0 Members and 3 Guests are viewing this topic.
Heading out in the morning to pickup. About 30 away in Grass Valley I found an almost new 24in bucket Kubota quick attach coupler combo. Hopefully is it close, I can make spacers if needed. The ears for this coupler are well under $100 and weld flat onto about anything. Not an auto/hydro coupler, but I just want to change buckets if needed fairly easy. Needs right now are a 24, 12 and 36/48 dirt bucket. Pretty easy to find out there.Really had issues with states "biggest" credit union I didn't give them enough notice to get 17k in cash and check clearing issues too!
Jr where are we lookin for the crack? Sent from my iPhone using Tapatalk
Quote from: Bigdave_185 on March 10, 2022, 02:08:15 PMJr where are we lookin for the crack? Sent from my iPhone using TapatalkThe rust line just above the weld for the ram mount. Local shop has a gouger that will open it up clean, then do the overhead weld on it.If it was torn down, I would not hesitate to do it and grind it out by hand. But if you have ever seen someone use a arc gouger, that is the way to go. (see ICWELD on YT)