Author Topic: M715.9 (Read 146689 times)

Wilbur · « **Reply #550 on:** October 19, 2016, 04:10:04 PM »

That is sweet! Nice work!

swbhobie16 · « **Reply #551 on:** October 19, 2016, 06:25:13 PM »

Quote from: JR on October 19, 2016, 03:42:07 PM

Up front, be different.

the '03-05 cummins' (year models of the emblem) went up front. that's why i'm leaning towards putting it up front. they moved them behind the fender and almost doubled the size of them in '06.

swbhobie16 · « **Reply #552 on:** October 19, 2016, 06:27:53 PM »

Quote from: stlaser on October 19, 2016, 02:27:13 PM

You probably stated already but what size tires are going to fill up those fender wells again?

i'm shooting for 37" MTRs from the newer hummers. but it may even end up being 40" toyo open country MTs. the MTRs are readily available at swaps and surplus.

the tires that are pictured measure out to ~35" tall. maybe a hair more. but no where close to 37s

stlaser · « **Reply #553 on:** October 19, 2016, 06:33:40 PM »

Nice, in my humble opinion if the rollers are measuring 35" I think this needs a 40" tire......

swbhobie16 · « **Reply #554 on:** October 19, 2016, 08:18:53 PM »

i agree. priority #1 is to get it to run down the road at 60. once my dad sees that and knows it runs.. might be a tad easier to get $2k out of joe pocket for the toyos. lol

cruizng · « **Reply #555 on:** October 20, 2016, 08:23:14 AM »

Very sweet build. Thumbs up! :)

TexasRedNeck · « **Reply #556 on:** October 21, 2016, 07:38:34 AM »

No emblems. Just me but I hate emblems. Stealth mode

Sent from my iPhone using Tapatalk

BobbyB · « **Reply #557 on:** October 21, 2016, 09:15:44 AM »

Quote from: TexasRedNeck on October 21, 2016, 07:38:34 AM

No emblems. Just me but I hate emblems. Stealth mode

Sent from my iPhone using Tapatalk

I second this.

JR · « **Reply #558 on:** October 21, 2016, 10:20:18 AM »

I could see that with no emblems. Would look good.

Keep the tire thin for that classic look.

EL TATE · « **Reply #559 on:** October 21, 2016, 11:31:38 AM »

$2k for toyos, what rim size??

Flyin6 · « **Reply #560 on:** October 21, 2016, 11:34:27 AM »

Not even a cool decal for improved aerodynamics???

swbhobie16 · « **Reply #561 on:** October 21, 2016, 12:51:08 PM »

Quote from: EL TATE on October 21, 2016, 11:31:38 AM

$2k for toyos, what rim size??

well.. the 40s come in 17", 18" and 20". so i'm going to have to find a set of 17/18s and upsize from the 16.5" hummer rims.

Quote from: JR on October 21, 2016, 10:20:18 AM

I could see that with no emblems. Would look good.

Keep the tire thin for that classic look.

i'm thinking about having some M715.9 emblems cut from 11 ga sheet metal in the same font as the 62-67 gladiator J200 and J300 fender emblem. in which case, it would go behind the tire/in front of the door. these would be painted semi gloss black. and i'm highly considering cutting 'turbo diesel' off the cummins badge and painting the C semi gloss as well.. with either red or beige lettering. these are all fit and finish/detail.. but i like thinking about them while i'm not able to do physical work on it. hahah. im not sold on the cummins emblems completely.. but they were a good deal and NOS. so i grabbed em.

also.. they're going to have to be at least 12.5" wide.. can't seem to find any tires 37"+ that are less than that. which won't look bad. not going 13.5-15.5 like the TSLs and IROKs come in..

JR · « **Reply #562 on:** October 21, 2016, 01:05:37 PM »

Quote from: Flyin6 on October 21, 2016, 11:34:27 AM

Not even a cool decal for improved aerodynamics???

That only works on toolboxes,,,,,,,,,,,,,,,

EL TATE · « **Reply #563 on:** October 21, 2016, 01:28:07 PM »

12.5" wide and 40" tall will still look skinny, don't worry about that. I like the old Jeep emblems, and the cummins emblem. While you're fabbing emblems, why not a cummins emblem in the jeep script? something to the effect of "M715.9 powered by Cummins" but in that cool Wagoneer script? Also, what about tires like these?

I was looking at the 700-16 NDT's but couldn't find you anything in 40" or anything that wasn't biasply poly, which suck w/ weight and hwy use.

JR · « **Reply #564 on:** October 21, 2016, 01:36:20 PM »

I like the tires and those are surplus now right?

Maybe like this;

M715.9
CUMMINS
TURBO DIESEL

EL TATE · « **Reply #565 on:** October 21, 2016, 05:14:35 PM »

I was thinking like this font, reminds me of the old Wagoneer emblems

swbhobie16 · « **Reply #566 on:** October 21, 2016, 05:38:30 PM »

i like the funky M715.9 in wagoneer script. i'm sure it'll be something of the sort. those are some rather large tires. i'd be ok with them, but bear in mind that this is an old mans (50 yr old.. hahaha ;D) kaiser. i'm thinking we will put a set of 37" hummer MTRs on it and see how they look/ride. ive already prepped him for 40s should the need arise.. but he would like 37s to work. hahah. once i get back from england i'm hoping to wrap up the steering, trans hookups (OD and TC) along with shocks and wiring. stay posted.. and keep shooting ideas at me for emblems.

cheerio!

EL TATE · « **Reply #567 on:** October 21, 2016, 06:01:57 PM »

Tom McIntyre at Acsco. There company has made several custom emblems for SEMA builds, and are in CA. 818-953-2247 is his direct line. Tell him Tate at Yukon Gear & Axle recommended him. They can do CAD examples, one offs, you name it. http://www.acsco.net/emblem/inner/Productsemblem.shtml

swbhobie16 · « **Reply #568 on:** October 21, 2016, 06:29:36 PM »

Quote from: EL TATE on October 21, 2016, 06:01:57 PM

Tom McIntyre at Acsco. There company has made several custom emblems for SEMA builds, and are in CA. 818-953-2247 is his direct line. Tell him Tate at Yukon Gear & Axle recommended him. They can do CAD examples, one offs, you name it. http://www.acsco.net/emblem/inner/Productsemblem.shtml

that sounds great man. thanks a lot! i'll let you know what he says when i get in touch with him. my dream is to have something someday good enough for a SEMA booth.. but everyone knows that's like making it on the starting 9 in the big leagues.

one day.. who knows

again.. i appreciate it.

TexasRedNeck · « **Reply #569 on:** October 21, 2016, 08:50:15 PM »

37x13.5x20 are more than $500 each. I sold my set with 60% on one pair and nearly 80% on the other for $950

Sent from my iPhone using Tapatalk

Bigdave_185 · « **Reply #570 on:** October 22, 2016, 09:12:35 AM »

Quote from: Flyin6 on October 21, 2016, 11:34:27 AM

Not even a cool decal for improved aerodynamics???

Don wants racing stripes I think

Sent from my iPhone using Tapatalk

Flyin6 · « **Reply #571 on:** October 22, 2016, 12:20:18 PM »

Quote from: Bigdave_185 on October 22, 2016, 09:12:35 AM

Quote from: Flyin6 on October 21, 2016, 11:34:27 AM
Not even a cool decal for improved aerodynamics???
Don wants racing stripes I think

Sent from my iPhone using Tapatalk

Like my fav car, the 70' SS 454 Chevelle?
Like those?
I could see it...

Well, not really

swbhobie16 · « **Reply #572 on:** October 22, 2016, 04:01:26 PM »

Quote from: Flyin6 on October 22, 2016, 12:20:18 PM

Quote from: Bigdave_185 on October 22, 2016, 09:12:35 AM
Quote from: Flyin6 on October 21, 2016, 11:34:27 AM
Not even a cool decal for improved aerodynamics???
Don wants racing stripes I think

Sent from my iPhone using Tapatalk

Like my fav car, the 70' SS 454 Chevelle?
Like those?
I could see it...

Well, not really

hahah. i mean.. maybe.

i doubt this thing will ever see 80mph.. let alone need racing strips to be 'cool' lol

speaking of '70 chevelle though.. i am currently helping put together one.. blue with black racing stripes. built 408 motor. TH400 trans. resto interior..

i'll get some pics when it's more complete.

EL TATE · « **Reply #573 on:** October 26, 2016, 11:16:05 AM »

For SEMA, all you really need to do is talk to one of the vendors of the diesel products you have on the motor. Your build is SEMA quality thus far, and I've been every year since 2008, so I have a good perspective. it's the details.

swbhobie16 · « **Reply #574 on:** October 26, 2016, 04:18:29 PM »

Quote from: EL TATE on October 26, 2016, 11:16:05 AM

For SEMA, all you really need to do is talk to one of the vendors of the diesel products you have on the motor. Your build is SEMA quality thus far, and I've been every year since 2008, so I have a good perspective. it's the details.

dang man.. that means a lot. like.. a whole lot. never thought i'd ever get there. it's reassuring to know that it's there. always been a dream to go at some point. and that's just the assurance i needed.

thanks

now.. to get back to the states and finish the 715! hahah

KensAuto · « **Reply #575 on:** October 26, 2016, 09:00:37 PM »

Tate knows.
If you've seen some of the stuff that is shown there, you wouldn't think twice about trying...all it takes is an "In".
...or a bag of money.
For example, there's a shop here in my little city, which has a less than stellar rep, and he's building a 70ish chevy truck, and it's sponsored by PPG paints. That's his "IN". I haven't seen it myself, but I guarantee it's not half as nice as your 715. Guaranteed!

stlaser · « **Reply #576 on:** October 26, 2016, 09:27:40 PM »

Buddy of mine a few years back was telling me about this rock crawler build with 4 link tabs just tack welded in place. Actually a heart surgeon we both knew had bought it this way from sema floor, yes more money than sense....

EL TATE · « **Reply #577 on:** October 27, 2016, 12:13:57 PM »

Yup. There are some gems and some turds. yours would be the gem variety

swbhobie16 · « **Reply #578 on:** October 27, 2016, 06:44:23 PM »

i had no idea. i really appreciate the kind words and votes of confidence. it really would be a dream come true to be there. maybe not with this truck (as cool as it would be) but one of the next. i guess i just need to put some feelers out there and/or change some parts on the cummins. hahah.

y'all really don't know what this means.. just to hear it from someone. gratifying and humbling..

stlaser · « **Reply #579 on:** October 27, 2016, 06:56:33 PM »

Quote from: swbhobie16 on October 27, 2016, 06:44:23 PM

i had no idea. i really appreciate the kind words and votes of confidence. it really would be a dream come true to be there. maybe not with this truck (as cool as it would be) but one of the next. i guess i just need to put some feelers out there and/or change some parts on the cummins. hahah.

y'all really don't know what this means.. just to hear it from someone. gratifying and humbling..

For the record, from someone on the product supply side for after market. If you're going to go to the trouble of getting it to SEMA let the vendors help pay for your next build. You can use this build as a show case of past work and get a lot of money and or parts thrown your way. You will have to commit to a timeline and your intent up front but guys who manufacture parts will gladly help you out. Just my 2 cents

EL TATE · « **Reply #580 on:** November 02, 2016, 04:43:07 PM »

These are true statements. Anything built and showcased on this forum for example as well.

stlaser · « **Reply #581 on:** November 02, 2016, 05:10:27 PM »

Quote from: EL TATE on November 02, 2016, 04:43:07 PM

These are true statements. Anything built and showcased on this forum for example as well.

Except SQ D, that build turned into a rolling parts bin...... ::)

JR · « **Reply #582 on:** November 02, 2016, 05:51:07 PM »

Quote from: stlaser on November 02, 2016, 05:10:27 PM

Except SQ D, that build turned into a rolling parts bin...... ::)

Well, he did use a lot of parts from many companys. Maybe all of them!

Sammconn · « **Reply #583 on:** November 02, 2016, 05:58:46 PM »

Quote from: stlaser on November 02, 2016, 05:10:27 PM

Quote from: EL TATE on November 02, 2016, 04:43:07 PM
These are true statements. Anything built and showcased on this forum for example as well.

Except SQ D, that build turned into a rolling parts bin...... ::)

Shawn, I think you're going to get fired again!

Flyin6 · « **Reply #584 on:** November 02, 2016, 07:04:49 PM »

Yea, he's on the border (again)

Square D is alive and fine. I'll get back on it, but have more pressing things at the moment (Meaning: the past year!) ???

stlaser · « **Reply #585 on:** November 02, 2016, 07:05:16 PM »

Quote from: Sammconn on November 02, 2016, 05:58:46 PM

Quote from: stlaser on November 02, 2016, 05:10:27 PM
Quote from: EL TATE on November 02, 2016, 04:43:07 PM
These are true statements. Anything built and showcased on this forum for example as well.

Except SQ D, that build turned into a rolling parts bin...... ::)
Shawn, I think you're going to get fired again!

Was I rehired after the last incident? Can't recall & I won't ask Don because he had that traumatic injury in front of the family n all so I'm sure he's lost track when you figure that and his age..... ;D

swbhobie16 · « **Reply #586 on:** November 02, 2016, 07:12:27 PM »

been working on the truck alittle lately. i'll get some pics up tmrw once it all gets placed. mostly little things. accessories. rear view mirrors. good larches. etc. and some cool jumper cable plates. pics and explanation mañana hahaha

swbhobie16 · « **Reply #587 on:** November 03, 2016, 09:45:15 PM »

alittle hoodlatch update

KISS

.. regular looking hole in the hood

but wait..

TAADAAA

exterior hood latches

block off plates and jumper cable connections

some LED headlight/turn signals

and a close up. bear in mind that they still have the plastic film on them. the smaller 3/4" holes will either be amber running lights or white hazard strobe lights.

Bigdave_185 · « **Reply #588 on:** November 03, 2016, 11:16:05 PM »

Looks great

Sent from my iPhone using Tapatalk

KensAuto · « **Reply #589 on:** November 04, 2016, 11:12:45 AM »

Anyone else having issues with seeing the pics?

EL TATE · « **Reply #590 on:** November 04, 2016, 12:08:06 PM »

yup. nothing cool to look at for me.

JR · « **Reply #591 on:** November 04, 2016, 12:10:23 PM »

What happen,,,,,,,,,,,,,,,

Bigdave_185 · « **Reply #592 on:** November 04, 2016, 12:21:02 PM »

I see it ha ha

Sent from my iPhone using Tapatalk

Sammconn · « **Reply #593 on:** November 04, 2016, 01:12:30 PM »

I had them last night but now just boxes.

It looks great once they turn up again!

Edit. Just noticed a bunch of mine are MIA too.
I'm thinking photobucket is having issues, I checked mine and was getting a connection error, no internet connection etc type messages.

swbhobie16 · « **Reply #594 on:** November 05, 2016, 08:51:21 AM »

yea.. i got a message like that when i opened up my photobucket earlier. not sure what's happening. hang in there with me, maybe it'll come back. hahah

swbhobie16 · « **Reply #595 on:** November 05, 2016, 10:17:53 AM »

most recent.. with the light bar, hood light and headlights (none of it hooked up.. yet)

BobbyB · « **Reply #596 on:** November 05, 2016, 01:10:23 PM »

Quote from: swbhobie16 on November 05, 2016, 10:17:53 AM

most recent.. with the light bar, hood light and headlights (none of it hooked up.. yet)

That looks like a good wallpaper image.

Sammconn · « **Reply #597 on:** November 05, 2016, 01:17:34 PM »

Looking great!

swbhobie16 · « **Reply #598 on:** November 05, 2016, 03:07:22 PM »

Quote from: BobbyB on November 05, 2016, 01:10:23 PM

Quote from: swbhobie16 on November 05, 2016, 10:17:53 AM
most recent.. with the light bar, hood light and headlights (none of it hooked up.. yet)

That looks like a good wallpaper image.

wait until the brush guard is back on and we have a new set of 37" HUMVEE tires w/spacers on the back.. :( hahah

but thank you. it's getting there. slowly but surely

BobbyB · « **Reply #599 on:** November 05, 2016, 03:21:51 PM »

Quote from: swbhobie16 on November 05, 2016, 03:07:22 PM

wait until the brush guard is back on and we have a new set of 37" HUMVEE tires w/spacers on the back.. :( hahah

but thank you. it's getting there. slowly but surely

I like the tires that are on it. But regardless it looks good. Can't wait to see the end result.