body to the local welding supply and they probably have a cutting head for that in stock You can also get a rosebud tip which is great for heating up siezed bolts. Tell them the thickness of steel you are going to cut and they will size you up with the correct tip. ask about gas and oxy settigs for your regulators which will be different based on tip and thickness of steel.
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.