This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - KensAuto
Pages: 1 ... 89 90 [91] 92 93 ... 151
4501
« on: November 17, 2016, 05:14:18 PM »
Need more on that story^^^...the demise of the other 2.
4502
« on: November 17, 2016, 11:05:27 AM »
Awesome. Just awesome!
Sent from my SM-G900V using Tapatalk
4503
« on: November 10, 2016, 10:11:11 PM »
Tell your pops that they actually make smaller heater hose clamps.....they come in all different sizes! Haha
Sorry, that's the only thing I could find that would fit my smart butt agenda. ;)
Sent from my SM-G900V using Tapatalk
4504
« on: November 08, 2016, 10:01:58 PM »
If we can get rid of CA then the electoral map takes on a whole new look. JR, time to relocate.
Sent from my iPad using Tapatalk
I like this post. 56 going to a 95% leftist state (sorry JR) just doesn't seem fair. ...oh wait, the system isn't fair to start with.
4505
« on: November 08, 2016, 08:50:00 AM »
Probably voltage. ...or should I say ..lack of.
Jumping one of them to your truck battery would confirm.
I read somewhere that some of those need 13 volts to work.
Sent from my SM-G900V using Tapatalk
4507
« on: November 06, 2016, 10:28:39 AM »
I'm sorry for your loss buddy.
Sent from my SM-G900V using Tapatalk
4508
« on: November 04, 2016, 04:25:53 PM »
Well, that makes it even cooler if you ask me.
4509
« on: November 04, 2016, 11:12:45 AM »
Anyone else having issues with seeing the pics?
4510
« on: November 04, 2016, 11:10:51 AM »
Nice axe!
Is that a standard leather cover, or did you have to make one?
4511
« on: November 03, 2016, 12:09:07 PM »
Dillon 650 ftw! The powder drop(s) is/are pretty darn acurate as well.
Even a moke like myself does a good job with that machine.
4512
« on: October 31, 2016, 10:24:17 PM »
I can honestly say that I've never had to tell my girls to be on the lookout for a rogue polar bear, around these parts. Yikes
4513
« on: October 31, 2016, 10:22:50 AM »
Come on JR, this is supposed to be a serious thread. Don has to tow trailers, and I don't see a bumper hitch on that truck. :)
4514
« on: October 29, 2016, 10:56:57 AM »
Looks good!
Sent from my SM-G900V using Tapatalk
4515
« on: October 27, 2016, 11:41:31 PM »
Hold up, did I just hear you mention Sq D and work (meaning functioning as a driver going down a road) in the same paragraph?!?
Only after mentioning the purchase of 2 other (new) trucks. ;P
4516
« on: October 26, 2016, 09:00:37 PM »
Tate knows.
If you've seen some of the stuff that is shown there, you wouldn't think twice about trying...all it takes is an "In".
...or a bag of money.
For example, there's a shop here in my little city, which has a less than stellar rep, and he's building a 70ish chevy truck, and it's sponsored by PPG paints. That's his "IN". I haven't seen it myself, but I guarantee it's not half as nice as your 715. Guaranteed!
4517
« on: October 26, 2016, 02:36:41 PM »
No problem. I've heard a few stories of how the front diffs grenade, so I guess it's a good idea to keep it changed often.
I also overfill the trans on mine, especially after adding the turbo. I think yours is the same design...a one piece trans/rear diff. The fUll hole is the one the right side, and the fIll is in the back. I filled mine to the rear plug...almost doubling the capacity, and so far so good.
4518
« on: October 26, 2016, 10:36:56 AM »
I got a little more than 8oz in, a couple weeks ago, but I didn't let it drain as long as usual.
The reason I don't wanna take my bumper off is because there's a winch hooked to it. lol
4519
« on: October 25, 2016, 09:20:46 PM »
You can get to it, it just sucks doing it. I've done mine twice now, and cussed both times!
4520
« on: October 25, 2016, 02:19:11 PM »
I like that target idea as well, except I'd probably have the whole thing destroyed in just a few shots.
4521
« on: October 23, 2016, 08:04:56 PM »
I keep some goodies in those containers, and in the summer they get about *150, so trying to knock that down and at the same time give me a place to store engines, small forklift, etc. I already had the metal....leftover from a mini storage site.
Sent from my SM-G900V using Tapatalk
4522
« on: October 23, 2016, 03:29:19 PM »
I feel your pain brother. How you liking this year's "Fall"?....seems like summer's dragging on and on. Did some family oil changes today, and now some tin hanging.  Sent from my SM-G900V using Tapatalk
4523
« on: October 23, 2016, 10:34:51 AM »
According to the diagram, there should only be one red wire, A11.
The connectors should be labled, but you will have to use a magnifying glass to see the numbers and letters.
Sent from my SM-G900V using Tapatalk
4524
« on: October 22, 2016, 11:27:21 PM »
In for the carnage pics.
I know with out a doubt, if I was doing that job, something would go terribly wrong.
Sent from my SM-G900V using Tapatalk
4525
« on: October 21, 2016, 06:30:29 PM »
If they had just slopped it form the original spot to over the vent, then turned vs that big S setup it would have been fine.
I am guessing at the 12in, but better more than none. Think I am just under double though. 20ft (240in) / 12in = 20. So I have just under 1/4 per foot.
Is that some Cali math JR? 12/20= .6 inches per foot.
4526
« on: October 21, 2016, 09:57:36 AM »
or both ^^^
4527
« on: October 20, 2016, 08:32:56 PM »
Cool!
4528
« on: October 20, 2016, 05:47:10 PM »
Nice looking boots!
4529
« on: October 20, 2016, 05:45:58 PM »
..... We will settle this like men at that time if the country still exists.
You sayin' we're going to sit down and slam a few brewkies? (btw, I don't live in Snobsdale)
4530
« on: October 20, 2016, 03:31:13 PM »
I'm in!
4531
« on: October 20, 2016, 10:42:57 AM »
Lose the red thing on the top, and the green thing on the bottom, and it'll be GTG!
4532
« on: October 20, 2016, 10:32:28 AM »
If it only has 9.4, then trace THAT problem out. First check it again by running the ground (from the voltmeter) to the battery, to make sure there isn't an issue with the dash/column being grounded.
4533
« on: October 19, 2016, 04:59:18 PM »
That's how I felt Wilbur. I always felt that there were some over the top republicans spouting all of these crazy conspiricy theories, and maybe some were true to a degree. Now, I don't know how to feel. Just crazy stuff going on, above my pay grade.
4534
« on: October 19, 2016, 12:32:43 PM »
4537
« on: October 19, 2016, 09:14:23 AM »
I thought you were rebuilding the rear end when I saw this....for that, I would have very little to offer...but....
I've reused fine thread bolts multiple times with no issue. As far as alignment, if it ever gets cattywompus again, just take a big hammer under there and smack them till they're straight, make sure the u-bolts are tight, and keep on truckin.
4538
« on: October 18, 2016, 02:59:12 PM »
Unlike her emails, our relationship is open. :)
4539
« on: October 18, 2016, 10:29:41 AM »
Good exposure for sure. Are those 48s, or 54s?
4540
« on: October 18, 2016, 10:24:20 AM »
I sure like that service truck. Especially the boom on the back.
4541
« on: October 17, 2016, 10:34:58 AM »
You won't be disappointed with Timney. (They are also a Christian company)
4542
« on: October 16, 2016, 10:16:30 PM »
I think his wife should've taken his credit card away if he's going to be laying around for awhile !
4543
« on: October 15, 2016, 01:58:57 PM »
Praying for you Don...hope they heal quickly, because I'm sure all you can think about is the famous quote from game of thrones; "winter is coming"
And I'm with the other guys, we need the video. Only for training purposes.
4544
« on: October 14, 2016, 03:34:05 PM »
Looks good JR.
4545
« on: October 14, 2016, 10:24:18 AM »
Had a guy tell me that the codes vary between areas. I guess in some places, you have to keep the neutral and ground bars seperate, in others you can drive that screw in to join them. I know it's another thing I'm not good at (household electrical)
4546
« on: October 13, 2016, 10:05:59 PM »
Man all of it looks great. Good job boss.
Shawn, he dug that trench by hand....didn't even have a shovel!!
4547
« on: October 13, 2016, 06:06:39 PM »
You watch treehouse masters? That guy makes some neat rigging/brackets.
Hey JR, buddy, you better be careful up there!
4548
« on: October 13, 2016, 02:36:32 PM »
Nice! Love dem Rockwells
4549
« on: October 13, 2016, 10:31:57 AM »
Spot on!
4550
« on: October 13, 2016, 10:27:34 AM »
Plates with bolts in them? :)
Pages: 1 ... 89 90 [91] 92 93 ... 151
|
Show Posts
