This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
1
« on: May 15, 2024, 01:08:49 PM »
Once the vets stop trying to out do each other,,,,,,,,,,,,,,,soon as possible.
Weather is where I need it, perimitter is staked, just need the kubota running (fuel issues) or exc up there (kinda got on the back burner but its time!). Skid is fine, will need it to break the rock with the hammer.
2
« on: May 14, 2024, 09:20:04 PM »
Famous last words,,,,,,,,,,,,,,
Least you have the shop back!
3
« on: May 14, 2024, 08:53:47 PM »
Anyone stung yet?
4
« on: May 14, 2024, 12:33:18 PM »
You guys are fun,
5
« on: May 13, 2024, 06:27:11 PM »
I have to be fugal watching you spend!
6
« on: May 13, 2024, 02:07:30 PM »
Nice and even a cab! No DEF on that thing? My little 45L is trying not to run and doing a fine job.
7
« on: May 13, 2024, 02:03:45 PM »
Yep, I sold my folding steps too. Going up to Reno I found I like the side protection for the truck. Sure I have to step up a little more, but its a trade off.
Talking on bumpers, I have had a nice HD bumper kinda hidden in the garage for the last few years. It came out a couple weeks ago and getting ready to go on. I've been lucky on the "road kill" side so far.
8
« on: May 13, 2024, 01:18:36 PM »
I like deals and I need it all. Little more organization and I can dig a foundation.
Right now though I have all 3 tractors down. All run just being finicky
9
« on: May 12, 2024, 03:05:31 PM »
Bucket on there has been making the trip a few times now. Still waiting for the quick attach ears which I have.
Kubota started great, then started sputtering again. Sure is a fuel issue, so going to get all new lines and a pump. I was able to sputter along just enough to unload the trailer.
The stairs are something I have been looking and a deal finally came up. Advertised as 14 tall, but actually 9 (they included the rails) For now it will allow access to the cont top, later I will use inside the shop as it matched the drawings for second floor access.
10
« on: May 12, 2024, 02:55:02 PM »
Made another run this saturday, trip was uneventful. Good load of stuff, still got 16 mpg.
Found I had the wrong hose for the Skid, so no worky this weekend. Also the battery switch is totally non op. Brough a new one, but access is a under the control.
11
« on: May 10, 2024, 01:14:52 PM »
Fantastic!!
12
« on: May 08, 2024, 02:30:20 AM »
Did you paint it orange for that kinda damage? Gues I missed it, how did you damage it?
Good plan on the batteries, mine are great so far at the ridge.
Does it have a hot water heater on demand unit?
13
« on: May 08, 2024, 02:14:46 AM »
Dang, just saw this. Not sure which is better, Don kicking around at 70 or the pistola!
Yep Tex, they even had an FBI load for the 10mm, wimps. Now their back to the 9mm so they can spray and pray.
14
« on: May 08, 2024, 01:56:30 AM »
I have ether, but just got an air tank seater. Not as fun but simple. probably need to pull off and clean the bead area, still rough after the flood.
15
« on: May 07, 2024, 02:26:00 PM »
I just verify with my phone. 4mph under at 70 for dmax, tahoe is dead on.
16
« on: May 07, 2024, 03:50:17 AM »
It did not like either at all! Alls good now, hopefully this week it starts fine. Did get a new fuel filter and battery.
Picked these up today, $400 for 5 sets. What a pain to take apart though, took 3 hours for my son and I. They were a little rusty in spots and in the dirt, zero dark thirty getting out of there. (East of Lodi)
17
« on: May 05, 2024, 09:20:00 PM »
Thought the radius arm pivots and the 4 link keeps it more or less parallel? Maybe the factory arms are way diff lengths, that would account for some pivot.
Not trying to talk D out of anything, just wondering if I'm thinking right.
18
« on: May 05, 2024, 08:56:40 PM »
Is it 4 link or radius arm? Radius yes, 4 link no, or so I understand.
19
« on: May 05, 2024, 07:43:45 PM »
Been looking for wheels as we do the other stuff. Stock 15x7 have almost a 6in BS for gosh sakes! We want 15x8 and if they are 4in BS and we use the 1in adapter we get about what we want. PPL on FB just say its off a jeep or cherokee, there are so many diff setups for that and lug patterns.
1 set was sold before I got there (good ol FB) and the others I'm looking at now he won't give the BS (see above).
20
« on: May 05, 2024, 07:37:23 PM »
Why an alignment? Solid front axle and no changes?
Don't remind me about the yard! I need pretty much all new grass since the leaves never got raked up last year, I mean why have kids!!!
21
« on: May 05, 2024, 07:06:21 PM »
Chore, thought it was fun? Almost can't tell there are 2 dogs there, spot above the nose gives and eye is about it.
Glad the bags aren't leaking, some you don't have to think about now.
At least it has a solid axle, IFSs are worse.
22
« on: May 05, 2024, 06:17:22 PM »
Sold the old tires and rims, $600. Offsets the tire purchase and I have more room.
23
« on: May 02, 2024, 11:00:42 PM »
A cookie and cold water would help too.
24
« on: May 02, 2024, 09:46:11 PM »
I bet is the post office who dictated the com box.
Bad weld on bad metal.
25
« on: May 02, 2024, 12:45:27 AM »
Local Sams has Diesel, but not a member there now.
Folsom has Diesel and was cheaper last time I went there. Using a Maverick in west Sac that is about .50 cheaper, but still more than NV. In fact getting out of washoe county it goes down another 30-40 cents normally.
26
« on: May 02, 2024, 12:41:21 AM »
Sure I will get that sooner or later. A lot of rock out here.
27
« on: May 01, 2024, 07:44:00 PM »
Costco here is the same as the stations and No diesel! Why be a member?
28
« on: April 30, 2024, 10:17:48 PM »
29
« on: April 30, 2024, 08:03:55 PM »
Well, the fix price was right.
30
« on: April 30, 2024, 07:38:27 PM »
Here in Oklahoma $3.49 for premium 100% gas. I just paid $3.22 for diesel Yep, good ol Kali, ouch.
31
« on: April 30, 2024, 07:22:20 PM »
DIC is dead on so far at 17.9 MPG and used 19 gal. Calced out to the same, close enough for me.
Local gas is $5-6, but have seen high 6s. What are you guys paying?
32
« on: April 30, 2024, 12:00:00 PM »
You mean you don't "normal"? Totally with you there, think maybe a better spring might be a better option.
No, that is just a trim I have done every few years is all. Means more now with solar is all and stupid kali power pricing. I used to do it myself, but going up a 60ft tree is not in my skill set now. I was going to rent a boom lift, but by the time I did that, did the work and hauled it all to the dump, this was cheaper!
33
« on: April 29, 2024, 10:27:48 PM »
Yep, you need a permit to cut down a tree in the city normally, not to trim. I still have some touch up to do but solar production is up almost 5k today and yesterday.
Dang Sam, maybe better springs vs trimming the frame?
34
« on: April 29, 2024, 10:09:09 PM »
Getting there. Dodge has always had solid running gear. Some of the earlier auto trans were not up to snuff and not a huge fan of the AAM front axle.
Stock wheels look good too.
Doing steps on it too? I sold my powersteps as I prefer the side protection of the stationary.
35
« on: April 29, 2024, 05:03:44 PM »
Toys are good. Finally got my Kubota running again, slowed me down a lot!
36
« on: April 28, 2024, 05:44:18 PM »
Also did new weatherstrip on the drivers door, little hard to close but better. More cleaning needed, it was a mess under there.
Averaged just over 18mpg for the trip. Even gas up in Reno is $5 a gallon, geeze. Thats 2-3 better than it was, more than worth it and looks like I sold the old set on FB.
37
« on: April 28, 2024, 03:56:06 PM »
Been looking to get the tree out front trimmed for a few years now. Last solar "true up" bill put me over the edge. Plus I am adding more solar.
Guy came by friday, said 2k with haul off. I said 1500 and the are just cleaning up now. Massive trimmings so the panels get all day sun now.
38
« on: April 28, 2024, 03:52:32 PM »
Mine does not believe in drawers, everything is laying around. All the drawers and boxes are filled with "keepsakes", if the kid even looked at it, she wants to keep it. I am not perfect but I don't have a trail to the bed!
39
« on: April 28, 2024, 03:49:08 PM »
Nice day at the ridge.
Got the Kubota worked out and running. Was the fuel system, just old and some air got in. Cleaned up the lines, rerouting and cutting ends off. Checked the pump and cracked a couple injector lines, runs like it should again.
Speaking of fuel, Dug was leaking and needs a service. Filters are 4 years old. Leak was and injector return line is all and had some line. Tire came off again (same one) so I need to clean the up and reseal. Time for a "bead blaster" the 16.5 don't seat easy.
40
« on: April 26, 2024, 08:48:45 PM »
Wheels look pretty good, I like the black. Wells are filled nicely too.
41
« on: April 25, 2024, 12:26:06 PM »
After I retorqued the wheels, I did some weight calculations.
Besides being 1 inch narrower, they are 44lbs lighter than the nitto combo and steel wheels, thats each wheel! 40psi seems about right, wear looks OK and all the little tits are still on the tires.
Balance feels good, guess the 6oz beads were about right. Haven't calced a full tank yet but with the DIC working it shows low 16 average which is 2-3 more than before.
42
« on: April 24, 2024, 09:54:30 PM »
43
« on: April 24, 2024, 07:48:43 PM »
I could see for a semi auto.
44
« on: April 24, 2024, 07:15:18 PM »
Nope, just a standard 12g pump.
45
« on: April 24, 2024, 12:19:06 PM »
Might just be a typo?
46
« on: April 24, 2024, 11:16:33 AM »
AAM is known for a truetrac LS, bet thats it. But that would not require a friction modifier being all gears?
Yep, I have gone off brand the last couple times, so far so good.
47
« on: April 23, 2024, 07:20:54 PM »
That LS looks good in there. I liked the nittos on the Tahoe, but now they are $300+ each! Got the 4 prinx for $700 delivered.
I was using valvoline before, but found the Lucas a bit cheaper by the gallon when I got for the excavator and have stuck with it. Has a great rep.
48
« on: April 23, 2024, 04:56:40 PM »
Pulled the dash panel, painted the new panel plugged in the NTM switch and I have full DIC options now. Paint is close and have to do.
49
« on: April 23, 2024, 12:16:50 PM »
The 100’ rolls of 4” flex
Guess I'm blind, I see what they are now.
50
« on: April 22, 2024, 11:47:17 PM »
Rings for the swail drainage. You answered it but I was wondering about the rings before.
|