Hello Guest

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - JR

Pages: 1 ... 152 153 [154] 155 156 ... 270
7651
Build Threads / Re: 2000 XJ
« on: March 17, 2018, 03:53:47 PM »
I hear you, and they have found the nasty little things!

7652
What are you building? / Re: Upstairs Add On started
« on: March 17, 2018, 03:52:24 PM »
I will get you pic for reff. I think 1.5 will be OK. I wanted a little give in mine.

Here are the 2 copper lines and the control wire wrapped in vinyl (included) running through a 2 in hole.

7653
Build Threads / Re: 2000 XJ
« on: March 17, 2018, 01:51:14 PM »
Funny, I won't let my kids work on anything in the garage without shoes.

Nice job there Baylee. Are you welding too or is that dads job?

7654
I knew he said it earlier, just didn't feel like looking.

7655
What are you building? / Re: Upstairs Add On started
« on: March 17, 2018, 01:20:31 AM »
I cut 2" holes to run mine and have room to spare. That is after it was rapped so I could feed it all through.

The comp and head have diff drain lines. Comp just dumps out the bottom but sure you run it somewhere.

Looks like the head drain line is around 3/4 and normally does not run with the hard lines. They do come out the same exit hole in the wall, but then it goes its own way.

What did you get?

7656
Hide Site / Re: Hide site, retirement site.
« on: March 17, 2018, 01:13:05 AM »
Looks great!

7657
What size was your lot?

7658
Hide Site / Re: Hide site, retirement site.
« on: March 16, 2018, 11:18:28 AM »
Mine is salt water also. I like to keep it covered so it stays really warm!

I have the same style sweeper, but the pump needs new bearings.

7659
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: March 16, 2018, 10:24:00 AM »
Heck, I broke spindles and teeth all the time. But never lost a tire or hoses like BD does.

7660
Build Threads / Re: 2008 Jeep Jk 4 Door
« on: March 16, 2018, 10:22:26 AM »
I use it to clean the area for welding on hard to reach places, works great even for a HF unit.

I want to see the welding so I can beef up the 60 front and 14bt just a tad.

5:43 gears, a real crawler.

7661
Not very stealthy, but who cares!!

7662
Build Threads / Re: 2008 Jeep Jk 4 Door
« on: March 15, 2018, 01:03:15 AM »
Thinking about clearance on top too, tends to be snug up there. Maybe just a good ol bar truss across the bottom. Loose a little clearance is all.

7663
What are you building? / Re: Upstairs Add On started
« on: March 15, 2018, 12:58:03 AM »
Bullnose are smooth as a babies bottom but thx for the idea.

However I got nothing done today but buying carpet for the stairs. Between running kids, diner, seeing mom (just bought her a scooter, https://www.amazon.com/Drive-Medical-Compact-Travel-Scooter/dp/B00GPGKN4G )

7664
Build Threads / Re: 2008 Jeep Jk 4 Door
« on: March 15, 2018, 12:33:38 AM »
Never welded to cast. Do you use SS wire as I have heard?

Sure my D60 on the Sub will benifite from a truss with that 1000lb above it.

7665
Share Your Recipe / Re: whats for dinner tonight
« on: March 13, 2018, 01:52:08 PM »
Tate, I would weigh 400lbs if I lived near you just copying all that good stuff.

7666
What are you building? / Re: Our House
« on: March 13, 2018, 11:03:45 AM »
Very,,,,,,,,,,,,,,,,,,Nice. Is that a bonus in the closet sleeping on the floor?

So hardwood throughout and carpet in bedrooms?

7667
What are you building? / Re: "12 Square" a 12' X 12' shed project
« on: March 12, 2018, 11:55:36 PM »
Looks like above average work as expected. Nice job getting them done.

7668
What are you building? / Re: Upstairs Add On started
« on: March 12, 2018, 08:53:12 PM »
150' roll of tape and I'm 3' short, have to use the mesh for that. 2nd box of mud, not wasting much.

Both the outside corners are bullnose, came out good. As long as the peak comes out good, I'll be happy.

7669
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: March 12, 2018, 08:23:32 PM »
Been looking at the new Sig 365. Not that it would replace my Shield 40 or XDS, but 10/12 rounds in a sub compact is cool.

7670
What are you building? / Re: Upstairs Add On started
« on: March 12, 2018, 08:19:14 PM »
Tape the closet, skim coat the rest. Going to dig out the airless for the PVA/paint, then use a textured roller on that.

7671
What are you building? / Re: Upstairs Add On started
« on: March 12, 2018, 07:38:18 PM »
I hate mudding, I hate mudding,,,,,,,,,,,,,,,,,

7672
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: March 11, 2018, 01:14:27 AM »
We had a funraiser for the band/USO last night. I ended up buying a bunch of brownies and cupcakes the kids wanted. Mostly gone now as they found em today. $65 for the batch (silent auction)

Got to get a handle on this one though, 15 and 5'10" now. (tall one in the black dress)

This VET got a standing O from all. This list was to long to remember, he is 102 now and did dance!

7673
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: March 11, 2018, 12:24:17 AM »
Looks like a nice rig. Rail, long safety tang and contoured mag well.

Nice thing about a 1911 is you don't need a threaded barrel even for a comp. Just use the barrel nut and they are cheap and can be had ported!

7674
D.O.T. / Re: SpaceX launch
« on: March 11, 2018, 12:16:37 AM »
Cool vid.

7675
Hide Site / Re: Hide site, retirement site.
« on: March 10, 2018, 10:58:12 PM »
I have the same, a 1650sf house with a 200main and 100 sub to the garage.

7676
Funny how that all makes more sense than many other explanations.

A little slap to get you pointed in a better direction.

7677
Don you might want to consider looking on CL or elsewhere for a used gates hydraulic hose maker and keep some supplies around.  Bet it would pay for itsself PDQ

That had just gone through my head when I read yours!

 :likebutton:

7678
D.O.T. / Re: Does the new GM truck look like a Toyota?
« on: March 10, 2018, 01:38:39 PM »
Wilber, the 07 to 12 were diff. Then they got real busy with the 13 with both being the same. If they had just kept the wells squared off a little more, that has been there shape since 72.

7679
D.O.T. / Does the new GM truck look like a Toyota?
« on: March 10, 2018, 02:33:00 AM »
Sans the grill, I think it does and GM even rounded out the wheel wells.

7680
So besides all the above obvious issues and the so called birth cert that used names and titles that wern't around when he was supposed to be born in Hawaii.

He may have people disappear than the Clintons did, but we can't find em (or the bodies)

Plate sure looks like a match, as do the buildings and vehicles of that era.

7681
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: March 10, 2018, 01:38:27 AM »
That looks great Don.

7682
Well, you knew it had to happen. At least its friday and not late Sat or Sun so you can get hoses.

As for the dents, are you taking a run at em or what? Maybe cut some next size up tube in half and bolt/tac weld it on?

Sounds like you are happy with it so far, doing its job well?

7683
Hide Site / Re: Hide site, retirement site.
« on: March 09, 2018, 07:49:22 PM »
That is sweet!!

7684
What are you building? / Re: Upstairs Add On started
« on: March 09, 2018, 07:48:08 PM »
A little more and a view.

7685
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: March 09, 2018, 12:34:04 PM »
I just passed 150k also, close to oil change time. I now change when recommended but us the 1qt bypass to superclean.

7686
What are you building? / Re: Upstairs Add On started
« on: March 09, 2018, 12:28:57 PM »
That crossed my mind late last night. Full rooms will be that way from now on.

7687
Everything Trailer, Camper, or RV related / Re: Toter-home build.
« on: March 09, 2018, 12:26:23 PM »
All that room up front and passengers can ride in the trailer too!

Nice progress.

7688
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: March 09, 2018, 03:31:42 AM »
Mudding for 8 hours. Out of mud and still on the first pass.

7689
What are you building? / Re: Upstairs Add On started
« on: March 09, 2018, 03:07:00 AM »
Just mudded for 8 hours, I'm tired and still not done on the first coat!

Just the closet on ceiling center left and ran out of mud, so Lowes gets a visit in the morning.

7690
The whole west coast is going to ell. Maybe northen ca may be saved. Just hope I get out before it goes farther.

Dealing with some school issues and him now. He got railroaded and parents have few rights in Kali. I have a meeting that will do little good tomorrow, but I have to try.

Norm, that reminds me of the John Wayne saying, "Life is hard, and even harder when your stupid" But then I found this;

7691
Gun Control / Re: Trump to Sessions “ban bump fire stocks”
« on: March 08, 2018, 06:36:45 PM »
I agree again Norm on gun training. I have drummed this into all my kids.

Plus it is safety in general, using some common sense. That is so lacking these days, just like regular families. Notice how most here have regular families and support systems?

On the stop sign, I had a similar occurrence when on patrol a few years back. I was sitting at a T in the road where I had to turn L/R on a gravel road and saw headlights behind me. They came up fast and I moved over and they drove right by into an open field sliding sideways until they stopped. When I came up to them it was some kids just messing around. No damage and no wants so I cleared em. They were lucky there was no canal or ditch on the other side which very common here.


7692
Gun Control / Re: Trump to Sessions “ban bump fire stocks”
« on: March 08, 2018, 04:27:56 PM »
Following on that Norm here is Kali we have a basic safety course you have to pass to buy a firearm.

Plus you must be able to store safely. Simple as a cheap safe, which for most of us is common sense anyway.

I for one have no problem with this, but I still have access to a gun or 2 all the time.

Common sense and firearm handling should go hand in hand. But like many things today, common sense is lacking.

7693
What are you building? / Re: Upstairs Add On started
« on: March 08, 2018, 02:14:22 AM »
Played in the mud today, more to come!

7694
Gun Control / Re: Trump to Sessions “ban bump fire stocks”
« on: March 07, 2018, 04:52:00 PM »
Adding more laws won’t fix the moral decay in our society.

 :likebutton:

Must agree  :likebutton:

7695
Gun Control / Re: Trump to Sessions “ban bump fire stocks”
« on: March 06, 2018, 11:12:51 PM »
All we need is to follow the laws we have as said.

From what I am hearing, the Florida school district was under a program called "promise". The head of the district is from Chicago and guess who he has ties with, BHO.

Basically it lets the school deal with almost everything in house leaving LE out of the picture unless it is a major issue. Theft up to $300, vandalism to $1000 and even battery. Teachers aren't told of the problems, kids are shuffled school to school as they get in trouble.

As for the NCIS system, like any data base, garbage in, garbage out. I know I used to have full access to the system, that all changed around the early 90's. You needed a reason to use it and it was tracked.

Anyhoo, we sure don't need more laws. Banning bumpstocks to ammo won't change a thing. Heck you can build an AR for under $500 now or buy one.

On another note, I want to see what Sessions says tomorrow about "sanctuary" states and cities. We just had a local mayor (oakland-female) who told the public about raids in the area. Says to the Fads, come and arrest me! Love to see her locked up or at least drug into a court to answer somehow.

Sounds like this sheriff is a real piece to. He is passing the buck and saying how great he is. Sounds like the deputies were ordered not to go in as the killing was going on.

7696
Everything Trailer, Camper, or RV related / Re: Toter-home build.
« on: March 06, 2018, 10:53:51 PM »
Nice work

7697
Gun Control / Re: Trump to Sessions “ban bump fire stocks”
« on: March 06, 2018, 06:17:06 PM »
Not finding it now but many states require a copy of this form is sent to that states DOJ. I know they do it in Kali and a few others, but it is per state not a fed law.

But I would disagree on the feds not knowing as they know EVERYTIME a search is done on NCIS, by who and for who.

7698
Gun Control / Re: Trump to Sessions “ban bump fire stocks”
« on: March 06, 2018, 05:56:35 PM »
I agree Charles. Voter ID (which is law in 34 states) and the wall.

Getting them to follow the law is a big issue, 4473 is just the tip of it.

7699
Gun Control / Re: Trump to Sessions “ban bump fire stocks”
« on: March 06, 2018, 01:08:51 PM »
Well Norm, when you do post you NORMALLY hit the nail on the head.

Yep, they know who we all are, somehow. I remember going on calls and we could ref. what weapons are registered to the call

One off the good things is they will never get them all no mater how hard they try. Of course that would make many a citizen a criminal but whats new?

7700
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: March 05, 2018, 11:55:31 PM »
Funny, we had several "discharges" when I worked but most were in the locker rooms. Checking a cleared weapon!!

Pages: 1 ... 152 153 [154] 155 156 ... 270
SimplePortal 2.3.6 © 2008-2014, SimplePortal