This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - TexasRedNeck
Pages: 1 ... 153 154 [155] 156 157 ... 224
7701
« on: October 31, 2016, 10:41:14 PM »
Hold on Sam!! Global warming is coming to save you and kill the polar bear. Oh and it's been mid to upper 80s here. No ice on the lakes
Sent from my iPhone using Tapatalk
7702
« on: October 29, 2016, 09:14:22 PM »
started the day by removing the front tire from the riding lawn mower. Its had a super slow leak for a long time. cleaned it and dunked it in a large bucket of water. Found the leak and broke down the tire. Decided to go tube. Drove to town to get a tube and some fittings.
Installed my rapidair tubing in the shop, just a couple of drops for now.
Painted one of the doors an espressor brown. Now the trim looks like it needs to be painted a different color.
7703
« on: October 25, 2016, 11:58:02 PM »
Today I laid another 28 bags of cedar mulch. And ordered another set of Alpine component 6 1/2 speakers for the front doors on the LB7. That will allow me to get after the replacement of the regulators with the new AC Delco regulators, dynamat and new door pull (drivers side). Eventually I'll get a 5 channel amp and a new head unit (double din conversion) and a single 10 inch sub.
Sent from my iPhone using Tapatalk
7704
« on: October 24, 2016, 08:22:23 PM »
Discount has them out the door total for 1304 in my neck of the woods. If you go off road much, go with the nitto
Sent from my iPad using Tapatalk
7705
« on: October 23, 2016, 01:01:23 PM »
Today I realized that I needed more sunscreen yesterday. Sent from my iPhone using Tapatalk
7706
« on: October 23, 2016, 08:40:33 AM »
That is one super cool truck
Sent from my iPhone using Tapatalk
7707
« on: October 22, 2016, 06:44:35 PM »
Still doesn't account for voter turnout. Remember that Romney would have won had the same number of republicans turned out in 2012 that turned out in 2008. Trump set records for voter turnout. Hillarys campaign events have been dead and devoid of people. Our only hope is voter turnout. It's all about the SCOTUS.
Sent from my iPhone using Tapatalk
7708
« on: October 22, 2016, 04:45:38 PM »
Yep. That's my stockpile of choice.
Sent from my iPhone using Tapatalk
7709
« on: October 22, 2016, 03:46:16 PM »
Looking good Dave. That is a good job of prep on that frame
Sent from my iPhone using Tapatalk
7710
« on: October 22, 2016, 03:42:14 PM »
Sure is a funny looking trigger.....
Sent from my iPhone using Tapatalk
7711
« on: October 21, 2016, 11:01:51 PM »
Just finished watching Lone Survivor. Liked the book better ( esp since mine is autographed!).
I wish they'd have included the part where Marcus gave his bloody Texas flag patch to Bush
Sent from my iPhone using Tapatalk
7712
« on: October 21, 2016, 10:10:56 PM »
:-)
Sent from my iPhone using Tapatalk
7713
« on: October 21, 2016, 08:50:15 PM »
37x13.5x20 are more than $500 each. I sold my set with 60% on one pair and nearly 80% on the other for $950
Sent from my iPhone using Tapatalk
7714
« on: October 21, 2016, 08:31:30 PM »
I won't offend anyone by going further than to say I'm not catholic and i don't need any intercessor other than Christ. My point was the dems hate religion. Mock it even.
Sent from my iPhone using Tapatalk
7715
« on: October 21, 2016, 08:29:26 PM »
Truth be told I went down on a street bike at 22 wearing shorts, a wife beater, and no helmet. The flip flops were a slight exaggeration that is a throw back to my dad getting his foot in the spokes of my cousins dirt bike back in the day. Ate most of the meat of the top of his toes.
Sent from my iPhone using Tapatalk
7716
« on: October 21, 2016, 08:26:43 PM »
Yeah. Idaho is on my list. Wife is thinking S America
Sent from my iPhone using Tapatalk
7717
« on: October 21, 2016, 08:25:24 PM »
I bought a sign for Don Sent from my iPhone using Tapatalk
7718
« on: October 21, 2016, 08:00:01 AM »
That piece is either really well written fiction or a scary glimpse.
Sent from my iPhone using Tapatalk
7719
« on: October 21, 2016, 07:53:38 AM »
The u bolts were a bust today. I couldn't break them loose. So I lubed again and went about peeping the spindles for paint and deciding if I should replace the wheel bearings in the front hub assembly
Sent from my iPhone using Tapatalk
Just don't use an impact close to the ground on those nuts and then leave your finger behind the back of the gun when you hit reverse.... I've heard of someone (cough) getting their hand pinned to the shop floor by the impact as it backed the nut off and being unable to reach the reverse button since it was on the back of the gun... jus sayin Sent from my iPhone using Tapatalk
7720
« on: October 21, 2016, 07:46:32 AM »
DDS thanks for the info. Think I am good at 12in drop in 20 ft.
It wasn't all that bad being lit up well and having the tyvek suit on. Did find 1 rotted out rat (used to have a problem with em, now have cats)
Jr thats 4x the recommended slope. DDS/plumber (wth???) is right. Waste has to float on/with water to make it to the sewer. Make sure and use plenty of water Sent from my iPhone using Tapatalk
7721
« on: October 21, 2016, 07:42:40 AM »
Flip flops , wife beater, camo shorts, no helmet. What could go wrong ?
Sent from my iPhone using Tapatalk
7722
« on: October 21, 2016, 07:38:34 AM »
No emblems. Just me but I hate emblems. Stealth mode
Sent from my iPhone using Tapatalk
7724
« on: October 21, 2016, 07:27:38 AM »
Toast the bun to help it stand up to the meat. Keep tomato. I'm with Bobby on fried egg but add the grilled jalapeƱo suggested by Done.
Step two. Take a tray of them to the local mosque.
Sent from my iPhone using Tapatalk
7725
« on: October 21, 2016, 07:24:16 AM »
Don I'd like to hear more. I was thinking CONUS because of firearms but I have friends in Mexico living well. I'm assuming your SF buds have a stash or access just in case?
Sent from my iPhone using Tapatalk
7726
« on: October 20, 2016, 08:59:39 AM »
The better question is " where will the best place to move be?
Sent from my iPhone using Tapatalk
7727
« on: October 19, 2016, 07:31:50 AM »
do one side at a time or getting the axle back in the right position is a pain without a helper. Get new U bolts. I've always heard don't reuse them. Torque is 120ft/lb IIRC. Go in a criss cross pattern a little at a time.
There are teflon pads to keep the noise down and I believe the spring back has a retaining clamp. if a leaf is rotating out of line, then you need something to retain it. The center bolt keeps them on axis but does nothing to keep them from rotating. I think there are pics in the bus rebuild thread
7728
« on: October 19, 2016, 07:24:31 AM »
breakfast of champions!
7729
« on: October 17, 2016, 11:00:03 PM »
Hope you have some medical training. Don needs help.
Sent from my iPhone using Tapatalk
7730
« on: October 17, 2016, 10:58:58 PM »
BFH on the tbars to get them out of the rear keys. Support the front so that they aren't binding up.
Sent from my iPhone using Tapatalk
7731
« on: October 17, 2016, 10:56:25 PM »
Congrats Tate. Getting good exposure.
Sent from my iPhone using Tapatalk
7732
« on: October 16, 2016, 08:57:37 PM »
I use opti lube summer blend. On a mechanical pump old transmission fluid seems to get a nod.
Sent from my iPhone using Tapatalk
7733
« on: October 16, 2016, 08:44:04 PM »
Pulled up all the rest of the bell peppers, jalapeƱos and habeneros today. Tilled in some more mushroom compost, blood and bone meal. Planted kale carrots beets lettuce mustard greens Oh and these came in the mail today. Sent from my iPhone using Tapatalk
7734
« on: October 16, 2016, 08:28:06 PM »
40 gallons. Got it for free off an oil field truck.
2:48 to drink it all up Sent from my iPhone using Tapatalk
7735
« on: October 16, 2016, 08:25:37 AM »
That would be news to me Shawn. My mains at both houses only have one. Might depend on soil type?
7736
« on: October 15, 2016, 10:16:34 PM »
As I recall, yes. Each sub panel should have its own ground rod
Sent from my iPhone using Tapatalk
7737
« on: October 15, 2016, 08:56:17 PM »
NEC says that when you run a sub panel you separate the neutral and ground and you should have a local ground with an 8ft copper coated rod driven into the ground and connected to the grounding buss in the panel.
Sent from my iPhone using Tapatalk
7738
« on: October 15, 2016, 08:53:02 PM »
So. Prepped and painted my aux tank today. POR15. Also watching it idle going on 30 minutes at the moment as the GM injector cleaning does it's thing. Sent from my iPhone using Tapatalk
7739
« on: October 15, 2016, 02:44:10 PM »
WE.....MUST......HAVE......VIDEO.......
I just hear this Foxworthy quote in my head....."hey watch this!"
7740
« on: October 13, 2016, 10:57:33 PM »
Maybe I'll fit in at the new one...... :-0
7741
« on: October 13, 2016, 10:27:20 PM »
7742
« on: October 13, 2016, 10:24:45 PM »
Tate, I'm so destructive, I can break a bowling ball so saying I can't over torque something.....well, I've yet to find something I can't break. Of course at my age now I might separate a rib in the process.....
7743
« on: October 13, 2016, 10:20:58 PM »
still waiting on mine
7744
« on: October 13, 2016, 10:15:09 PM »
7745
« on: October 12, 2016, 10:37:46 PM »
So Tate is there a manual available that gives all the proceedures and specs on the AAM?
Wait, I bought all five volumes of the GM shop manuals for the 2001 back in 2001. I'll be the drivetrain book will have the pics and specs and proceedures...I'll have to look at them this weekend.
7746
« on: October 12, 2016, 10:31:22 PM »
I'm learning and would like to see some real world experience
Sent from my iPad using Tapatalk
7747
« on: October 12, 2016, 10:21:14 PM »
Yep. Dodging parking tickets would be the least of their worries.
Sent from my iPad using Tapatalk
7748
« on: October 12, 2016, 10:16:55 PM »
So "hammer" equals counter measures. Makes more sense now. Thanks Nate
Sent from my iPad using Tapatalk
7749
« on: October 11, 2016, 07:24:00 PM »
my heart hurts
7750
« on: October 11, 2016, 12:04:01 AM »
Good news is that Wall Street likes her so I still have a couple of years to unload this house and get lean
Sent from my iPhone using Tapatalk
Pages: 1 ... 153 154 [155] 156 157 ... 224
|