This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JR
Pages: 1 ... 126 127 [128] 129 130 ... 270
6351
« on: January 08, 2019, 10:44:14 PM »
Yep, you have it off and they do have HD chains.
6352
« on: January 08, 2019, 08:02:07 PM »
I had to pull the rad, condenser and cut the rad support open on spartan
6353
« on: January 08, 2019, 07:47:24 PM »
Playing with my EFI now. Can't get several tunes I like much less stand alone V2 use.
6354
« on: January 08, 2019, 10:52:27 AM »
Sounds like a nice drive, hitting a few parks too?
Nebraska, doesn't some OLD guy live out there?
6355
« on: January 07, 2019, 11:49:40 PM »
Ryan, that 44k one looks nice. 226 on the other!!  Sounds like a good plan so far. If you go wheels, because you want wider for sure, you could still do 17's and clear with a 3 inch lift (really just a level kit). I probably went backwards with my intake, but I have a clearance issue with the elky hood. I now have an LS intake vs the truck 5.3 and a CTS pan. Bumpers sound cool, can't wait to see em. What is you planned route for the trip?
6356
« on: January 07, 2019, 07:55:03 PM »
We spent really little time there. Road bikes in the AM, skiing when hot, drinking and pool at night, seemed the border patrol liked to chase me, never caught me.
6358
« on: January 07, 2019, 10:59:23 AM »
I made my own set for the elky about 20 years ago. 1in is all, billet and had some crazy weight back there (cummins). Knock, knock.
6359
« on: January 07, 2019, 10:47:47 AM »
Reminds me of Glamis and Pismo.
6360
« on: January 07, 2019, 10:44:16 AM »
Watches were getting to be a big thing at work when I left (BIG), I just use my phone.
I do like knowing altitude though, don't know why.
6361
« on: January 07, 2019, 03:13:41 AM »
How many refugees would that feed!!
6362
« on: January 07, 2019, 03:10:19 AM »
Might improve the looks of it too,,,,,,,,,,,
6363
« on: January 06, 2019, 08:01:57 PM »
I think your slides are fine Don. Just worried about the drawer bottoms not holding up. Did you try yours with the Dog 
6364
« on: January 06, 2019, 05:51:53 PM »
I liked the sliders and spacers. All the weight is on the sliders. Latches were a bit busy for me.
6365
« on: January 06, 2019, 03:41:46 PM »
https://www.amazon.com/dp/B00DLA4AQQ/ref=cm_sw_r_cp_api_i_7yumCbG6FNRGB
What does the think tank think of this idea ? Want to. Open up my options for used market of wheels/tires
I really like that 2012 Chevy wheel too
Sent from my iPhone using Tapatalk
Sure it changes pattern but adds BS. I hate the new small tire sticking way out look. Be sure they are billet at least. Most wheels are cast so the spacer is stronger than the wheel. Doing that on my burb. H1 wheels are 7 BS so I will run a 2.5 spacer to keep the 4.5 BS most of us have now. May go a little more since I like the tire flush in the rear.
6366
« on: January 05, 2019, 11:58:26 PM »
Also this should be done in the summer when you can enjoy being in the attic
I did! Nice grouping there. 7 or 10 yards?
6367
« on: January 05, 2019, 03:21:44 PM »
Well, the All On mod was just a loose 1/4 plug.
I cleaned the OEM housings and it is better, but not great. So I got a OEM style set but cheap so we'll see.
I did get the JDM NX high beams and WOW, worth every penny. Very happy, $70 well spent.
Found one of my fog light adjuster was messed up. Screw came out of housing so it could float, easy fix. Ordered cheap LED bulbs for them, stock are just 37watts, ouch.
6368
« on: January 05, 2019, 03:04:06 PM »
We did my moms walls and the attic. She fed, I crawled, worked good. Attic was easy once you were up there, walls had no blocks but you should have seen the holes for just a 900sf house!
6369
« on: January 04, 2019, 11:53:53 PM »
That far in, replace them both.
6370
« on: January 04, 2019, 09:13:10 PM »
I did that about 20 bags awhile back, wall and attic. It was not fun but not hard.
Show us more Dave, I need to do that too.
6371
« on: January 04, 2019, 02:08:12 PM »
Hey, he even used a nut to protect the threads!
What HB don't you need a puller for?
6372
« on: January 03, 2019, 10:54:08 PM »
House full of kids on vacation, its quiet.
6373
« on: January 03, 2019, 10:24:53 PM »
I hate HOAs too and have beat them.
My shop has an HOA too!
And no bathroom,,,,,,,,,,,
6374
« on: January 03, 2019, 06:21:23 PM »
I hate HOAs too and have beat them.
6375
« on: January 03, 2019, 06:16:31 PM »
I think "watching" people who can't drive in the snow is great, just don't want to be too close.
6376
« on: January 02, 2019, 08:30:32 PM »
I remember those areas on the side from my old 96, pretty much the same.
Very nice fit and work by the way. The pass side will have lots of AC stuff under there, the drivers not so much.
Think there is a factory cover for all that too.
Nice spot for a shotgun behind the rear seat,,,,,,,,,,,,,,,
6377
« on: January 02, 2019, 05:57:46 PM »
So, sure many are thinking this.
Cost for a bumper kit shipped.
Cost for file to cut local or excuse for a table!
6378
« on: January 02, 2019, 05:44:58 PM »
Water table should be good if I don't have water. I am seeing wells (USGS) at up to 200ft, but many are under 100, some at 25. But another bargaining chip for sure.
I was seeing 1500-2000 for a 120-150 footer with a quick search. Sure that is without pump and all the rest.
6379
« on: January 02, 2019, 05:25:22 PM »
Hold your phone upright!!!!!!! 
6380
« on: January 02, 2019, 05:21:18 PM »
Honest people with level thinking know they are crooks. Most of the "crimes" don't even require "intent", just doing them is enough.
I fear for my kids and hopefully grandkids to come.
6381
« on: January 02, 2019, 05:18:10 PM »
Hey Ed, welcome aboard, do you know the Old Man?
6382
« on: January 02, 2019, 04:04:59 PM »
I like that! Have you done any square bodies? EI, mid 80's like my burb?
6383
« on: January 02, 2019, 02:55:16 PM »
Well, as long as the doors are closed he should be fine though. Plus with things hidden, why break in?
What about Teflon tape on the slides if they are stiff? I found some on ebay pretty easy.
6384
« on: January 02, 2019, 02:47:19 PM »
Having power nearby is definitely something I would like. Well or water is a big plus, just have to see. Trees and a stream would be nice. It's there, but pretty $$.
I like the idea of rolling land maybe against hills/ mountains. I doubt I will get a thing like Don has but like it.
What does a well run if from scratch? I have see props with a well casing listed which I take it is not being used or dried up.
6385
« on: January 02, 2019, 02:32:52 PM »
And you can customize it like a real man!
6386
« on: January 02, 2019, 02:31:43 PM »
Just get it covered under your insurance (that's why you pay for it) and be done with it. Then let the companies battle it out. Not your fault so no points or rate hikes.
I understand its not what you want to do, but is it worth the bother?
6387
« on: January 02, 2019, 03:25:24 AM »
And she got a soft top?
When I go to LA, I always watch wear I am and park. I even hate Sac.
6388
« on: January 01, 2019, 11:54:41 PM »
Well, I added the JDM NX LED bulbs to my Dmax and so far I really like them. In fact I just ordered the same bulbs for the high beams.
Now 2 setbacks, my "all on" stopped working when I put in the LEDs?? Maybe the relay, just haven't checked. What is the mod with the diode for all on again in the fusebox? That or the pc board.
Still in the stock housings too. Is there something better or stock housings the beast??
6389
« on: January 01, 2019, 11:46:04 PM »
I need to keep up on that better. Just ran my big gen and was a bare to get going. Does the marine additive help with the ethanol?
6390
« on: January 01, 2019, 10:53:56 PM »
Doesn't Bear make custom bumpers?
6391
« on: January 01, 2019, 10:40:03 PM »
May as well get going on this as so much is flying through my skull I need more to muddy it up. I have been thinking of some land for some time now and now it should come to pass.
Looking at getting 20+ acres (hopefully more) OOS (out of state). This may or may not turn into a permanente residence depending on,,,,,,,,,,,,,,,,,
Want it backed/sided to open/blm land so as not surrounded and no HOAs with easy to handle building regs. I am looking south of the Reno area, which allows decent access from several highways in about 3 hours. I budget in mind, but a little flexible depending on the parcel. I do not want a plod of dirt in the middle of more dirt!
Not really worried about power/water or structures for now, the right property is the thing first. I already have ideas for storage (shipping cont) and living (24ft TH). Tractor and HD trailer for sure
6392
« on: January 01, 2019, 07:01:26 PM »
I do carry one, get them on ebay for $50, new. I also carry upper ball joints.
The real hard ones are the brake brackets (long arse breaker bar!)and hub bolts (6pt 15mm?). I can do in an hour at home.
6393
« on: January 01, 2019, 06:58:08 PM »
Have a couple places with in an hours drive with it. Does it cost more than regular fuel?
6394
« on: January 01, 2019, 04:17:12 PM »
So how do they fit and what locks/latches?
I like the trialready a little more. ARB you are paying for the name. Price diff?
I agree on the hubs too, if tight, why bother.
6395
« on: January 01, 2019, 04:11:21 PM »
That looks pretty good.
6396
« on: January 01, 2019, 01:09:34 AM »
Test fit yet or just the bases?
6397
« on: January 01, 2019, 01:08:56 AM »
6398
« on: December 31, 2018, 01:38:02 PM »
Put some good bumpers on it fast!
6399
« on: December 31, 2018, 01:36:15 PM »
Looks like a lot of machines to chose from, but is a fully auto needed? For what they really use a good set of saws and a splitter is all he really needs.
He has the labor on site,,,,,,,,,
6400
« on: December 30, 2018, 10:16:37 PM »
Dang those look good. I was going to BBQ tonite and just plain forgot!
Pages: 1 ... 126 127 [128] 129 130 ... 270
|
Show Posts
