0 Members and 0 Guests are viewing this topic.
It’s the ‘tuck... he’s probably rolling around on the lawn mower.Sent from my iPhone using Tapatalk
I like that ^^^^^^
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.
I got the internal transmission harness in today from "Dirty Hooker Diesel" in MI.Planning to install it today, I took off in the truck to pick up the requisite 3 gallons of Dexi VI.I didn't get very far, like two miles when it dropped into limp mode. Trans was shifting perfectly, no slipping, and trans temp remained very low at 124FSo. plan B is to have the wife pick up some fluid on her way home from work. But, we have a football game to attend tonight and another 70 miles away tomorrow (Read: half a day or more). So Not too sure when I can get to it.Codes this time:P0700 something wrong with transmissionP0708 TCM or related problem such as wiringP0673 #3 glow plugP150C - Transmission Control Module Engine Speed Request Signal Message Counter Incorrect 0 Comments | Add Comment Possible causes Faulty Transmission Control Module (TCM) Transmission Control Module (TCM) harness is open or shorted Transmission Control Module (TCM) circuit poor electrical connection
so what is the exact fluid required for the allison 1000s? i saw you said dex VI but i thought it was trans synd? the actual allison fluid..?
...will nearly constitute a complete fluid change.
I still say TCM. Thousands of trucks with 20 plus years on the same wiring harness. Sent from my iPhone using Tapatalk
Don. Friendly wager?If it’s not the TCM I’ll donate $100 to the RMTW website fund If it is...I’ll buy the steaks at the fall get together at the farm. Sent from my iPhone using Tapatalk
Quote from: TexasRedNeck on August 17, 2019, 08:12:04 PMDon. Friendly wager?If it’s not the TCM I’ll donate $100 to the RMTW website fund If it is...I’ll buy the steaks at the fall get together at the farm. Sent from my iPhone using TapatalkHeck of a wager! What is this fall get together you speak of? We’re headed that direction-ish next month.
Sounds like fun. What do we get to run over when operating said machinery? Do we need to bring our own cameras and chainsaws?Sent from my iPhone using Tapatalk
Don, not questioning your ability, but you sure you got that main connector snapped all the way together? Weird you would end up with that many codes after the repair, unless you have a bad wire in the area of the connection. I would pull on each wire to see if any feel stretchy.
New harness, same codes seems to point to the TCM or another harness.