0 Members and 1 Guest are viewing this topic.
Pinedale is a pretty area, I recall driving thru there on way to Jackson hole....
Quote from: JR on January 08, 2019, 10:52:27 AMSounds like a nice drive, hitting a few parks too?Nebraska, doesn't some OLD guy live out there? he just wants some of the good home cookin from me.....
Sounds like a nice drive, hitting a few parks too?Nebraska, doesn't some OLD guy live out there?
I say........PARTY at GLO
Playing with my EFI now. Can't get several tunes I like much less stand alone V2 use.
I had to pull the rad, condenser and cut the rad support open on spartan
Quote from: OldKooT on January 08, 2019, 12:29:16 PMI say........PARTY at GLO Sounds good, I'll try and figure about when i should be in that AO and you boneheads can back plan...Or just stand fast and I'll put the miles on the burb to find ya!
I won't beat around the bush, your pan will leak now, but at least change the o-ring on that tube! Maybe a couple more exclamations for affect.......!!!!!!.....Sorry, don't know about the tensioner...I thought the last ones I did (or paid the kid to do) had them. There's also a tsb on those iirc. I'll see if I can find it.Scratch that on the TSB, but I did see where a company makes a tensioner that fits the older blocks, if your concerned about it. I assume you're changing the set? Oh wait, you're even reusing the water pump . :sarcastic&firedI think they started using them because of noise. To be honest, I've never seen one jump teeth, or make noise. ..but if I had JR's money, I would replace the gear and chain. Do it right the first time!
Don, that fire extinguisher is a bit or lots too small to be effective by the time you get to it.
Quote from: Bob/OlallaWa on January 08, 2019, 09:30:07 PMDon, that fire extinguisher is a bit or lots too small to be effective by the time you get to it.Ah man!
Suppose if you think about it....the engines is almost out now anyway true? Cam change,degree the cam/proper oil pan gasket replacement, and maybe a look see at the bearings.....you said you were going to put a converter in it anyway....its a LS you can bet it needs new rods. Just thinking out loud here.
Quote from: OldKooT on January 09, 2019, 11:22:48 AMSuppose if you think about it....the engines is almost out now anyway true? Cam change,degree the cam/proper oil pan gasket replacement, and maybe a look see at the bearings.....you said you were going to put a converter in it anyway....its a LS you can bet it needs new rods. Just thinking out loud here. You know Don he is right. What 12 bolts and its out? Torque convert which was on the table anyway. No pan leak, easier assembly,,,,,,,,,,
Where is my popcorn emoji....Mission creep has begun....Sent from my iPad using Tapatalk
On another note....don't you need a new push rod now Don?