0 Members and 1 Guest are viewing this topic.
OK, so who can get auto paint (enamel or acrylic) matched to a part I have for the Burb?Want single stage, just touching up some stuff before it gets the whole treatment (might be awhile)I found some place in NV, but they want $90 a quart!(yes this is a double post)
Where's the pic of the dually carnage?
Pain to unload on a slanted driveway. Looks pretty good, will check the specs.
Pulled the cover and verified the 4.10 ratio. Was very clean inside. This had concerned me as the vent was open and pointed up when I got it. Play seems to be in the spiders so far. Left pad shows a repair on the inside weld and the spring hole is elongated. I also need to make a spacer for the springs. The GM 60 is made for 3in springs, mine are 2.5.
Quote from: JR on August 03, 2020, 10:43:43 PMPulled the cover and verified the 4.10 ratio. Was very clean inside. This had concerned me as the vent was open and pointed up when I got it. Play seems to be in the spiders so far. Left pad shows a repair on the inside weld and the spring hole is elongated. I also need to make a spacer for the springs. The GM 60 is made for 3in springs, mine are 2.5.Looks horrible, send it to me and I’ll dispose of it properly for you.
Hmm, guess I'm on my own for this part.Since I have 3 setups going I got one of these puller/press setups. Yukon was over $500, this was $200 shipped. Quality looks good, now to try it out.
Is that the spreader? Never used one before.
My plan now is for the Dmax, newly lifted, running 37s with the posi rear. It is a solid rig.As time allows I am getting the Sub going. Solid rig but still need to shove the truetrac axles under it. Sleeping is no issue. I have tents, heaters and a cot and air mattress. My bones don't like the ground anymore.Half of the parts I just grabbed are extra, big thing was the serp system.
JR, assuming this is trans trail duty?
Quote from: stlaser on March 29, 2021, 10:17:32 PMJR, assuming this is trans trail duty? Lots to do before I get to that point. First I am making sure a couple things are finished on the Dmax, then all out on the Burb.Buy the way, not posted in that thread but my son and I are in for the trip.
Well, I wasn't going to buy that from you JR, but now I may have to!
These are the DIY 2004s. They are $8. Other sets I'm finding are $20. What number/manf do you get?