0 Members and 1 Guest are viewing this topic.
This should be fun!I think it is time to start reloading againSo let's set up a respectable (Not over the top) reloading operation from scratchI want to reload:Pistol: 9mm, .45autoRifle: 5.56mm, 7.62mm. 6.5 PRC and possibly 45/70 should I be able to find one.Shotgun: 12 gageIf I had to start with just a few, then: 9mm luger, 5.56mm and 7.62 X 51I'll need:A pressTumblerpowder charge measuring somethingprimersbullets (varied and mixed)casespowderWho knows what elseSo let's see what you all suggest I buy...
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.
And when you get a little more sophisticated at developing your own loads or for long range, knowing the exact muzzle velocity out of your weapon is key.A good chronograph is a must and I always run my loads over the chrono. Reloading manuals and software both tend to be a tad conservative so its always best to use velocity as one indicator of when you are approaching a hot load and also the standard deviation of 5 or 10 shots will give you an indication of consistency which is key for long distance accuracy.This is what I have and I really like the printer function. I can tape the printed output to the logbook page.https://oehler-research.com/product/35p-complete-kit/This is what I will likely get next https://www.midwayusa.com/product/1016447132?pid=523157Sent from my iPad using Tapatalk
Quote from: TexasRedNeck on October 09, 2021, 11:18:28 AMAnd when you get a little more sophisticated at developing your own loads or for long range, knowing the exact muzzle velocity out of your weapon is key.A good chronograph is a must and I always run my loads over the chrono. Reloading manuals and software both tend to be a tad conservative so its always best to use velocity as one indicator of when you are approaching a hot load and also the standard deviation of 5 or 10 shots will give you an indication of consistency which is key for long distance accuracy.This is what I have and I really like the printer function. I can tape the printed output to the logbook page.https://oehler-research.com/product/35p-complete-kit/This is what I will likely get next https://www.midwayusa.com/product/1016447132?pid=523157Sent from my iPad using TapatalkI've never had good luck with a labradar. Seems to always miss a shot or pause etc.. I use a Magneto Speed and have never had an issue. The only issue is that you attach it directly to the end of the barrel and it can cause a POI shift even with the heavy barrels I shot.