0 Members and 1 Guest are viewing this topic.
I would just go with it as it is, talk to brian and see what the issue was/is and fix/finish when you return from trip.....time is getting short.
So, Bobby...being the calculating trained warrior NCO that you are. Take the appropriate action, Execute!
your standard grunt level CQB is just putting rounds and rounds on scary stuff till it stops scaring you!
Couple of correctionsFirst the bumper "Shims" I posted are actually the light tabs for the front bumper lights...My badNext, have been speaking to Brian. He thinks the front Suburban and 2500 truck are the same, so we should be good with the front fitment. Will know shortly.I'd say that if I can get the rear to mount up, and I should, then all that remains is sorting out the spare tire/bin carrier arm. Not sure how that ends, but that should remain the only problem.On cutting off the lower quarter, I actually thought about it earlier. I did it with my Tundra years ago and built a wrap around bumper/slider affair. Not now, but may go that route after the trip as some have suggested, actually those two brothers, Dave and his older brother, Shawn. (He-he)
Quote from: Flyin6 on April 13, 2019, 01:08:33 PMCouple of correctionsFirst the bumper "Shims" I posted are actually the light tabs for the front bumper lights...My badNext, have been speaking to Brian. He thinks the front Suburban and 2500 truck are the same, so we should be good with the front fitment. Will know shortly.I'd say that if I can get the rear to mount up, and I should, then all that remains is sorting out the spare tire/bin carrier arm. Not sure how that ends, but that should remain the only problem.On cutting off the lower quarter, I actually thought about it earlier. I did it with my Tundra years ago and built a wrap around bumper/slider affair. Not now, but may go that route after the trip as some have suggested, actually those two brothers, Dave and his older brother, Shawn. (He-he)Shoot, you and Shawn could probably knock out that mod in a day, just crash at his shop for an overnight!
OUCH!!!!
Quote from: wyorunner on April 13, 2019, 02:04:23 PMQuote from: Flyin6 on April 13, 2019, 01:08:33 PMCouple of correctionsFirst the bumper "Shims" I posted are actually the light tabs for the front bumper lights...My badNext, have been speaking to Brian. He thinks the front Suburban and 2500 truck are the same, so we should be good with the front fitment. Will know shortly.I'd say that if I can get the rear to mount up, and I should, then all that remains is sorting out the spare tire/bin carrier arm. Not sure how that ends, but that should remain the only problem.On cutting off the lower quarter, I actually thought about it earlier. I did it with my Tundra years ago and built a wrap around bumper/slider affair. Not now, but may go that route after the trip as some have suggested, actually those two brothers, Dave and his older brother, Shawn. (He-he)Shoot, you and Shawn could probably knock out that mod in a day, just crash at his shop for an overnight!Turner, he referred to Dave as my blood relation. Realize my shop is in a secured gated facility, there is a reason for that......
Seen the Jeep crowd mount them to the hood, other folks mount them to the side of the luggage rack, that bumper looks awfully nice to mess up the lines with a clunky jack Did ya notice all the extra storage room under that rear quarter panel ? When is the new tow hitch due? Sent from my iPhone using Tapatalk
it's looking heavy Don.....the burb