Point if order here:

I don't worry or get too wrapped up about things these days
I just make my requests known to the Lord, then move out smartly knowing he has this
Thereby avoiding the worry part
Result: I'm happy or content most of the time


Sent from my iPhone using Tapatalk

Any progress? Pics to confirm you still own said object, like one with a recent newspaper & date visible......

I understand.

Doubting Thomas even asked our Lord to stick his finger into the nail holes to confirm Jesus was still real!

that looks pretty sweet, I'm really interested on your temperature differentials when all is said and done since I'm only a few.miles north of you.

Dave

Should have it installed early in Feb, so we'll know soon.

OK...

I'll be ordering several small blower motors such as you'd find in your desctop computer. I found a few that are less than 5" in diameter that are 12 volt and push over 100CFM of air. Two of those in each collector with corresponding holes for the outlet should do the trick

After trimming these collectors and painting them green to keep the hippies happy, I'll get inside the unit and place the insulation all over creation. Following that, I only have hinges, cutting access for the 4" fill/collection pipe, and finding a spot and setting up the pump board

Next I laid a thick bead of polyurethane expanding foam onto the top surfaces, then pushed the poly-acrylic plastic into the gooey mess. This step both bedded the plastic panes nicely, and put the finishing touches of destruction to my fav T-Shirt!

Then after allowing those to dry for just long enough that only some of the paint got smeared onto my favorite ARMY T-Shirt, I married them back up with their housings

But I worked a bit on it today!

First up I pulled the heat collector grid and sealed them with silicone

https://www.youtube.com/embed/vM6dL7HCfP8

I was serious about the SG!

I mean we use it to close up wounds, seems to fit just fine over big tears, why not a tooth or tooths?

No Sean but our cells are being whacky...not sure whats up.

As I see it Sean's situation is a easy cheap fix. He just needs a Currie tone ring on one of his rear axles and he's set... minus the wiring he will do anything to avoid. My guess it's no big deal...

Now on a floater front...more challenging.

One option that would make it simple on a front 60 would be a Spyntech Kit..
http://spyntec.com/wp-content/uploads/9904_Ford_hub_3.jpg

not a cheap solution but totally possible. Now...the question would be does Chevy use some weird odd tooth count on it's brakes? If not....although not a cheap solution it's a workable one.

But I thought the Duramax crowd had a computer tune workaround to bypass the anti lock?

WFO has a disk brake brackets that adapt 2010 vintage Chevy brakes and speed sensor to a Ford King pin 60.... Don if that uses the same sensors or tone ring your golden...you could just swap to 2010 Front brakes.

WHAT?
WFO is the company I was working with two years ago with MY HUBS to solve this problem.

I'm off to their site to check this out...Better not have sold my hubs!

Whats all this topper plywood talk?

Don't ask

Old dead subject

Offensive to someone here...

Web site data page sez he's postin'

But I'm not seein'

Where's that frozen nebraske' corn farmer???

Didn't work on it past two days, so don't ask!

Total Personal Staff members for US First ladies
Mamie Eisenhower:  One - paid for personally, out of President's salary.
 
Total number of Personal Staff Members paid by Tax Payers
Jackie Kennedy:               One
Lady Bird Johnson:         One
Pat Nixon:                      One
Betty Ford:                     One
Rosaline Carter:               One
Barbara Bush:                 One
Hilary Clinton:              Seven
Laura Bush:                    One
Michele Obama:           Twenty-two
 
Yep.....your eyes don't deceive you. You want to read WASTE? ...Scroll on down.
 
Michele Obama's personal staff: Take a closer look
One..              $192,200 - Sher, Susan  (Chief Of Staff)
Two..              $160,000 - Frye, Jocelyn C.  (Director of Policy And Projects)
Three..            $133,000 - Rogers, Desiree G.  (White House Social Secretary)
Four..             $122,000 - Johnston, Camille Y.  (Director of Communications)
Five..              $120,000 - Winter, Melissa  (Deputy Chief Of Staff)
Six..               $110,000 - Medina , David S.  (Deputy Chief Of Staff)
Seven..           $104,000 - Lilyveld, Catherine M.  (Director and Press Secretary)
Eight..             $  95,000 - Starkey, Frances M.  (Director of Scheduling and Advance)
Nine..             $  90,000 - Sanders, Trooper  (Deputy Director of Policy and Projects)
Ten..               $  85,000 - Burnough, Erinn  (Deputy Director and Deputy Social Secretary)
Eleven..          $  84,000 - Reinstein, Joseph B.  (Deputy Director and Deputy Social Secretary)
Twelve..          $  82,000 - Goodman, Jennifer R.  (Deputy Director of Scheduling and Events Coordinator)
Thirteen..        $  80,000 - Fitz, Alan O.  (Deputy Director of Advance and Trip Director)
Fourteen..       $  77,500 - Lewis, Dana M.  (Special Assistant and Personal Aide)
Fifteen..          $  72,500 - Mustaphi, Semonti M.  (Associate Director and Deputy Press Secretary)
Sixteen..         $  70,000 - Jarvis, Kristen E.  (Special Assistant for Scheduling and Traveling Aide)
Seventeen..       $  65,000 - Lechtenberg, Tyler A.  (Associate Director of Correspondence)
Eighteen..        $  63,000 - Tubman, Samantha A.  (Deputy Associate Director, Social Office)
Nineteen..       $  60,000 - Boswell, Joseph J.  (Executive Assistant to the Chief Of Staff)
Twenty..         $  56,000 - Armbruster, Sally M.  (Staff Assistant to the Social Secretary)
Twenty-One...       $  55,000 - Bookey, Natalie  (Staff Assistant)
Twenty-Two...       $  55,000 - Jackson, Deilia A.  (Deputy Associate Director of Correspondence)

That's a Total...$2,075,200 in annual salaries - all for someone we did not vote for and apparently have no control over
 
5 staff are Muslim and 13 African-American.
 
There has NEVER been anyone in the White House at any time who has created such an army of staffers whose sole duties are the facilitation of the First Lady's social life.
           
This does not include:
 
"Makeup artist"   Ingrid Grimes-Miles, 49,
 
"First Hairstylist"   Johnny Wright, 31,
 
Both of whom traveled aboard Air Force One on ALL Trips, Europe included.

As of 11/15/2015 the Obama Family has spent over $1,300,000,000 (one billion, three hundred million dollars) on personal family trips. They were personal, not political or Government related.
 
How things have changed! If you're one of the tens of millions of Americans facing certain destitution, earning less than subsistence wages stocking the shelves at WalMart or serving up McDonald cheeseburgers, prepare to scream and then come to realize that the benefit package for these servants of "Ms. Michelle" are the same as members of the national security and defense departments and the bill for these assorted lackeys is paid by YOU.
 Copyright Canada Free Press
 
Yes...... The Canadian Free Press had to publish this, perhaps because America no longer has a free press and the USA media is afraid that they might be considered racist.

This project took about a week, every evening and 2 weekends.  :-[
My wife does the whole marathon thing, running farther than I typically like to drive, and needed a place to hang her medals in the bedroom. I told her i would make something but it had to be western, since the bedroom is the only place I have control (seemingly) over decorations.

...cut out a mountain back ground, and gouged out the ridges, and her initial that will look like white wash after hanging on the wall :


then I made a shelf with a corral made from square stock and round rod (to scale) with rods underneath for hanging medals, and a place to hang her placards:


...then the windmill, with copper blades:


Hmm..can't find a finished pic

Nominated:

Artsy-Fartsy award!

Unless I am old and forgot something, he can run just one wheel speed sensor and minus the ABS, everything will work correctly. Only the newer Jeeps need all 4 sensors. So regardless of combination....ya just "need" one sensor.

Sooooooo... sell your present 60 housing. Use a SD housing from any yard.. $225 here at the pick and pull when they have one. Use one Currie hub for your sensor and away you go.

I feel 8 lug is a no brainier because the rotors/calipers are off the shelf, everything is cheaper and simpler. Swapping that 9" to 8 lug is child's play. Used 8 lug wheels are a dime a dozen if your feeling all thrifty.

Koot,
Since you're all tuned into the D60 front axle world

Allow me to take this opportunity to completely change the subject (Junk up this thread) and ask for you to read in on my Silverado build
Remember when I was going to add in that HPD60 from a 2005 F350? It's a beautiful king pin thing that I just love to look at. Anyway, I have all the suspension parts, minus shocks, the axle housing, open carrier, 35 spline axles, knuckles, but no hubs. Sent them to _____Can't reacll their name, and they kept them.

Anyway, the problem was, we couldn't fit up the anti skid brake rotors to make that junk work and not flash dash lights at me all the time.

I was looking at a tighter than the Battleship Missouri turning radius out of the SAS front over the girly car suspension those trucks have.

Any clue how to do that...go ahead and write all you want, it's shawn's thread and he wouldn't care if we used this as the new discussion forum!
;-)

Here's a good grill guard

Actually guards all sorts of things

http://bumpersuperstore.com/i-16076382-trail-ready-10301b-winch-front-bumper-chevy-1500-suburban-tahoe-2000-2006.html

Well, it was a bit strange.

Bella's family had a Christmas death which chenged that all up

Both girls parents showed up and thanked Kathy, although one of them could not for the life of him figure out why anyone would do that. (Comes from not knowing a loving father is my guess)

So I asked Kat to reach out to both girls. She did, going over to their apartments. Sadie's parent thanked us a lot. He said had it not been for us, Sadie would not have known a Christmas. Her favorite gift was/is her bed spread, she just loves snugglin' up in it.

Not much else heard from the other parent. I have a strong suspicion that he fears his daughter's exposure to the "Religious kook" thing. Not solid proof, I just feel that way.
He doesn't get God, in fact is pretty angry with him, best I can tell.

And none of that matters. We are not to give based on what we get out of it, we are just supposed to plant seeds and help the least of his. And that is exactly what we did.

MC...

And I'll wager there is a lot more coming out of this before we sign out of this existence...

That is really weird

Relieving a commander ahead of time in the middle of a mission. Can't say I have ever heard of that happening before. I wonder why?

Quote from: Dawg25385 on January 12, 2017, 10:50:30 PM

Everywhere except work (against policy, persona non grata style), and where it's against the law (schools, govt buildings), and obviously where there not allowed and there is screening (sports stadiums, etc). I give a nice half smile when I see the signs at the theater, and even talked to our local police about legal ramifications of giving the same little smile to the "not allowed" signs at the state fairgrounds. Basically, if I'm not gonna land in jail if exposed, that's the decision criteria.

Also, I will say, I will disarm if I've had a couple drinks and decide to have "one more", even at home. At that point to me the decision is one or the other, not both.

I agree.  Maybe 1 beer out.  Maybe 2 at home.  That is just a force multiplier against me if I ever had to make a decision involving a firearm.

Sent from my iPhone using Tapatalk

On that note, I'd say this: If you are in an area where you feel a threat, or suspect it is there, then do not drink. Drinking slows down your mind, reflexes, dulls everything and opens you to recourse. The reality of Black lives matter being more important than police in this upside down world mandates we stay up on the ready. Spouse partaking is OK, but we stand guard over ours.

Lift kit, build thread...lift kit, build thread...lift kit bui..........

Well, men lets include the good people of Nebraska and surrounding real estate in our prayers. Lift them up for safety throughout the coming storm.

That's why we gather here at the RMTWS church.

Everyone lift up those folks one or two times PP...

Quote from: Flyin6 on January 12, 2017, 02:59:01 PM

Quote from: Superwhdm on January 12, 2017, 01:36:39 PM

CJ, soooo what your saying is.....you carry a 1911......IWB.....and it's comfortable? And it disappears??? IIIIInteresting.

What he's not telling you is he had a large section of his torso surgically removed to fit the 1911!

LOL! I was part of a government genetic engineering program specifically designed around that great work of art designed by Mr. John Moses Browning. 

I was a part of that same project...to see if an armee soldier could operate just as effectively without a brain. I helped prove the concept and created the warrant officer branch!
True story

or not...