REAL MAN TRUCKWORKS & SURVIVAL
VEHICLES, CAMPERS, and BOATS => Everything Trailer, Camper, or RV related => Topic started by: Bob Smith on December 06, 2022, 10:36:41 PM
-
When I bought my tractor a couple years ago, I also bought a pallet fork attachment. This past week I bought a hitch receiver for the pallet forks to make moving pull trailers a bit easier. Should make getting the travel trailer in the garage much easier.
-
Interesting concept, I’ve got two options in mind. First blowtorch a hole in the end of a single fork which is what I’ve done menu times. Or the other is a buy a quick attach plate and add a hitch receiver to the front of it.
-
Our shop lift has a hole in the fork, at the cabinet shop I built a mount for one fork using the existing hole as attachment.
I’ll see if I can get a photo, I currently don’t have one
Sent from my iPhone using Tapatalk
-
Because of the 2,200 lb weight rating of the forks and the weight on my travel trailer hitch I needed both forks in the game. The pallet fork attachment is not nearly as heavy duty as the fork lifts I have been around.
-
Interesting concept, I’ve got two options in mind. First blowtorch a hole in the end of a single fork which is what I’ve done menu times. Or the other is a buy a quick attach plate and add a hitch receiver to the front of it.
I thought about buying a plate and having a receiver attached to it but the welder/fab guy thought he could build something that fit the forks I have and work fine. He wasn’t interested in putting a mounting hole in these forks either.
-
Pretty slick set up Bob
Sent from my iPad using Tapatalk
-
Interesting concept, I’ve got two options in mind. First blowtorch a hole in the end of a single fork which is what I’ve done menu times. Or the other is a buy a quick attach plate and add a hitch receiver to the front of it.
I thought about buying a plate and having a receiver attached to it but the welder/fab guy thought he could build something that fit the forks I have and work fine. He wasn’t interested in putting a mounting hole in these forks either.
Copy :likebutton:
-
The forks adapter worked good. Room enough to open slides too.
-
Interesting concept, I’ve got two options in mind. First blowtorch a hole in the end of a single fork which is what I’ve done menu times. Or the other is a buy a quick attach plate and add a hitch receiver to the front of it.
Door number 2