Hello Guest

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - JR

Pages: 1 ... 134 135 [136] 137 138 ... 271
6751
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: October 27, 2018, 12:36:00 PM »
There is room for machines in that place Shawn?

Problem Don, or just dreading the down time?

6752
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 26, 2018, 11:00:07 PM »
Washed it a little, drove it down the street. Feels really good, shifts good. Rear is a little high but still jazzed.

6753
Hide Site / Re: Hide Site/Bug Out Location Construction, Part 6
« on: October 26, 2018, 10:45:59 PM »
He could break that too,,,,,,,,,,,,

6754
Build Threads / Re: The Bus
« on: October 26, 2018, 10:36:48 PM »
Sounds you actually got off easy. I still don't have dash lights.

6755
Hide Site / Re: Hide Site/Bug Out Location Construction, Part 6
« on: October 26, 2018, 07:03:10 PM »
Maybe they will give you enough for the JD for a another quad

6756
Hide Site / Re: Hide Site/Bug Out Location Construction, Part 6
« on: October 26, 2018, 06:37:02 PM »
You need more equip it looks to me and some lights!

Looks like the muts get along good.

6757
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 26, 2018, 03:22:51 PM »
The tank was from 1A Auto and would use them again. Took 3 days to get the tank via amazon from Kansas.

Used #30 felt for the padding and adding the tank opening is a no brainer. Made it so easy to hook up, should be standard! The motorcycle jack made it easier too once the neck was in.

Going to seal it up with a little silicon and call it a day.

6758
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 26, 2018, 03:07:17 PM »
Funny, I DL the clip and hear it fine. (I did compress to keep the boss happy with a small file)

6759
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 26, 2018, 02:14:28 PM »
Had a little lifter noise at first, but after 14 years I wasn't surprised. I can hear it, any others?

Ran through the gears and it seems to grab good, but haven't actually driven it.

Love to have it gone by the end of the week.

6760
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 26, 2018, 05:23:51 AM »
Well, at 0129 this happened;

6761
Faith Discussion / Re: Prayer Request thread
« on: October 25, 2018, 03:35:26 PM »
Of course, more sent and more to continue. No need to stop praying for those here, lost and remembered.

6762
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 25, 2018, 02:17:47 AM »
Pump got here today, tank will be here tomorrow. With that I figured finishing off the hatch is in order.

Cleaned the edges up, cut some tabs, drilled holes and spot welded the tabs on. Cleaned up and painted. I will do a "how to" thread on this in the Spartan thread.

Cleaned up lots of wiring, tied up more and pulled out more! You should see the box now! Still 1 crossover to get under the dash behind the radio.

Both rear windows work, power to the fronts so both will get new motors.

6763
Coffee Induced Early Morning Rant / Re: “Refugees” from south america
« on: October 24, 2018, 03:32:55 PM »
Would answer a lot of questions.

6764
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: October 24, 2018, 01:47:03 AM »
To bad you don't have one deep enough not to freeze. Trout would be sweet if there was enough flow to keep the water cool in summer.

6765
He is not going to let them in. In any event it is months away with a hurricane or two before they get near.

Soldiers won't have to man the border, we citizens are fed up and will stand guard whether we have the 1st Cav or not.

I would!!

6766
I really hope he stands up and does not allow any of this hoard to pass. If he does it will get worse.

Lets put the military on the border and stop the invasion!

6767
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 23, 2018, 11:23:30 AM »
They are getting more common for sure.

Good enough, one misspelling. Would like to have it myself...but with squareD I'd likely not survive the critics!

Heck with 3 row seating that would be great out there and it runs,,,,,,,,,,,,,,

6768
Coffee Induced Early Morning Rant / Re: “Refugees” from south america
« on: October 23, 2018, 11:07:13 AM »
They don't have the right, and maybe now with a better balanced SC that may become the standing rule (post hurricane).

6769
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: October 23, 2018, 11:04:24 AM »
Yep, those stones are a god send, pun intended!


6770
Build Threads / Re: 89 K1500 Refresh
« on: October 23, 2018, 10:58:24 AM »
That is a nice truck and price. Just be sure the injectors have been done or get a warranty for that.

6771
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: October 23, 2018, 01:48:52 AM »
I like the wall, hope you don't run out of stones!

Just 1 question, where is the boat ramp  :grin:

6772
Hide Site / Re: Hide site, retirement site.
« on: October 23, 2018, 01:43:11 AM »
That might be worth the drive!!

6773
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 23, 2018, 01:28:44 AM »
Thx, have seen them go for a lot more, but I want to move it and it needs paint.

With this and the old add I have 3 parties looking. Bumped it from 2500 to 3000 with all the new stuff.

Clean up the interior this week while waiting for another tank/pump. Went to fast and got the 31 vs the 40.

When running will turn around, change the front studs to 14mm and add locking hubs. Then paint the hood black and address the rusty roof if still here.

6774
Firearms / Re: Fantastic Deal!
« on: October 22, 2018, 03:38:54 PM »
 :likebutton:

6775
Coffee Induced Early Morning Rant / Re: “Refugees” from south america
« on: October 22, 2018, 03:30:19 PM »
Up to 10k today, who is paying for this?

Did you know they cannot ask for political asylum in the US? For political asylum it has to be the first country you get into, not where you want to go.

Not meaning any harm, but the hurricane may fix some of this.

6776
Hide Site / Re: Hide Site/Bug-out location Construction, Part 5
« on: October 22, 2018, 03:26:37 PM »
Have to agree, but who called Don old?

6778
Powerplant, Driveline, and Braking / Re: 2003 Ram 2500 front diff
« on: October 22, 2018, 02:34:13 PM »
Just need some spikes sticking out!

6779
Hide Site / Re: Hide site, retirement site.
« on: October 21, 2018, 10:23:37 PM »

6780
Hide Site / Re: Hide site, retirement site.
« on: October 21, 2018, 10:13:08 PM »
You gunna live there?

6781
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 21, 2018, 10:10:48 PM »
Got back from camp today, what a mess it was. Now camp was great, but parking was in single lines and I was like 2 miles out. So after gear was dropped had to go back and get a few little things.

On the building side, I dropped the tank after getting home. Now trying to scape the insulation crud off for reuse.

6782
Faith Discussion / Re: Prayer Request thread
« on: October 21, 2018, 10:07:13 PM »
Sorry to hear that.

6783
Build Threads / Re: Ramcharger Build
« on: October 21, 2018, 09:27:08 PM »
My point was JR it seems the Japanese incorporated this feature into the mainstream on most of their engine designs.

Oh, I knew where you were going. If a mouse trap works, speaking of, Don??

6784
Build Threads / Re: Ramcharger Build
« on: October 21, 2018, 12:02:55 AM »
So they used isuzu tech, if it works, it work.

6785
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: October 20, 2018, 07:54:19 PM »
Speaking of scouts,at an expo on Beale AFB.

6786
D.O.T. / Re: WDYDT (What Did You Do Today)
« on: October 19, 2018, 12:50:22 PM »
$$$$$

6788
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 19, 2018, 12:44:07 PM »
This is service. Ordered yesterday around 1600, changed the order about 10 minutes later and here it is today at 9:19.

To bad I can't get to it until next week :undecided:

6789
Real Man Knowledge base / Re: 911 assistance
« on: October 19, 2018, 12:38:14 PM »
I think Ken is still hoping H runs in 2020..... :tongue:

Well, that would be an emergency!!

6790
Build Threads / Re: Ramcharger Build
« on: October 19, 2018, 12:36:11 PM »
Duramaxs have, but are long bolt in things.

6791
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 19, 2018, 12:42:29 AM »
Alright. Nice fun there. Stop making fun of my ostrich loafers.

Wait until I put the grizzly locker in the LB7. It’s still a real truck.


I like ostrich, for my boots. Heck, swelling is down enough I may just get a pair!

Not sure of my rear yet for the LBZ, but the front is getting a truetrac.

Now I have to up the price on this, just dropped another few hundred into it.

6792
Faith Discussion / Re: Prayer Request thread
« on: October 19, 2018, 12:24:30 AM »
Samm, Prayers sent, hope it goes as well as it can.

Shawn, glad to hear she is doing OK, take a few more boxes upstairs for her,,,,,,,,,

6793
Build Threads / Re: Ramcharger Build
« on: October 18, 2018, 07:57:43 PM »
Wondered where they went. So constant oil from the mains.

6794
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 18, 2018, 07:53:10 PM »
So after looking at the pump assembly and the tank after draining I decided to just replace both. The rust and gunk was nasty, so dropping it anyway now  :facepalm:

Summit had pumps for $87 ($67 for the 40 gal?) and a dorman 31 gal tank was $107. It was $122 but when I checked to see if the tank was baffled, it showed a diff tank. So I called to change the order and they matched Amazon and gave me free shipping (normally $10 oversize).

All in stock in Reno so will have tomorrow, but another scout event this weekend so will tackle on Monday.

6795
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 18, 2018, 07:43:42 PM »
Well, Charles sold the real truck anyway,,,,,,,,,,,,,,,,,,,,

6796
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 18, 2018, 07:19:36 PM »
Anyway  :rolleyes: I cut the hole, disconnected the wires and got her open. Hole could have a been a little bigger, but it worked (8x8).

Parts were falling off and the pump hose had rotted away. With the condition, the R&R is not worth the time.

Drained another 5-6 gallons of something from the tank using the pump I got for the boat, worked great!

6797
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 18, 2018, 07:13:26 PM »
hopefully its out of the DMV system by now! 


Been no-opped since I had it no issue there.

I lock hubs when I get to the area, not when I get stuck,,,,,,,,,,,,,,,,

6798
Build Threads / Re: Ramcharger Build
« on: October 18, 2018, 05:00:33 PM »
 :likebutton:

6799
Build Threads / Re: 1991 Suburban Build for a flip. Former 6BT candidate.
« on: October 18, 2018, 01:12:33 PM »
Fuel I drained was pretty bad, just real dark. I am not even sure how long it has been sitting. I have had it for 4 years and the last reg tag is 2005.

Cutting the top open today and will see for sure. Got 10 gal fresh gas and a couple filters.

6800
What are you building? / Re: Dave’s house
« on: October 18, 2018, 12:56:14 PM »
I think JR is referencing the steps coming down into the front porch from the sidewalk?

Yep

Pages: 1 ... 134 135 [136] 137 138 ... 271
SimplePortal 2.3.6 © 2008-2014, SimplePortal