REAL MAN TRUCKWORKS & SURVIVAL

VEHICLES, CAMPERS, and BOATS => Powerplant, Driveline, and Braking => Topic started by: JR on January 20, 2015, 01:09:46 AM

Title: 8 Lug hubs for a Dana 60??
Post by: JR on January 20, 2015, 01:09:46 AM

OK, so I have a dana 60 with the external LARGE hubs with Seletro hubs. This is called an external hub from my research. Flares out from the WMS to the locking hubs.

I also have a GM corp 10 bolt with the large 8 lug hubs and wondering if they will swap over to the dana 60? EI; Are they like the GM Dana 60 with the 8x6.5 hub or is the 10 bolt smaller?

Title: Re: 8 Lug hubs for a Dana 60??
Post by: Flyin6 on January 20, 2015, 09:08:34 AM

^^^^ Tate??

Title: Re: 8 Lug hubs for a Dana 60??
Post by: EL TATE on January 20, 2015, 10:20:54 AM

That's a negative. The 8.5 lrg hub is technically the same as the D44. spindles are too small. externally the hubs are similar but that's where it stops. what you can do is swap a GM Dana 60 8 lug hub from 77-91, or any Dodge D60 hub from 75-93 with internal type locking hubs. (flanged hubs won't swap). You can, however, sell those Selectros online and make a few hundred bucks. I get calls regularly for replacement parts for those and they've been off the market for years.