Hello Guest

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - DDS

Pages: [1] 2
2
Well, a year has gone by & although we didn't get a ton of snow, this is still the right machine for me. I ended up adding a 2" lift, different tires/wheels & a remote start.

3
side shot

4
2

5
2

6
Well, a year has gone by & although we didn't get a ton of snow, this is still the right machine for me. I ended up adding a 2" lift, different tires/wheels & a remote start.

7
Build Threads / Re: New toy '93 M998
« on: January 17, 2024, 08:23:05 AM »
Those are some good looking doors. How do they seal? I know the fiberglass doors on my HMMWV back in my Scout Plt days leaked like a sieve every time it rained. LOL. Had to get used to leaning inboard.

They currently leak like a sieve because of the soft top. When the hard top gets fabricated, I'll also install a rain channel & new jambs for a tight seal.

8
Build Threads / Re: New toy '93 M998
« on: January 16, 2024, 01:59:22 PM »
Those look good. Full rear cover?

My plan is to keep the bed & enclose the cab with a 1/4" aluminum curtain. I'll also install the biggest piece of glass I can fit.
I like the hard doors a lot too.
We have a M998 for sale on a local lot up here. They are asking $13K ish for it. Is a really low mileage unit but with the 6.2. The soft top is pretty good but the plastic windows have yellowed. I thought about it.

If you don't mind saying, about how much are the doors?

I think I paid just shy of $3K. They're not OEM, but better than the other options in that price range.

9
Build Threads / Re: New toy '93 M998
« on: January 16, 2024, 11:17:30 AM »
Those look good. Full rear cover?

My plan is to keep the bed & enclose the cab with a 1/4" aluminum curtain. I'll also install the biggest piece of glass I can fit.

10
Build Threads / Re: New toy '93 M998
« on: January 16, 2024, 09:06:13 AM »
I ended up purchasing fiberglass doors from a Corvette shop in Georgia, guess he makes more money doing these than working on Vette's? I have all the aluminum to make the top/rear, just need the time. I love this thing so much, it's actually my dd. I'll hopefully repower it this year with another 6.5, but go with a 4spd.

11
Message from the Owner / Re: Where do we go from here?
« on: October 12, 2023, 08:40:45 AM »
I can probably count on one hand how many times I've posted/commented on something, but I've been here since day 1. I do not partake in any type of social media stuff, but I religiously go on this site daily. I'm a man of few words, but I'll surely miss this place if it ever goes.

12
Well, here she is...


13
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: February 07, 2023, 07:33:23 AM »
After almost 13 months, I finally received a call. The dealership is receiving 2 this week & one of them is mine. They are 2+ weeks out on accessory installs/prep, so I'll hopefully see it by the end of the month.

14
Hand Tools, Power Tools, Welders, etc / Re: Langmuir Crossfire Pro
« on: December 02, 2022, 08:19:13 AM »
Let me know how you like it. I just picked up a Miller 625 Xtreme plasma myself.

15
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: December 02, 2022, 08:15:30 AM »
I live in MA. Do you know if they have one available? contact?

16
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: December 01, 2022, 08:15:00 AM »
I called the salesman lastweek. They have received 1 unit in the past 2 months. I'm now #6 on the waiting list...

17
Build Threads / Re: New toy '93 M998
« on: October 10, 2022, 08:01:12 AM »
I contacted a few places regarding door hardware. I asked if I could buy everything minus the actual aluminum. For what I was quoted, I'm just going to buy the entire kit. I'll make the roof & rear panel with the 1/4" sheets I have.
Have you looked on govplanet? I often see miscellaneous parts and pieces for these at our local lot as I have notifications set up to let me know when things are added there.

I haven't, but to be honest, I'm not sure how shipping works with that site which is why I haven't tried buying anything from them.

18
Build Threads / Re: New toy '93 M998
« on: October 06, 2022, 08:26:20 AM »
I contacted a few places regarding door hardware. I asked if I could buy everything minus the actual aluminum. For what I was quoted, I'm just going to buy the entire kit. I'll make the roof & rear panel with the 1/4" sheets I have.

19
Build Threads / New toy '93 M998
« on: October 05, 2022, 10:49:22 AM »
I've always wanted one of these for the longest time & finally own one. It's a 93 M998 with the 6.2l & a 3sp. It came with a rod knock & so I'm currently in the search for a replacement 6.2. I'd like to replace it with a 6.5T & a 4sp, but not sure if I really wanna get into that. I simply want something reliable. It came with a soft top & doors. My plan is to fabricate a hard top, back wall & doors all out of 1/4" aluminum. I already have the sheets, just looking for a good time to start it.

20
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: October 03, 2022, 07:41:50 AM »
Wow! That's too long of a lead time. Productivity for the summer just went out the window, along with the fall too!

My initial hope was to have it for plowing season, it's getting close...

21
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: October 03, 2022, 07:40:31 AM »
Is it still going to be a 2022? 


Sent from my iPhone using Tapatalk

Haha, at this point, probably gonna be a 2023?

22
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: October 03, 2022, 07:39:27 AM »
Wow. That’s a long lead time. How’s the baby Dmax doing?  Been reading on them and the 100,00 mile oil pump belt replacement had me scratching my head.


Sent from my iPhone using Tapatalk

The baby Dmax is about to turn 100K. Aside from the wiring issues I had early on, it has been relatively trouble-free for the last 70+k. It has the 2.8L, I believe the oil pump belt is on the 3.0 V6

23
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: September 29, 2022, 08:34:30 AM »
Well, it's been 8 month so far & still nothing from the dealership...

24
Build Threads / Re: LML Duramax build part 6
« on: August 03, 2022, 09:08:49 AM »
The centrifuges are awaiting parts like everything else in the 'merica!

So time to move forward and do some much needed parts replacement on this aging truck

So far the truck has amassed 138,000 miles which is a pretty low number for an 11-year-old, about 12,500 a year.

It needs one exhaust manifold gasket, and that is sitting on the shelf.
I need to do something about the front tires rubbing. I lowered it an inch or so about 6 months ago and now it rubs on every turn when I hit a bump. Honestly, I think I may switch back to 35" tires! I have gotten used to it and I have never been in any off-road situation that required me to have 37" tires. I am thinking 35's would be better. Since I either drive it empty or tow a trailer and a tractor, the increased rpm and lower gear ratio from a smaller tire would work well for towing. I find myself running around in 5th a lot of the time so I don't lug it too badly, so I am rather certain it would benefit from a slightly smaller tire along with a bit more lowering.

Just driving it around, especially slow and in parking lots is not a joy. The turning radius is not good, and I may revisit that too.

The rock chips have gotten pretty numerous, so it is time to sand all that down and recoat with urethane bed liner.

The interior has several problems that I am addressing. First, the vinyl on the side of the driver's seat bottom has cracked and will eventually split. Today I ordered a completely new leather interior from Leather Seats.com. I also picked up a new foam driver's seat bottom piece that is a bit denser than the factory. Finally, I purchased a center console lid cover in Mitt Brown leather.

I selected a two-tone color pallet. The body of the seat and back will remain black. But the seating surfaces will be done in a perforated mitt brown series of panels. The headrest and backs will remain brown. The back seats will be sewn in the same pattern and finished with Mitt-brown double stitching.

Those are on order and on a 4-week lead time.

When all that comes out, I will remove the interior and address all issues including shampooing the carpet. I am debating installing dynomat sound deadener...

The dash has cracked in several places, so I purchased another one to cover everything.

The driver's door armrest has failed so I picked up a new GM panel to fix that.

I am just going to go bumper to bumper and fix everything. I'll detail and paint to get it ready for the next 11 years. With a couple of generations now having come and gone, my truck is turning into something of a relic, err, classic. I actually like driving it for that reason. It still gets as good/better mileage than any new one-ton, has more horsepower by at least a margin of + 50%, and a couple of hundred ft/lbs. over the closest contender, the Ford. It's paid for and in the tuck where we pay taxes on property, we own including our vehicles, I turn an annual $700 tax bill into a $250 one. So, it makes sense to continue to update this trusty ride.

You'll be very pleased with Leatherseats.com. I ordered all new foam & leather seats from them for my C6 a few years ago. Pricey, but you get what you pay for.

25
FWIW, several years ago, I used to run my LB7 on almost all waste mineral oil with no noticeable affects.

26
Bikes Motorcycles, S x S's, Tractors, and Mowers / Re: Kubota RTV X1100C
« on: January 31, 2022, 09:56:14 AM »
I sure wish I had this right now, (we) New England just got hit with 24+ inches of snow this past weekend.

28
Bikes Motorcycles, S x S's, Tractors, and Mowers / Kubota RTV X1100C
« on: January 27, 2022, 08:53:48 AM »
After owning my 2003 Polaris Ranger 6x6 for the past 9 years & dealing with failing obsolete electrical components, I decided to treat myself with something a little newer & nicer. I just ordered a 2022 Kubota RTV X1100C. The dealer said to expect a lead time of 5-6 months, which i'm ok with. The used market on these is ridiculous. 4 year old units are literally going for more than what i'm paying. I ordered it with the Boss 6'6" V plow & all the other extra bells & whistles. I will use it to plow my driveway & visit my neighbors. A really expensive toy, but i'm excited.

29
Donations / Re: Christmas 2021
« on: December 16, 2021, 10:35:36 AM »
 :likebutton:

30
Hide Site / Re: Hide Site/Bug Out Location Construction, Part 7
« on: November 03, 2021, 08:22:02 AM »
Next up, the new 3/4HP jet type shallow well water pump was installed

It is wired in hooked to a 30 amp double pole breaker. I may pull that back to a 20 amp...thinking

I wired it up 220VAC. It had an option for either 110 or 220

I ran out of crimp-type PEX rings, so I'll have to get some more and finish the install a bit later on

Does this pump have an internal expansion tank? If not, that pressure switch will be kicking on & off every 2 seconds.

31
Cooking equipment / Re: Thinking of buying this grill
« on: October 14, 2020, 08:36:55 AM »
Glad to hear Doc. That’s where a lot of that extra money goes. Service after the sale is worth something.

It certainly is. Although the $4k+ pricetag may be out of the range for some, you cannot put a price on peace of mind...
Sent from my iPhone using Tapatalk

32
Cooking equipment / Re: Thinking of buying this grill
« on: October 09, 2020, 08:37:19 AM »
Well, it's been 2+ years later & this is still the best grill I've ever owned. I use it almost daily in the warmer months & have zero complaints. I had an issue with one of the LED bulbs that light up the knobs & called them. they sent me a replacement free of charge. The new bulb was a shade brighter than the rest so I called them back & they sent me all new bulbs free of charge. They never once asked me where I purchased the grill or how old it was. I'm very happy.

33
This is by far the most used chainsaw I have:
https://www.echo-usa.com/Products/Chain-Saws/CS-2511T

34
Donations / Re: Christmas 2019
« on: December 11, 2019, 07:50:41 AM »
OK, we have our first $100 donation...Thank you sir!

 :smiley:

35
Build Threads / Re: Topic: 2002 Suburban 2500 build thread, Part 4
« on: October 28, 2019, 08:01:03 AM »
That is a beauty

I would be interested if I didn't already have mine

I am having a difficult time not picking up one of these:

Mine just turned 60K & aside from a few issues I had early on, I still love it.

36
I have the '03 500 version of this in 6X6 & it has plenty of power for me. I use it to plow my driveway.

37
Build Threads / Re: 2002 Suburban 2500 build thread, Part 3
« on: March 27, 2019, 07:25:57 AM »
The front will need a mount which I will fab up and mount at each corner. Without the mount the rack is pretty stout, but it should be secured properly to remove any doubt

The front of that roof rack would be a perfect spot for a light bar...

38
Alternative Energy / Re: Wood Fired Boiler Install
« on: October 17, 2018, 07:19:54 AM »
I may be a day late & a dollar short, but if you ever run anything on the exterior of the house, consider this stuff:
https://www.rectorseal.com/fortress-standard-professional-grade-duct-fittings-moderate-price-point/

39
Alternative Energy / Re: Wood Fired Boiler Install
« on: September 27, 2018, 03:17:52 PM »
I'm positive. the label on your pex clearly states "for use with potable water only"

40
Alternative Energy / Re: Wood Fired Boiler Install
« on: September 27, 2018, 07:09:54 AM »
Also, in a closed loop system, you need to provide a means of expansion. How will you be doing that? You are going to need a monster pump to overcome the pressure loss going through that heat exchanger & the 2 hydro coils. If you insist on piping the system this way, I would install the H/E feeding the water heater last. Incoming cold water is going to rob all the BTU's from the hydronic side of that heat exchanger leaving piss warm water coming out. Granted you really only need 140deg for hydro air, you're cutting it close putting that heat exchanger in between the coils. I'll be completely honest. If I were to go into a house that had a piping  system you're about to install, I'd cringe & rip it all out. You will have no control with just 1 loop. Please PM me & I can give you my number & all the advice you want. I'd hate to see you spend all this money & not be happy with the results. Or, you can completely disregard everything I've said & carry on.

41
Alternative Energy / Re: Wood Fired Boiler Install
« on: September 27, 2018, 06:41:31 AM »
And here is the 1" PEX I picked up at Home Depot. It retails for $74 for 100 feet. With my discount I am paying $67 for the roll.

I think I will end up needing three rolls total

Don, sorry to be the bearer of bad news. That pex is for potable water use only, and not to be used in a hydronic system. You need Pex with an "oxygen barrier" for that application. Using the Pex you purchased will promote bacterial  growth, turn the water foul & murky over short time.

42
Alternative Energy / Re: Wood Fired Boiler Install
« on: September 26, 2018, 08:02:18 AM »
OK plumbers render an opinion for me

Getting ready to start installing the various pieces of the wood boiler inside the house part of the system.

I will be using 1" PEX to transfer the hot water. PEX is rated to 200F and the water it will transport will start its journey at 180F then as heat is siphoned off will end somewhere around 110-120F I would imagine.

From everything I have read the regular PEX is fine for this application. The only warnings I see is to stay away from Chinese manufacture. Ploy PEX draws its strength from a cross linking of the poly molecules. This cross linking process occurs over a 12 hour process where the plastic is kept at (I think) 120F. From what I have read the Chinese will oftentimes just extrude the poly and package the tube up and ship it off for installation into Dave's new house.

So, I'll pick up some high quality (Expensive) US made PEX and begin with a 200 or 300 foot roll of that.

Specifically, I am seeking advice on the attachment method of the line to the fittings. I can buy fittings that the tube is pressed onto and grabs all by itself through barbed flanges. I can also use the standard PEX fittings and use a hose clamp, a specially designed PEX stainless clamp that one uses special pliers to install, or I could use the crush rings I have so often used in the past for the 1/2" and 3/4" applications.

Finally there are shark-bite fittings that one simply inserts the PEX line into a fitting containing an O-ring and teeth which simply capture the line and seal it with the rubber gasket.

My inclination is to use the stainless rings which are squeezed to proper tightness with the special pliers, but no decisions have been made. THe installation begins tomorrow!

Don
sorry for just responding. This is the sole brand of Pex I use. I just actually went to a 2 day course on their new products which is why I didn't respond sooner. I use nothing but Viega products. the tubing is made in Kansas I believe. They use a stainless ring that gets crimped on. I use their tubing & fittings.
https://www.viega.us/en/products/Spare-parts/Viega-FostaPEX-tubing-2805US.html

43
Alternative Energy / Re: Wood Fired Boiler Install
« on: September 20, 2018, 06:54:48 AM »
Don, my welder had one of these (a large one like yours) and he started with two separate runs. Granted he was heating a 40 x 60 insulated shop too however in the end as you don’t want your garage, shop or work space overly warm what he did was ran it to the house heat exchanger first then in return to wood burner he ran the water through the exchanger to the shop. It kept the shop comfortable. This way worked best for his situation, something to consider maybe.
That is exactly how I plan to route the lines

Circuit 1 goes from boiler to the 20 X 20 HE to the 20 plate hot water heater then to the garage heater. Tim tells me the 180 degree water will be down to around 130 when it reaches the garage air handler, plenty enough to keep that room toasty.

Circuit 2 will go to the smaller air handler 18 X 20 first, then on to the 100,000 BTU big garage (30 X 36 X 12) heater.

Luckily for me, there is a lot of experience out there that is readily available that I am reading.

If you need any assistance, ask away. I've been a licensed plumber for 20+ years

44
Alternative Energy / Re: Wood Fired Boiler Install
« on: September 19, 2018, 06:58:32 AM »
Did you ever look into a wood gasification unit? little to no ash to clean up & can be 2X more efficient, but can only take seasoned hardwood.

45
Cooking equipment / Re: Thinking of buying this grill
« on: June 12, 2018, 10:59:35 AM »
To the best of my knowledge, I've never seen a grill for sale commercially constructed with 316L. Most cheap stainless grills are type 430.

46
Cooking equipment / Re: Thinking of buying this grill
« on: June 12, 2018, 09:48:51 AM »
Nate, I bought an island grill, sink, frig set from Lowes, the ones with granite tops. They were pretty H/D, and not very cheap(but China) and the cast iron burners rusted out within 3 years of occasional use. They were pretty thick also. The large diameter 304 grates also rusted (turns out they were not solid stainless) Now they don't sell that model anymore. urrr

Most(if not all) grills from big box stores are a cheap grade of stainless. Although mine initially came with a hefty price tag, every metal part on it is 304.

47
Cooking equipment / Re: Thinking of buying this grill
« on: June 11, 2018, 11:05:31 AM »
After going on vacation & then travelling for work, I finally got a chance to use it. You (I) really don't know how bad your old grill is until you use a higher end unit. Flare-ups are nearly impossible with it which is huge for me. I've cooked marinaded tips & pub burgers on it so far. Everything came out juicy & cooked perfectly. The sear is incredible. Even though the burners are only 8K btu each, I can get this grill to 900deg in 10 minutes. It's true when they claim a hotter temp while using way less fuel. This is by far the best grill I've owned.

48
Cooking equipment / Re: Thinking of buying this grill
« on: May 21, 2018, 07:35:46 AM »
Well, my ancestry got the best of me & I bought it. He was asking $2,400 but I ended up paying $1,800 for it. It was(barely) used as a demo unit & all the accessories that come with it were still wrapped up. Regarding the burners, even though the are tubular, they are almost twice as thick as a conventional tube one. Plus, I really like the fact that there will be no flare-ups with their design. All in all, I'm happy & believe it will last me a very long time.

49
Cooking equipment / Re: Thinking of buying this grill
« on: May 17, 2018, 01:34:58 PM »
I wouldn’t pay $240 for it!  Then again the original purchase was probably descended from an inbred loyalist line who traces their heritage back to Benidict Arnold ........ Boston ..........

Although I live in the Boston area, my parents are Portuguese so I should be good with the "inbred" aspect... :embarrassed:

Not a reference to you......the SELLER.......

I know.

50
Cooking equipment / Re: Thinking of buying this grill
« on: May 17, 2018, 12:56:45 PM »
I wouldn’t pay $240 for it!  Then again the original purchase was probably descended from an inbred loyalist line who traces their heritage back to Benidict Arnold ........ Boston ..........

Although I live in the Boston area, my parents are Portuguese so I should be good with the "inbred" aspect... :embarrassed:

Pages: [1] 2
SimplePortal 2.3.6 © 2008-2014, SimplePortal