Hello Guest

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cudakidd53

Pages: [1] 2 3 ... 47
1
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: Today at 03:03:45 PM »
A suppressor is a suppressor, not an option in Comiland. Pellet gun is suppressed, some loophole as in not a firearm.

Just surprised behind the noggin didn't just end it.

Try the eye next time... :beercheers:

2
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: Today at 11:36:36 AM »
:like

JR, a suppressed 22 is quieter and more effective.


Sent from my iPhone using Tapatalk

but Charles, that would mean a law enforcement occifer sworn to uphold the law in the commie state of retardedness would be breaking the law........:stickpoke

Shooting through an empty milk jug works pretty good too!  Those are still legal aren?t they, or do you only get glass now in Libtardifornia?

3
it should just about be done by now?!

We like our bacon crispy  :wink:

It went well, busy day around here. Family coming in starting tomorrow.

Think doorbell scene from National Lampoons Christmas Vacation?

4
Cooking equipment / Re: So we bought s smoker....
« on: December 17, 2017, 12:25:10 PM »
Kay bought you a burn barrel.........  :grin:

5
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: December 16, 2017, 09:30:33 PM »
Really looking nice there Don! The Mrs. should really like it too  :likebutton:

6
Faith Discussion / Re: Prayer Request thread
« on: December 16, 2017, 04:17:18 PM »
Prayers sent for all- Gods Peace and Blessings!

7
CIEMR / Re: So I ran across this.......
« on: December 16, 2017, 10:31:18 AM »
That site should have "Renolds" sponsor them, for the amount of Aluminum foil that crowd must go through......

8
Firearms / Re: new remington 870 mag fed shotgun
« on: December 16, 2017, 10:24:35 AM »
Just because someone spent a bunch of money on something, doesn't mean that something is worth "X"......look at Hillary for President for a great comparison for that axiom!

9
General Vehicle Related Discussion / Re: 2010 Chevrolet Traverse SOS
« on: December 16, 2017, 10:21:02 AM »
Dave, we're going to have to start calling you "Willow" tree - you through a lot of shade, and leave junk all over people's yards! LOL!  :beercheers:

10
CIEMR / Re: So I ran across this.......
« on: December 16, 2017, 10:14:49 AM »
Well, I took away from that post and comments, that EVERYONE with a computer is eligible to become a raving lunatic when they're typing in the privacy of their own "safe space" and don't have their true identity posted for all to see........ :facepalm:

11
Donations / Re: Christmas 2017
« on: December 16, 2017, 10:02:16 AM »
Good to hear!

That Shawn & Ken thing is "putty in God's hands" ........SILLY PUTTY!

12
CIEMR / Re: Well said Mr. President!
« on: December 15, 2017, 08:39:20 PM »
Yes sir!  Former carpet kisser really had a way of pissin off those who love this country!

13
Firearms / Re: new remington 870 mag fed shotgun
« on: December 15, 2017, 11:23:17 AM »
Still recovering from my shoulder injury....so at some point when it stops being sore after a few mags of anything above a .22 I intend to set up a Glock as you described. If it turns out I don't like it long term, I am sure one of my boys will buy it LoL

ATM I am screwing together a 24" barrel AR for sniping prairie dogs at about 300-400 yards. This must have been a good breeding year for them, time to trim the population back a bit. They are making a mess out of the river banks on one of our properties.

I scored a new Anderson upper complete with a NB BCG for $325 (he finally caved in Nate LoL) So assuming I can find some inexpensive glass that gets the job done, and is befitting a truck gun type of life (read it will get banged around a little) I should be under my monthly gun budget yet LoL

Today's project between "work moments" is to find where I hid a lower I had already assembled with a nice trigger and A1 stock...assuming I can find that, I should be able to go run the barrel in this weekend. Then if it all works as planned I can disassemble and have it coated this next week and call it done tell I find the glass I want. Best laid plans and all that.....Lol

I love my Vortex Norm!

14
Donations / Re: Christmas 2017
« on: December 14, 2017, 02:30:45 PM »
Alrighty, there men, bumping this again to see if we can push this puppy over the top of $1000 for the Christmas giving season......I mean, really, SquareD HAS been pushed outta the garage.  MIRACLES CAN HAPPEN!

15
Firearms / Re: Black Ace Tactical DT Shotgun
« on: December 14, 2017, 02:17:53 PM »
Only thing I don't like about it, is that it's biased towards right handed responders - I'd like a more ambidextrous set-up more for a squad weapon such as your Church security team.  Cool set-up though!

16
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: December 14, 2017, 02:11:21 PM »
Best of luck Sam, my the Good Lord watch over you and those you serve!

17
Classifieds / Re: American Made Jeans for Christmas 2017 donation
« on: December 12, 2017, 08:59:11 PM »
We all eat like Nate cooks = waistline bigger than inseam!  :rolleyes:

18
It all comes down to what you want to spend and if you plan on keeping your current tool boxes.  That pricey Husky 72 is nicer looking and i see what you mean about the caster differences between the other Husky.  I like the pricey one as it doesn't have the chrome lips on the drawers and they appear to be powder coated.  If you have all your small hand tools to put into the shallow flat drawers it makes sense.  If you don't need all those shallow flat drawers, it might be a waste.  The Milwaukee with the peg board has no shallow flat drawers for tools - must be the reason for the peg board.  72" isn't that handy to move around when full, so it depends on how you will use it ultimately. 

Good luck - fun problem to solve!  I'd go and kick tires on each model and decide that way if it were me.

19
Build Threads / Re: SquareD Part 8, This thing ever going to get finished?
« on: December 09, 2017, 09:14:37 PM »
Pretty big font there Mike, trying to emphasize something?

Just 32 years of increasing stupidity from supposedly educated people!

20
Build Threads / Re: SquareD Part 8, This thing ever going to get finished?
« on: December 09, 2017, 10:17:13 AM »
Who?d a thunk that to get this beast running efficiently, you?d have to retard the timing?  Like this project needs to take longer!  :laugh:
Why not? It seems to be a proven method of our educational system!












Gotcha!

thats why I cannot wait to retire!

21
Build Threads / Re: Let's call her Tina
« on: December 09, 2017, 10:14:56 AM »
Any time you can make money on a vehicle, take it!  Glad you are alive and well and life is blessing you and yours!

22
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: December 08, 2017, 09:48:10 PM »
M1A 6.5 what do you all think for $1500 bucks not a bad deal


Sent from my iPhone using Tapatalk

Depends on who makes it and quality of the components.  Springfield Armory has one just out that would get my attention if I was shopping.

23
Build Threads / Re: SquareD Part 8, This thing ever going to get finished?
« on: December 08, 2017, 09:41:51 PM »
Who?d a thunk that to get this beast running efficiently, you?d have to retard the timing?  Like this project needs to take longer!  :laugh:

24
Build Threads / Re: SquareD Part 8, This thing ever going to get finished?
« on: December 08, 2017, 02:12:22 PM »
Once it?s running under its own power, Don will need to drive to each of our homes to showcase this triumph of biblical proportions.....ok, at least a biblical proportion of TIME!  Norm and Nate will then involve Don in the homemade smoker version of the ?great candy bar fire?!

25
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: December 08, 2017, 02:03:30 PM »
I?d worry about poor unsuspecting musloids who might get covered by charred bacon Fall-out!  That?s a mushroom cloud that would really have mushrooms in it!

26
CIEMR / Re: Going around: The Angry Man
« on: December 08, 2017, 01:57:32 PM »
I see these challenges as opportunities to dig deeper into our love, and set a higher bar for our loved ones. When I get frustrated with the world I plant some flowers  :laugh:
Hippie!

WHAT? Norm has ?Mandles??

27
Share Your Recipe / Re: whats for dinner tonight
« on: December 06, 2017, 10:26:15 PM »
what are you goin soft on us Nate?  Salad. DRESSING ????  SMH

Fixed it Charles, not much lettuce involved!

28
Faith Discussion / Re: Bible study fellowship
« on: December 06, 2017, 11:07:46 AM »
Sounds more like Jefferson......Washington the man is nothing like Washington the city!

29
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: December 05, 2017, 02:55:20 PM »
I?d love to run my AR10 from the air on hogs!  Don, if we all pitched in would you fly the bird?

30
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: December 04, 2017, 03:11:50 PM »
Just a 1-2 foot section angled down from the high spot over hanging over the camper with about a 1-2 inch gap to keep it off the rubber Rv roof allowing air to flow over it.
And why the air gap?

Abrasion prevention?

exactly, with the two sitting independent and free of each other, the rocking might wear into the roof of the trailer.  Ever been in one when it's really blowing?  In 2012 during the hurricane that hit the east coast so bad, I was in Michigan killing a day due to storms inside mine.  All 4 corners leveled, wheels chocked, and locked and the thing was rocking 2+ inches side to side!  On the outside, it must of looked like Jannett Reno and Hildabeast were going at it inside!  If you wanted, you could put some roofing starter strip or valley seal to bridge that gap without causing any potential damage.

31
Construction and Building / Re: Upstairs Add On started
« on: December 04, 2017, 02:40:23 PM »
Almost got the roof fully shingled. Worked until it was dark and still had 3 rows and the ridge.

It is windy, no leaf cleanup today!  :grin:

WRONG - get out there with a leaf blower and help them into your neighbors yard!

32
Construction and Building / Re: The Oracle...Jared's Corner
« on: December 04, 2017, 02:38:13 PM »
Frickin' NCO's

Such despicable language from someone who belongs to a group of people who wish to be considered Officers and Gentlemen. If I hadn't some decency I would have had to respond in kind.  :cool:

That?s correct Bobby; such conduct doesn?t ?Warrant? a response!  :grin:

33
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: December 04, 2017, 02:35:27 PM »
Yeah I might need a break




Sent from my iPhone using Tapatalk

Calc III?
Calc 2 intro

The idea is to find the area of one washer ( the basic idea is washer) and it follows the line F(X) with regards to g(x) and the 3 dimensional shape rotating around  the X axis.
Thus finding the volume the washer takes up.  Than add the trig stuff in and who knows what else you can do.  Thanks sir Isaac Newton


Sent from my iPhone using Tapatalk

Art guy solution: toss washer into known quantity of water and measure the displacement!  All that chicken scratch makes my head hurt!

34
CIEMR / Re: THAAD on West Coast
« on: December 04, 2017, 02:31:26 PM »
zero hedge is so behind the times...................smh

shawn, please don't think for 1 second that we have not had this covered for the last 20+ years.
These are mobile systems.

News flash: I heard it said that we can shoot these things withoug first getting congressional or Jerry Brown's approval, and even without first having to do an environmental impact statement.

I'd love to be in charge...Know where I'd install one?

Near the dorms, Berkeley University...

But that's just me

You?d just be giving them what they want - ?Safe Space? how can they disagree with that?!

35
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: December 04, 2017, 12:03:59 PM »
Just a 1-2 foot section angled down from the high spot over hanging over the camper with about a 1-2 inch gap to keep it off the rubber Rv roof allowing air to flow over it.

36
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: December 04, 2017, 06:45:52 AM »
Don, are you going to engineer an angled overhang for the trailer side of the roof?  Would help the wind go over instead of under the tin and create slight down force.

37
Build Threads / Re: LML Silverado Duramax C-Max build thread part 4
« on: December 02, 2017, 09:27:11 AM »
TRN - ?If momma ain?t happy, nobody?s happy?, a pool will is always a great alternative source of water for SHTF situations too; I?m sure we?ll see you ?cooling your heels? with a snort in your hand poolside too!

38
Parenting / Re: Raising twin boys
« on: December 02, 2017, 09:18:03 AM »
Bored dogs shred stuff.....don?t try nose n toes with them, they?ll just eat the wall!

39
Build Threads / Re: SquareD Part 8, This thing ever going to get finished?
« on: November 29, 2017, 08:51:41 PM »

I don't know, but to me these two look serious. After chatting with them for awhile, they believe the engine is not times properly. So job one will be to get the thing running.
Next will be to address the brake issue. Finally I'll likely get them to wire in the transmission or get it dialed in so that I should at the end of this have something ready for the alignment shop

I like how they're wearing surgical gloves so as to not cross contaminate the other vehicles there for treatment with whatever ailment might be lurking under the hood!

"the believe the engine is not timed properly"........where have we heard THAT before?  Certainly the DOT Choir sang that Christmas Carol about a year ago!   :popcorn:


I had to take  quick look at who posted this....Sounded more like a Shawn thing to me...

Great minds think alike!  Shawn's busy working on the Ken/Charles abuse network - I've picked up Don duty for the short term.  Speaking of Don - saw a remote control mini Chinook on sale at Amazon while picking up some Christmas toys for my youngest daughter and I to amuse ourselves with.

40
Build Threads / Re: LML Silverado Duramax C-Max build thread part 4
« on: November 29, 2017, 08:48:20 PM »
GET IT OUTTA THERE!  That dust could cause all kinds of mayhem and stuff might start malfunctioning, parts trucks will start a parade to your door again and that poor green warrior will feel like a kid who goes off to college just to come home and find someone new moved into his room!

41
Build Threads / Re: SquareD Part 8, This thing ever going to get finished?
« on: November 29, 2017, 08:40:37 PM »
I don't know, but to me these two look serious. After chatting with them for awhile, they believe the engine is not times properly. So job one will be to get the thing running.
Next will be to address the brake issue. Finally I'll likely get them to wire in the transmission or get it dialed in so that I should at the end of this have something ready for the alignment shop

I like how they're wearing surgical gloves so as to not cross contaminate the other vehicles there for treatment with whatever ailment might be lurking under the hood!

"the believe the engine is not timed properly"........where have we heard THAT before?  Certainly the DOT Choir sang that Christmas Carol about a year ago!   :popcorn:

42
Build Threads / Re: SquareD Part 8, This thing ever going to get finished?
« on: November 29, 2017, 08:31:10 PM »
Wow, what a cool truck!  You should do a complete oil change on that thing!..........oh, deja vu'  :facepalm:

43
Site Rules & Introductions / Re: New Guy from Oklahoma
« on: November 28, 2017, 11:49:26 AM »
Welcome Steve!  I work in the district where Ken?s GF Hildabeast went to HS - good news is that I?m up for parole in 18 months!

SquareD will move as soon as Don cuts holes in the floorboards and Fred Flinstons it down to the nearest mechanic!

Glad to have you here and thanks for your service!

44
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: November 28, 2017, 10:48:40 AM »
On the Delete front- it?s on the horizon for sure, but I?ll need to do it in such a way that I can reverse it should the need arise. Gotta find a shop around here that has a positive reputation for such work and go in a direction that will have long term support.

45
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: November 25, 2017, 12:06:16 PM »
Heading home from National Amateur Championship - great weather and time.  Dog showed his youth and I picked him up for chasing a bird AFTER his bracemate ripped the birds just as Hank pointed. Judges said he?s REALLY fast - he?s still there with trainer for the Open Championship starting tomorrow.

Damn Murphy snuck in my truck as I left today and I?m stuck in Springdale Arkansas waiting for DEF fluid heater to be replaced. Limp mode was 50 miles away!  Pulling trailer home in that condition is NOT an option so I gotta eat $715 and not even get lunch!

Attached is a photo atop the mountain I had Thanksgiving with dog friends at-

46
Wild Game / Re: Food on the hoof
« on: November 17, 2017, 02:51:39 PM »
Ken, you need a cactus suit - could use it for Halloween too!

47
Parenting / Re: When infants canít be soothed.
« on: November 17, 2017, 09:50:46 AM »
God bless you both, I remember those days and am I ever thankful that they passed.  My son still owes me 6+ weeks of being awake every night from the hours of 1am-3am; it was brutal for all of us, except my oldest daughter who slept through it all as a 2 yr. old!  They're 27 and 25 now-

48
Wild Game / Re: Cool story about Dardevl lures....
« on: November 17, 2017, 09:46:01 AM »
now that is cool. 

I have many memories of catching fish with the red and white daredevil spoon.

And they always seem to work, on multiple species!

49
Wild Game / Re: New bird locater
« on: November 17, 2017, 09:43:27 AM »
Thanks guys, he's actually pointing a covey of quail in that photo -  :smiley:

50
Wild Game / Re: New bird locater
« on: November 17, 2017, 07:18:09 AM »
So, here it is closing on Hank's 3rd birthday, and I thought I'd post a situation report.  He's qualified for and running in the ABC National All-Age Championships in Booneville, AK starting Monday.  I'm leaving with the camper heading there tonight after work for both of our "first time" at that National Championship.  12 hour drive I'll break into two chunks, stopping in Grovespring, MO. tonight and honking at Blaine as I pass through Springfield, MO tomorrow morning early.

He's been a lot of fun and points his birds with extreme style.  Following him on horseback is scary - he's fast and WAY more dog than I've ever had.  Wish us luck - good news is he should be competing at this level for the next 6+ years.


Pages: [1] 2 3 ... 47