0 Members and 2 Guests are viewing this topic.
Hey Don, your shore power plug is 30amp, yeah? Shouldn’t you use a 10 gauge romex for that to be sized properly to the 30amp potential?You have the yellow stuff which is 12 gauge which is for 20amp max. Orange is 30 amp.
If the 30 amp supply goes to a distribution panel, and everything comes off the panel, and the plug- ins are 20 amp rated style, can't you just replace the wires from back of service plug to the panel to handle the 30 amps. The rest should be protected with 15 or 20 amp breakers. Don't know about the 12 volt side I don't do solar, and am only a diy not certified electrician.
Looking good Don. I still want to see the scale slip when it’s done. I bet its solid.Sent from my iPad using Tapatalk
Quote from: TexasRedNeck on February 07, 2020, 08:05:05 PMLooking good Don. I still want to see the scale slip when it’s done. I bet its solid.Sent from my iPad using TapatalkI want to see him shimmy it out the double doors of the wood shop...
Maybe use a time delay camera, snapping a shot every 20 seconds or so.
Quote from: TexasRedNeck on February 07, 2020, 08:05:05 PMLooking good Don. I still want to see the scale slip when it’s done. I bet its solid.Sent from my iPad using TapatalkI would bet its heavier than expected. I'm wondering if the axles are heavy enough. Sent from my SM-T727V using Tapatalk
You asst switching glasses or clothes?