VEHICLES, CAMPERS, and BOATS > Build Threads
SquareD Part 6 Bumpers, Winches, wiring, lights, assembly
Flyin6:
With that snugged down, the first louver panef was screwed down
Now I'm really undecided here. I elected to just go OD green with everything, but that thing is screaming to become semi-gloss black
Flyin6:
Back in Part 5 Norm and I were discussing the tire to fender clearance. I had decided to trim it up some to gain clearance. I started out working with a couple fat fingers of clearance
Flyin6:
Using the bottom of the marker light as a reference I selected some 2" masking tape to serve as a guide. I made the cut on the bottom edge
Flyin6:
Which vastly improved clearance from that axle which now lives about 1.5" further forward than the stocker did
Flyin6:
Starting to look like a truck again. Things are lining up somewhat. Not perfect, but "roughed-in" certainly
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version