This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 106 107 [108] 109 110 ... 271
5351
« on: July 12, 2019, 04:47:38 PM »
Contacted the Eng and going to have the entire plot surveyed while they are there. Eng won't change but I will have topo for the whole site for anything later.
While there I added a couple more vents to the container and tried to hook up the fan to a timer. 12v timer worked great but only wanted the fan running about 1/2 speed so I got a controller for it. Hooked that up and it burned up first thing! Well at least I have vents high and low on it. Probably just get a voltage reducer for it.
Tractor started right up, measured for the new seat. Will order when I get back from scout camp next weekend.
Neighbor was pulling a small dozer up and had to leave it on the hill, backed into the berm. Older dmax didn't have the weight for it. Was told is perk test for septic was great for our area, hope mine is as good. Just needs 1 leach line for a 3 bedroom home.
5352
« on: July 12, 2019, 04:31:57 PM »
Pretty standard in non communist states. Went from undeveloped land to a buildable lot correct JR? Did they give a reasoning for the engineering? Back in Indiana my wife and I did this several times. Largest concern there was water runoff etc.
Yes, runoff seems to be a major issue. Permit cost is about the same either way, kinda based off how much area you disturb.
5353
« on: July 11, 2019, 08:11:20 PM »
What a.mess, almost like they don't want you to do anything. Walked on at 0800 and left at 1300 with more papers than o want to say.
Have to get it surveyed and engineered. Found a local ( has to be NV certified) that will do it for about 2k, vs the 4 to 5 for the others.
So another 3 to week delay.
Good news is diesel is 50 cents less a gallon and some stations have alcohol free gas.
Having beer, clam chowder and pizza at BJs for dinner.
5354
« on: July 11, 2019, 01:23:50 AM »
No pictures, didn't happen.
5356
« on: July 11, 2019, 01:18:44 AM »
Found a site that gives altitude per coordinates, so that solved one issue. Washoe maps give coordinates on the pointer, just type them in!
Couple more detail drawings and hope I'm good.
Idea is to get to permitting early and show what I have. Tweak if needed and make copies and submit. That also clears me with code enforcement per a call today!
Do some final work on the cont fan since I have a timer and speed control now. Tractor needs basic service and a good cleaning. Will measure for the seat I found on ebay.
5357
« on: July 10, 2019, 09:07:34 PM »
Ken, just imagine H naked,,,,,,,,,,,,,,
5358
« on: July 10, 2019, 04:46:12 PM »
Always had good luck with them. There is one close to my new property too, hope they are just as good.
5359
« on: July 10, 2019, 02:49:21 AM »
Really Dave? Why what smooth legs you got pal!!
Sent from my iPhone using Tapatalk
Helps me run faster??? 
From Dave?
5360
« on: July 09, 2019, 05:42:34 AM »
Quakes were 450 miles south of me. No issues here, not even on the main fault line. Funny, I was flying into LA during the 87, this time in Florida and flying to AZ when they hit.
Ken, what the blank is that little black plastic rubber thingy in the lock kit? Found one of them in the door when I took it apart, now I have 2. Door will not lock with the remote, but all else works,,,,,,,,,,,
5361
« on: July 09, 2019, 05:29:43 AM »
Called the county about the grading permit. Sounds like it will just run about $300, then I can do some stuff.
2-4 weeks hopefully if not kicked back, no engineering needed yet.
Will run it up there this week, scouts all next week.
Let me know if you have any engineering questions, im a civil engineer. Cant practice there but can give my 2 cents
May just do that. Plan on doing the plans today sometime. Here are the basics I have to follow. Not that hard just need to make it look good, really just cutting a road and pad. https://www.washoecounty.us/building/Files/Files/grading_handout_cmplt.pdfhttps://www.washoecounty.us/building/Files/Files/Permit%20Application%20Grading.pdfEng. from the county today was helpful, even called me back with a basic fee. Said I could submit on 8x11 but 11x17 is better so that's what I'll do. Guess the big thing is how much dirt I move and no roads over 15*. Even told me I'm looking at about 20k CF, so no special permit needed (as I thought) as well under an acre. May have to ad lib a few slopes as only thing available to me is every 33ft. Going to run up Wednesday with the plans, latest Thursday as I am gone this next week again and have to get this going before the 20th per code enforcement.
5362
« on: July 08, 2019, 09:19:05 PM »
Ive seen kits to convert the 5s to a 6s, but is pricy! Valve body and TCM.
5363
« on: July 08, 2019, 03:38:43 PM »
Called the county about the grading permit. Sounds like it will just run about $300, then I can do some stuff.
2-4 weeks hopefully if not kicked back, no engineering needed yet.
Will run it up there this week, scouts all next week.
5364
« on: July 08, 2019, 03:35:55 PM »
Replacing the electric door lock in the camry. I need another joint and smaller hands. Down to the last clip where I need 3 hands.
5365
« on: July 07, 2019, 07:57:14 PM »
Stock. I thought it was pricey and a pain to put in.
5366
« on: July 07, 2019, 07:41:02 PM »
Try 500hp with lower gears, wow!
I have the SB. Got tired of the high priced filter and pain in the arse changing. Sure not all the time, but a pain.
5367
« on: July 07, 2019, 03:09:00 PM »
Works for me,,,,,,,,,,,,,
5368
« on: July 06, 2019, 02:13:35 PM »
Crowds were OK, heat with humidity made it no fun. Some great rides (pandora) and mostly the kids had fun when I wasn't the bad guy. Not worth 7K for sure though.
Got my sights on a 2010 Polaris now. More power, setup better and just 1 hour away. (cheaper too)
Main thing this week is getting the permit for my land and then scouts all next week.
5369
« on: July 06, 2019, 01:46:31 PM »
Pretty sure the codes have all been broken. get updates from EFI all the time.
5370
« on: July 06, 2019, 03:41:11 AM »
Home from Dworld. Taxing "vacation" with everyone going at everyone the whole trip. I got so fed up I sat out the last day in the hotel (yep, that bad).
So back to reality now, Daytona didn't work out and the youngest wanted to go too which would have been great.
5371
« on: July 06, 2019, 03:19:46 AM »
Dude, that was fast!
I was messing with mine for days...
Good work!
That's why I aid to have mine done (another story) and is doing great now. Posi is sweet too.
5372
« on: July 06, 2019, 03:17:17 AM »
Just go 06 and up. I would say stay with the LBZ years. More stock power, emissions easy to delete and 6 speed tranny.
Use the tranny as a core for a built unit. The 6.0 will fetch a good price too.
5373
« on: July 05, 2019, 11:53:53 AM »
Just find a wrecked truck..By the time you get all the parts, you will be ahead, maybe even has a nice rear too for that 80 thingy.
5374
« on: July 05, 2019, 11:49:32 AM »
Looks good from this angle!
Yep
5375
« on: July 05, 2019, 11:47:07 AM »
Well, my rear is doing great so far.
Jon and Sean, need to check my setup, 2500 miles away right now.
Going to ask about giving up my seat on the flight back(orlado). Get a late flight sat and go watch nascar at Daytona. Heck less than an hour away, rent a car lots of tickets online stilll.
5376
« on: July 05, 2019, 11:29:10 AM »
Sure Don will give you a raise. Right Don?
Had the drywall screw issue with my add on. Just electrical but frustraiting.
Most places don't allow runoff into others properties unless it was natural. Wouldn't that be a builder's issue?
Sent from disneyworld waiting for a bus.
5377
« on: July 02, 2019, 10:51:42 PM »
$3501 
5378
« on: July 02, 2019, 10:33:24 PM »
Holes for weight loss? I like the die idea though.
5379
« on: July 02, 2019, 03:11:43 AM »
I just bought a Factory Reman unit. Will be here when I get back from Vacation.
5380
« on: July 02, 2019, 03:10:20 AM »
I'm just marching out of the state. Real people have no say or have moved out or to nor cal where many ca laws are not enforced.
5381
« on: July 02, 2019, 01:46:10 AM »
Got a ride in a 55 chevy with a 502 and an Art Carr auto. First car that actually scared me.
Being over 60 now (61 on the 30th) I still would go auto.
5382
« on: July 02, 2019, 01:32:44 AM »
Tell you what, I have several of those HF guns and they work great. Got spares for just $10.
5383
« on: July 02, 2019, 01:23:38 AM »
JR, i was my $$ back.
you said NIB!!
hahaha jk. it looks amazing
I had to touch it at least!!
5384
« on: July 02, 2019, 01:17:36 AM »
Prayers for his safety and your well being/understanding.
5385
« on: July 01, 2019, 09:39:58 PM »
Dang, leaving Friday too,,,,,,,,
5386
« on: June 29, 2019, 09:50:16 PM »
Grew up with man, auto is quicker and easier.
5387
« on: June 29, 2019, 09:37:27 PM »
Sitting at Sac waiting 1.5hrs till our flight and looking for food. That doesn't help
5388
« on: June 29, 2019, 12:02:43 PM »
Looks good. I doubt the oil is for anything but lube but sure the water helps.
5389
« on: June 29, 2019, 11:36:18 AM »
I saw that too, doesn't it go through the motor first?
Also saw there was a SS ring for that. Never checked price. What about ceramic coatings?
5390
« on: June 29, 2019, 11:15:33 AM »
Where is all that AS going to go?
5391
« on: June 29, 2019, 11:10:38 AM »
If it were a rainbow flag and a Koran I bet they’d have stayed silent.
Sent from my iPhone using Tapatalk
Yep, don't want to offend anyone, LIKE AMERCAN CHRISTIANS would you.
5392
« on: June 29, 2019, 11:08:56 AM »
Working on the app today, leave 1700 tonite.
Buddy came over who lived there and gave me pointers.
5393
« on: June 29, 2019, 03:15:06 AM »
Just made a flippin mess! Fired up the Sub as I do every week or so and forgot I had removed the tube tranny cooler to install a bigger plated unit. Made a run to the store and got 2 bags of kitty litter, 1 is used up besides what I had already.
5394
« on: June 29, 2019, 03:08:19 AM »
Of course Ford had to have an issue with it. What is wrong with this country.
5395
« on: June 29, 2019, 03:06:28 AM »
Get back to it when I get back, off to Dworld for a week. Wallet hurts already.
5396
« on: June 29, 2019, 03:05:13 AM »
I hear good things about them. In fact I think they are considered smog legal in Ca out of the box.
Would be an awesome gift, I like auto though.
5397
« on: June 29, 2019, 02:57:29 AM »
Whats rain??????
5398
« on: June 29, 2019, 02:50:00 AM »
Turbo part, has Garret on the side.
5399
« on: June 28, 2019, 11:35:48 PM »
Yep, dry. Maybe to far away?
5400
« on: June 28, 2019, 09:28:32 PM »
Hey Jon, any of those have the weight dist mount on the tongues still? I got a hitch and bars cheap, but no mount for the tongue.
I think there might be. I will have to look next time Im at my partners place. He might have some laying around. DO you need the one with the chains?
Please!! Trailer is drilled for them too. I just have the arms and hitch.
Pages: 1 ... 106 107 [108] 109 110 ... 271
|
Show Posts