VEHICLES, CAMPERS, and BOATS > General Maintenance, How to/DIY projects

Replace batteries in 2008-2014 NBS GM trucks

<< < (2/4) > >>

Flyin6:
Clean the battery tray if necessary, and apply a light coat of grease to the threaded holes you removed the various bolts from.

Flyin6:
Prep your new battery. Remove the shipping caps and apply grease to the terminal ends. Record any serial numbers or pertinent data and be sure to annotate the installation date. I marked the date on the battery itself.

Flyin6:
Call your neighbor, the one who disagrees politically with you over and have them lift the new battery into place. Install the hold down first, then the inner brace. Then reinstall the terminal ends

Flyin6:
Reinstall the fender/cowl brace and call this job 50% complete!

Flyin6:
Next, on to the driver side battery

Navigation

[0] Message Index

[#] Next page

[*] Previous page