Here is the roof which seems to be common for the older GMs.

Pulled the tires and wheels off (sold for $100) and got these new steel wheels for $60 and 33" coopers for $800. 

Ebay and cut about 30%

Ncstar red/green dot knockoff, 1x works great!! He played with a few scopes and went back to that, likes 62 gr best.

Surprised this hasn't found its way to you yet;

http://shoraipower.com/

That video was on a heli I was flying and you can see the feedback on the old systems.

I think the first one on the list above will do what you want, but you must supply your own camera. The one from Horizon will have the most support for parts and I have watched them in use.

These quads really fly themselves, you just point it or program it. (HLS has some issue with this stuff) The heli I was flying was a basically a miniature collective pitch heli, all it had was a heading hold gyro, I did the rest.

OK, who has a nice carrier and why do you like it?

I have several panels and plates but all my carriers are for under clothing, I want a "Go" type carrier.

I think this is back on topic.

Well guys, Don pulled me into this too.

Although I am not a nerd with all the techie stuff, I understand it and fly RC aircraft (about 45 years)

The camera systems out there can be simple or whatever your pocket can handle.

You can simply take pictures or video and download or do realtime, but the price goes up.

Plus anyone can fly now with the gyro systems out there. If you have seen the new transformer movie, many shots are from a 6 rotor radio control copter. The heli and the cameras are gyro stabilized.

Here are a few links to wet your interest;

http://www.hobbyking.com/hobbyking/store/__55141__Quanum_Nova_FPV_GPS_Waypoint_QuadCopter_PNF_.html

http://www.horizonhobby.com/products/350-qx2-ap-combo-rtf-with-safe-reg-technology-BLH7900

http://www.draganfly.com/uav-helicopter/draganflyer-x6a/

 http://www.skycamusa.com/gallery.shtml

Now if this goes you going just open your wallet. Planes will work too, and some are so small you can just throw and catch (it does take practice) and planes tend to be MUCH quieter and can glide.

Nice stuff there Don. I opened up the safety area a little to much on a 300aac build of mine and the JB filled it fine (pistol). Time will tell though.

I understand many of the military M4s use that method for the pins too. Makes sense because pins fall out way to easy.

See you are a Magpul fan too :D

Supposed to get a 16 inch upper tomorrow from Aries. Chambered in Wilde 223, full float 16 inch with m16 BCG (they had the uppers for $399, now 425) Picked up a spare BCG both in phosphate($80) and Nickle Boron ($100)

Pick up my duty G22 next Tuesday but they boned me and only gave me a 10 round mag, can you believe that!!!

With what they do to gas today, or tomorrow who knows what will hold up.

If you are going to do a cammo wrap just do that. Just get it perforated and it should be fine.

(darn I wrote this at 1400, how did it get down here!)

Order the color you want for that part. Trick is from what I have read i to paint and decal before you put gas in it. You need to use the porus decals.

I have a black tank,,,,,,,,,,,,,,,,,

Oh ya, I know about the kit and the fix. Know I don't have long in this condition but the fluid loose has stopped with the JB as I did have a hole.

Do you think the plate or the whole new pump plate, and which case? There is both alum and the alloy that is stock, both are around 2 bills.

THX

Yep, I got it at around 95 K. Thought it was the rear seal at first and talked to Nate about.

Since this IS an issue with looks like pre 07 Dmaxs, what repairs have you guys used?

Right now I did the epoxy fix to hold me for a few more weeks and filled her with 5/30 synthetic.

I also plan to ad to the skid plate that stops just past the tcase that may save it once if going forward, but will do no good otherwise.