Hello Guest

Author Topic: How to relocate shock brackets GM for more ground clearance (Free)  (Read 2905 times)

0 Members and 1 Guest are viewing this topic.

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
How to relocate shock brackets GM for more ground clearance (Free)
« on: September 28, 2014, 04:37:57 PM »
Asuming you are a crafty fellow and own a grinder and a welder or can borrow one, here's a neat little trick for you

Did you ever notice how low the shocks hang below the axle tube?

Well in a word, too low...well, OK that's two words.

They tend to catch on all sorts of stuff and actually constitute the lowest point on the truck except for the big diff.

We'll use a 2011 Chevy Silverado 2500 for this conversion (C-Max) from this site

Here's the stock bracket just waiting to hang you up on a rock or some road debris:
« Last Edit: October 11, 2014, 05:16:18 PM by Flyin6 »
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #1 on: September 28, 2014, 04:41:06 PM »
I took some before shock measurements so I'd know if I needed to move snubbers to prevent over stuffing this pretty shock.

BTW, if you are lifting, say around 3"-4" you can just reuse your stock shocks if you like them when you relocate this bracket.

I wanted a lot more droop-put while maintaining about 4" of stuff
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #2 on: September 28, 2014, 04:44:31 PM »
You might have noticed that these Fabtech supplied dirt logic shocks only had maybe 2" droop remaining, clearly not enough and I'd call them on that as a poorly engineered length for that shock

My mod will bring it much more in line with a slow moving terrain destroyer

Remove it by cutting the factory welds with a grinder
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #3 on: September 28, 2014, 04:47:36 PM »
I bolted the old shocks back on just in case I needed to drill them and weld them to a specific length for setup

Next after cleaning the axle where I was going to weld to, I leveled the bottom of the repositioned bracket and tacked it up
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #4 on: September 28, 2014, 04:49:25 PM »
Looking a lot cleaner already!

Big increase in clearance...over 3"
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #5 on: September 28, 2014, 04:51:19 PM »
Then just repeat for the other side and you have completed a cool afternoon, free project that makes a difference
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #6 on: September 28, 2014, 04:54:12 PM »
4" of stuff on the shock

13.5" ground clearance

and

a smoothened undercarriage

Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Anthonymo

  • Guest
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #7 on: November 04, 2014, 09:07:20 PM »
Awesome, saving this for my dodge after I do the shackle flip

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #8 on: November 05, 2014, 12:44:43 PM »
Sorry, you can't...legally

I copyrighted it!

I charge a cup of joe for permission to proceed!

Let me know when you're ready  ;)
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Rescue Man

  • Registered
  • **
  • Posts: 4
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #9 on: December 11, 2014, 04:47:01 PM »
I probably just missed this in your C-Max build, but where did you source u-bolt flip plate and u-bolts?

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: How to relocate shock brackets GM for more ground clearance (Free)
« Reply #10 on: December 11, 2014, 06:13:26 PM »
Contact stlaser this site

or

go to

Great Lakes Off Road, ask for Shawn

He made those for me and used to do them one off when a customer contacted him

If that doesn't work, I'll contact him for you but charge you tax...one cup of Joe for the effort!

Or maybe I'll be in a good mood and do it for nada!
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

 

SimplePortal 2.3.6 © 2008-2014, SimplePortal