Hello Guest

Author Topic: 8 Lug hubs for a Dana 60??  (Read 902 times)

0 Members and 1 Guest are viewing this topic.

Offline JR

  • Global Moderator
  • ****
  • Posts: 13537
    • View Profile
8 Lug hubs for a Dana 60??
« on: January 20, 2015, 01:09:46 AM »
OK, so I have a dana 60 with the external LARGE hubs with Seletro hubs. This is called an external hub from my research. Flares out from the WMS to the locking hubs.

I also have a GM corp 10 bolt with the large 8 lug hubs and wondering if they will swap over to the dana 60? EI; Are they like the GM Dana 60 with the 8x6.5 hub or is the 10 bolt smaller?
Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34018
    • View Profile
Re: 8 Lug hubs for a Dana 60??
« Reply #1 on: January 20, 2015, 09:08:34 AM »
^^^^ Tate??
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline EL TATE

  • Moderator
  • ***
  • Posts: 3180
    • View Profile
Re: 8 Lug hubs for a Dana 60??
« Reply #2 on: January 20, 2015, 10:20:54 AM »
That's a negative. The 8.5 lrg hub is technically the same as the D44. spindles are too small. externally the hubs are similar but that's where it stops. what you can do is swap a GM Dana 60 8 lug hub from 77-91, or any Dodge D60 hub from 75-93 with internal type locking hubs. (flanged hubs won't swap). You can, however, sell those Selectros online and make a few hundred bucks. I get calls regularly for replacement parts for those and they've been off the market for years.
Husband, Father, Gear guy, Patriot.

 

SimplePortal 2.3.6 © 2008-2014, SimplePortal