0 Members and 1 Guest are viewing this topic.
So, Bobby...being the calculating trained warrior NCO that you are. Take the appropriate action, Execute!
your standard grunt level CQB is just putting rounds and rounds on scary stuff till it stops scaring you!
LongD, RamD, DQ.....did someone say Ice Cream? :o
Here's a quick picture. Got er for 3900!
Truck like that up here would have an asking price around $8-10,000 or more.
I concur. I have been keeping my eyes on craigslist for a while and there hasn't been anything for a decent price recently.
I just don't want to wind up missing a digit or limb. I can sometimes get in a hurry to get results.
You stole it. That is what they want motors for now around here!
Quote from: moto123 on November 05, 2015, 01:13:20 PMI concur. I have been keeping my eyes on craigslist for a while and there hasn't been anything for a decent price recently.There was a 2500 of the 04-06 vintage on CL up here, manual, quad cab, short box 33x,xxx miles... for $13,000.
Quote from: BobbyB on November 05, 2015, 03:30:04 PMQuote from: moto123 on November 05, 2015, 01:13:20 PMI concur. I have been keeping my eyes on craigslist for a while and there hasn't been anything for a decent price recently.There was a 2500 of the 04-06 vintage on CL up here, manual, quad cab, short box 33x,xxx miles... for $13,000. bobby, that manual was actually a rare combo.
I would say drill a hole at each end of the crack and then use the frame kit that I think don used on his to strengthen that area.
Quote from: nmeyer414 on November 14, 2015, 03:09:01 PMI would say drill a hole at each end of the crack and then use the frame kit that I think don used on his to strengthen that area.Second gen has a different setup NateYou could probably get away with cutting the crack out, then welding it back, then box up that part of the frame and run some steel bushings through the frame and use longer bolts. Maybe weld some stiffener inside the frame as well.
From what I have seen they just include a spacer for longbeds vs SB. Since you have both trucks just crawl under and see it that works? Summit sell tube in lengths for that with nice band clamps.That frame brace is nice, but you need to fix the crack. Pull the bolt, grid the crack and weld it up.
The band clamps are very strong, allow for removal or changes and never rust. Check em out before you weld.