Author Topic: WDYDT (What Did You Do Today) (Read 1396528 times)

TexasRedNeck · « **Reply #15700 on:** September 21, 2021, 01:25:05 PM »

Brown Santa dropped these off today

Time to get back to practicing

1000 rounds of 9mm

Sent from my iPhone using Tapatalk

JR · « **Reply #15701 on:** September 21, 2021, 04:32:55 PM »

Used to change those rears all the time, usually on an exchange basis.

Dang, hope those were good price. Used to be $9.97 at wally's.

TexasRedNeck · « **Reply #15702 on:** September 21, 2021, 10:37:14 PM »

Quote from: JR on September 21, 2021, 04:32:55 PM

Used to change those rears all the time, usually on an exchange basis.

Dang, hope those were good price. Used to be $9.97 at wally's.

Yeah I used to pay 190 to my door. These were $340 delivered

What I like about them is I can use a magnet sweep to pick up the empties. I have plenty of brass cased but it’s hard to locate in the grassy area I have my range set up in. I hate losing brass.
Sent from my iPhone using Tapatalk

Flyin6 · « **Reply #15703 on:** September 21, 2021, 11:13:34 PM »

Quote from: TexasRedNeck on September 21, 2021, 01:25:05 PM

Brown Santa dropped these off today

Time to get back to practicing

1000 rounds of 9mm

Sent from my iPhone using Tapatalk

I picked up 1000 rds of that with the steel case. Had several malfunctions where I had partial ignition or something like that. In every case, the actual bullet remained stuck in the barrel!!!!!

Bob Smith · « **Reply #15704 on:** September 22, 2021, 12:24:30 AM »

Now that is just plain not funny.

Flyin6 · « **Reply #15705 on:** September 22, 2021, 12:38:14 AM »

Quote from: Bob Smith on September 22, 2021, 12:24:30 AM

Now that is just plain not funny.

I posted a pic somewhere on the site of one bullet just sticking out of the bore.

Farmer Jon · « **Reply #15706 on:** September 22, 2021, 07:43:07 AM »

I have a few boxes of those as well. I will be careful. Maybe I should use them up first.

TexasRedNeck · « **Reply #15707 on:** September 22, 2021, 08:17:23 AM »

Interesting, I’ve run 20,000 rounds of wolf/tula down my G17 trainer and never had a single malfunction.

Of course Tula is no longer making Wolf but you get the point. We’ll hope the Ruskies were fully awake at the plant when this was made.

Sent from my iPad using Tapatalk

stlaser · « **Reply #15708 on:** September 22, 2021, 11:00:34 AM »

Never had issue with wolf / Tula however, I ran the last of what I had back in august and until price comes down I’ll keep buying brass cased. I feel at least I have something once it’s fired that’s worth money still to offset the cost a bit. Yeah, I know the math doesn’t work out but I personally feel better about it anyhow. Just bought a case of 115gr pmc in 9 the other day for 49 cents delivered. Not sure if that’s good or bad atm but outfit I buy from gave free shipping so I ordered some more.

TexasRedNeck · « **Reply #15709 on:** September 22, 2021, 12:39:01 PM »

Not too bad a price. Essentially I paid 34 cents to my door on this. I can get 9mm once fired brass for 6 cents so I may still be ahead.

I really need to manicure my shooting range so brass is easier to find. However stepping over rocks and exposed tree roots sure makes moving and shooting more challenging.

Sent from my iPhone using Tapatalk

JR · « **Reply #15710 on:** September 22, 2021, 06:32:21 PM »

Sounds like real live shooting. You may not have manicured grass on cement when you need to shoot!

Yep, between bullets and primers loading for less is getting tuff.

Farmer Jon · « **Reply #15711 on:** September 22, 2021, 07:31:04 PM »

I misspoke earlier. This is what I have. I must have had the other brand in the past

Sent from my Pixel 5 using Tapatalk

rpar86 · « **Reply #15712 on:** September 22, 2021, 07:31:38 PM »

Quote from: JR on September 22, 2021, 06:32:21 PM

Sounds like real live shooting. You may not have manicured grass on cement when you need to shoot!

Yep, between bullets and primers loading for less is getting tuff.

But when you NEED to shoot you likely won’t care about collecting your spent brass either ;)

KensAuto · « **Reply #15713 on:** September 22, 2021, 10:08:04 PM »

Need some input guys, and don't wanna start a new thread....
Would 10k be too much to pay for an LB7 with 190k on it? Really haven't been keeping track of prices. Was thinking it would make a good 4wd for my Idaho place, even though I hate working on lb7s. Online I'm seeing anywhere from 6k clapped out to 25k for a super clean version.

Paint failed so they bedlined it. Looks decent. Interior not great. Typical loose front end.
Normally just buy crap without consulting but I'm trying to change that. I value most of your opinions (except hippies in Colorado)

What say yee people?

Sammconn · « **Reply #15714 on:** September 22, 2021, 10:19:50 PM »

Quote from: KensAuto on September 22, 2021, 10:08:04 PM

Need some input guys, and don't wanna start a new thread....
Would 10k be too much to pay for an LB7 with 190k on it? Really haven't been keeping track of prices. Was thinking it would make a good 4wd for my Idaho place, even though I hate working on lb7s. Online I'm seeing anywhere from 6k clapped out to 25k for a super clean version.

Paint failed so they bedlined it. Looks decent. Interior not great. Typical loose front end.
Normally just buy crap without consulting but I'm trying to change that. I value most of your opinions (except hippies in Colorado)

What say yee people?

I will have an LBZ for sale by spring…

TexasRedNeck · « **Reply #15715 on:** September 22, 2021, 10:35:02 PM »

Man, denigrating the #7

10k is probably in the ballpark but as you know it can cost you 10k more in a blink of an eye

Hate to say it but unless you need to tow a bunch find a beater gasser, much cheaper to fix or repair daily….see what I did there?

Sent from my iPad using Tapatalk

JR · « **Reply #15716 on:** September 22, 2021, 10:36:47 PM »

Only if it has the injectors done. Gasser might be better as TRN said, unless you plan on towing a lot.

Is the whole thing bedlined?

KensAuto · « **Reply #15717 on:** September 23, 2021, 12:51:40 AM »

Sam

Charles, the last 7 I did injectors on was this one and the pain is still fresh. I bought an 04 1/2 ton last year that needs a trans, just kinda partial to the dmax, and I thought it was a decent price, but don't have to have it.
... that being said, once you get a taste of diesel, a gasser just don't seem to cut it.

JR, she's covered head to toe, except the bumpers. ...and for some reason inside the bed itself. Lol

Flyin6 · « **Reply #15718 on:** September 23, 2021, 11:44:02 AM »

Seems a bit spendy Ken

Duane, as we speak is looking over a 1990 F350 dually, 6.9, 5-speed single cab, 150K with zero rust for an asking of $6K
Kind of like a gasser, I mean a 6.8...really?? But, hey, I owned one, and it would pull a trailer. Starts most of the time too!

And what about an older 454 stick truck? no brainer...screams but pulls and generally reliable. One in the paper locally...

Bob Smith · « **Reply #15719 on:** September 23, 2021, 12:46:56 PM »

If your thoughts are to drive wife’s car back and forth and have a rig for you to use then as long as it runs when you need it, sounds like a plan. If you keep using your truck to drive back and forth maybe a car for your wife to use would be better.

KensAuto · « **Reply #15720 on:** September 23, 2021, 05:52:12 PM »

Ok. I turned it down. Probably just have the trans rebuilt in the 1/2 ton. I don't need to be buying anymore crap right now anyway. Gotta save for a cabin.

Bigdave_185 · « **Reply #15721 on:** September 23, 2021, 09:39:04 PM »

The only argument I would make for a diesel up in idaho is the price of fuel is cheap, and you have rented some larger equipment already and towing large loads can be a pain with a gas truck

Sent from my iPhone using Tapatalk

TexasRedNeck · « **Reply #15722 on:** September 25, 2021, 06:31:48 PM »

Started making a grate for the charcoal pit. Ran out of 3/8 rod.

Bought some 3x3 sq tube to make the base for a welding table. Didn’t buy enough 3/8 rod though. Doh.

Looked a a 3ft x 6ft 3/4 plate for the welding table but it was $1.25/lb so over $600 for the table top. I’ll wait a while

Then welded 8 attachment points into the inside of the trailer.

Sent from my iPhone using Tapatalk

Atkinsmatt · « **Reply #15723 on:** September 26, 2021, 04:19:29 PM »

Just got back from a 3-day hunting trip with my son. The final score was two bucks. 2 does and 5 Wild Hogs

Flyin6 · « **Reply #15724 on:** September 26, 2021, 07:47:15 PM »

Just back from a reunion with a group of pilots/crewchiefs I served with 40 years ago in Germany. Good down to the soul!

JR · « **Reply #15725 on:** September 26, 2021, 08:40:17 PM »

Just got a 12x20 carport NIB off FB for about 1/2 retail.

Bob Smith · « **Reply #15726 on:** September 26, 2021, 09:02:38 PM »

Sounds like it was a great trip Matt. Good times spent with your son and lots of meat coming home with you.

Atkinsmatt · « **Reply #15727 on:** September 27, 2021, 09:28:48 AM »

It was great to spend time with him. Lots of meat.

Sammconn · « **Reply #15728 on:** September 27, 2021, 10:30:52 AM »

Spent too many hours sitting on a bag of rags inside the engine bay of my truck...
Cleaning and replacing wire loom and prepping for paint.

As much room as there is, it is quite uncomfortable.

rpar86 · « **Reply #15729 on:** September 27, 2021, 12:29:17 PM »

Quote from: Sammconn on September 27, 2021, 10:30:52 AM

Spent too many hours sitting on a bag of rags inside the engine bay of my truck...
Cleaning and replacing wire loom and prepping for paint.

As much room as there is, it is quite uncomfortable.

I know your plight all too well.

JR · « **Reply #15730 on:** September 27, 2021, 11:57:41 PM »

For what you are doing maybe just pulling the clip would help?

rpar86 · « **Reply #15731 on:** September 28, 2021, 01:36:24 AM »

Yeah pulling the fenders is stupid easy and gives you gobs of room.

Nate · « **Reply #15732 on:** September 28, 2021, 10:07:03 AM »

My morning will be spent as a volunteer for the korn ferry stage 1 qualifing school.

For those that may not know, the korn ferry tournament is the precursor to the pga. Unless you are so good that you get a major sponsor, all pga hopefuls must go thru yhe qualifying school, make the actual korn ferry tour and hope they score well enough to get their pga card.

EL TATE · « **Reply #15733 on:** September 28, 2021, 01:06:29 PM »

I'm on a Robert Trent Jones course and have a guest room, just sayin. looks like fun

Quote from: Nate on September 28, 2021, 10:07:03 AM

My morning will be spent as a volunteer for the korn ferry stage 1 qualifing school.

For those that may not know, the korn ferry tournament is the precursor to the pga. Unless you are so good that you get a major sponsor, all pga hopefuls must go thru yhe qualifying school, make the actual korn ferry tour and hope they score well enough to get their pga card.

JR · « **Reply #15734 on:** September 28, 2021, 01:47:24 PM »

Whats the green stuff?

EL TATE · « **Reply #15735 on:** September 28, 2021, 01:50:02 PM »

Quote from: JR on September 28, 2021, 01:47:24 PM

Whats the green stuff?

in CA, pot's legal, grass aint, lol

oklawall · « **Reply #15736 on:** October 01, 2021, 01:01:13 PM »

Younger daughter was selected to run in the OKC marathon with the governor Challenge relay team to remember the Oklahoman's that have been killed in action during the Iraq and Afghanistan wars. She will be run for her brother Bret.

Sent from my SM-N975U using Tapatalk

TexasRedNeck · « **Reply #15737 on:** October 01, 2021, 05:58:12 PM »

That’s amazing!

Sent from my iPhone using Tapatalk

Farmer Jon · « **Reply #15738 on:** October 02, 2021, 07:54:13 PM »

Had a pretty successful day selling popcorn. Set up a local farm store. Both boys met their first goal of selling $500 apiece. It didn't hurt that I knew a lot of the people that came in. Mondy night we hit up a couple of my favorite watering holes. AKA Chester's bar and the Roadhouse. Buy a couple rounds and sales come rolling in. Yes the wife will be driving.

Sent from my SM-T727V using Tapatalk

KensAuto · « **Reply #15739 on:** October 02, 2021, 07:55:32 PM »

Finally put my sign up. Started with a forklift, ended up using a winch and pulley. Still need to put up the phone number section up above, but it's aluminum and much lighter.

Also had a freak storm Wednesday night. Came to work and noticed water marks on customer cars and buildings from 3 to 6 inches deep. Looks like the street turned into a river and just ran over the curb. Must have drained through the neighbors fence by the time I got to work. Weird

stlaser · « **Reply #15740 on:** October 02, 2021, 08:14:05 PM »

So last 24 hours have been a little rough, ended up at the UNC & MT State game today with beautiful 70 degree sunny weather.

At 1 pm yesterday drove to DIA to fly to MT, half hour prior to flight taking off they cancelled flight (thanks SW!). No other flights to Bozeman so we went home. Grabbed 4Runner and at 5pm drove to Bozeman getting in at the wee hours of 3am. Grabbed 4 hours of sleep and got up to see daughter and have breakfast then went to game. As of 5pm we crashed back at the hotel for a nap. Taking Shelby and her BF to Yellowstone tomorrow for the day. Jacob the bf carried MT ST flag b4 game for his ROTC. Pretty cool all in all, lemons and lemonade……

Sent from my iPhone using Tapatalk

Sammconn · « **Reply #15741 on:** October 02, 2021, 10:03:03 PM »

Today helped the kiddo install new flooring at their house. Some sort of whitewashed oak or something.
Vinyl planks, super easy to work with.

Sent from my iPhone using Tapatalk

Bob Smith · « **Reply #15742 on:** October 02, 2021, 10:30:05 PM »

Took my friends ashes, his wife and his son on a long two hour boat ride yesterday to spread his ashes across the bay.
Then after returning home had to drive down to my brothers place to be beside him for a while. He has been fighting liver cancer for a few years and the time has come to say goodbye.
Now I am getting packed up for a couple weeks hunting and remembering all the good times I have been blessed with sharing time with family and good friends.
Thanks Don for the wonderful site filled with great people with a common cause and beliefs.

Nate · « **Reply #15743 on:** October 02, 2021, 11:24:07 PM »

The last of the jalapeños are soaking to make bread and butter jalapeños and the other half is in the dehydrator for the next couple days and will then be made into jalapeno powder.

stlaser · « **Reply #15744 on:** October 03, 2021, 09:57:41 AM »

Quote from: Sammconn on October 02, 2021, 10:03:03 PM

Today helped the kiddo install new flooring at their house. Some sort of whitewashed oak or something.
Vinyl planks, super easy to work with.

Sent from my iPhone using Tapatalk

We laid that in our farmhouse kitchen and dining room. It was a great floor solution and price was hard to beat. Easy to clean and held up extremely well. We have Hugh dollar wood floors now and I’d much rather have that again.

JR · « **Reply #15745 on:** October 03, 2021, 01:37:44 PM »

Used similar in the daughters room, vinyl is nice.

Farmer Jon · « **Reply #15746 on:** October 03, 2021, 04:11:50 PM »

My latest free camper. It had lots of potential but the door popped open on the way home and blew off. Some lady had her brother living in it but when he moved out he left the roof vent open and it stayed open all summer.

Sent from my Pixel 5 using Tapatalk

oklawall · « **Reply #15747 on:** October 03, 2021, 04:37:27 PM »

Watched the daughter cross the finish line with the governor relay team. I tried to post the video but sorry it is to big so you only get a picture. The governor is the big gut in the center and Krysten is the only female (beside the governor)

Sent from my SM-N975U using Tapatalk

KensAuto · « **Reply #15748 on:** October 03, 2021, 05:19:53 PM »

Quote from: Bob Smith on October 02, 2021, 10:30:05 PM

Took my friends ashes, his wife and his son on a long two hour boat ride yesterday to spread his ashes across the bay.
Then after returning home had to drive down to my brothers place to be beside him for a while. He has been fighting liver cancer for a few years and the time has come to say goodbye.
Now I am getting packed up for a couple weeks hunting and remembering all the good times I have been blessed with sharing time with family and good friends.
Thanks Don for the wonderful site filled with great people with a common cause and beliefs.

Sounds like you've had an emotional week. Hunting is a great cure. Good luck Mr. Bob.

Bob Smith · « **Reply #15749 on:** October 03, 2021, 09:30:18 PM »

Thank you Ken. With Gods help holding me up I am doing ok. Yes getting old is better than the other option but instead of family and good friends, I now have memories.