2" Grizzly Magnetic Base Drill

[stlaser]

So after years of wanting one I finally pulled the trigger this morning and bought on a sale flyer / email. At $700 delivered it was too good to pass up and with larger shop I can see myself doing some heavier fab jobs on occasion. In reality the larger reason is the shop had a good year and I need some expenses according to my accountant.

specs below:

Grizzly PRO T30944 2" Magnetic Drill
A consistent, accurate and more powerful magnetic drill.
The Grizzly PRO T30944 2" Magnetic Drill is designed for tough, industrial-level use that will keep cutting on the most demanding of jobs. When it comes to drilling tough metals in hard-to-access locations, you can't beat the precision and speed of a magnetic drill.

With 3500 lbs. of force, the magnetic base of the T30944 adheres to ferrous metal surfaces when turned on. The mag drill can be positioned to drill vertically, horizontally or overhead, just be sure to secure the drill in the event of a power loss.

The 2 HP motor smoothly powers the variable-speed drill press from 100–810 RPM. The T30944 comes equipped with a 3/4" Weldon tool holder to give users access to the broadest selection of annular cutters and twist drills on the market. An included 1/2"–20 adapter for the drill chuck opens the options even further.

Coupled with a spindle stroke of 6", a gravity-fed coolant system, and a heavy-duty case for hauling and storage, these mag drills are consistent, accurate and powerful.

Like all Grizzly mag drills, the T30944 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.)

The T30944 manual was written by our U.S. based Technical Documentation Department and is packed with useful information.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the mag drill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

Made in an ISO 9001 factory

SPECIFICATIONS
Motor: 2 HP, 110V, single-phase, 13.4A
Spindle bore: 3/4"
Spindle Stroke: 6-3/16"
Spindle speed: Variable, 100–810 RPM
Max. distance spindle to table: 7"
Cutter shank diameter: 3/4" Weldon
Max. carbide annular cutter diameter: 2"
Max. HSS annular cutter diameter: 2"
Max. twist drill diameter: 1/2"
Magnetic holding force: 3500 lbs.
Magnetic base dimensions: 6-1/2" x 3-1/4"
Coolant tank capacity: 18 oz.
Overall dimensions: 7" W x 10" D x 22" H
Approximate shipping weight: 34 lbs.
FEATURES
Gravity-fed coolant system
Heavy-duty storage case
Includes Weldon 3/4" to 1/2"–20 adapter for drill chuck
Includes 1/16"–1/2" drill chuck
Includes replacement fuses
Includes 5' nylon strap

and link:

https://www.grizzly.com/products/grizzly-pro-2-magnetic-drill/t30944

[cj7ox]

That's a cool piece of kit!

[stlaser]

That's a cool piece of kit!

I’d agree, now I need a nice set of annular cutters for it….

[Flyin6]

Yikes!

[dave945]

That's a cool piece of kit!

I’d agree, now I need a nice set of annular cutters for it….

Does that mean you can only use them once a year?


Sent from my iPhone using Tapatalk

[KensAuto]

That's a cool piece of kit!

I’d agree, now I need a nice set of annular cutters for it….

Does that mean you can only use them once a year?


Sent from my iPhone using Tapatalk

[Farmer Jon]

We have this evolution brand. It sits on the shelf most of the time but when it's needed its a lifesaver.

Sent from my Pixel 5 using Tapatalk

[Sammconn]

I will recommend a chain if it’s being used overhead.
They are hard to catch when the fall…still running.

Even with 3500# you can overpower the magnet.

But yes nice score.
The cutters are awesome too.
The ones we have at work are anyway. (No idea on brand)

[stlaser]

I will recommend a chain if it’s being used overhead.
They are hard to catch when the fall…still running.

Even with 3500# you can overpower the magnet.

But yes nice score.
The cutters are awesome too.
The ones we have at work are anyway. (No idea on brand)

Can’t say I ever considered running it overhead, chain noted if I do!

[stlaser]

Came in quick and packaged well. Even has a nice hard case. I’ll test it out later and do a formal review. Merry Christmas to me!


Sent from my iPhone using Tapatalk

[TexasRedNeck]

Nice!


Sent from my iPhone using Tapatalk

[JR]

Nice, wish mine had a case but that kit was another $100. Specs are similar, works good so far.

[stlaser]

So I finally bought some slugger cutters for this and played with it (machining that 1” base for fireball vise). All in all I like the drill, I however have a couple complaints with plastic and accessories. First no Allen wrench provided in the case for the drill Chuck or to tighten the slug cutters in the head. And yes Ken I have allen wrenches but don’t keep them as handy like that wrench er wretch H you have readily available at all times. Second complaint is the case is in reality pretty cheap as far as plastic goes. Last is the you must remove handles and drill Chuck to store it in said plastic. Otherwise it doesn’t fit.

[JR]

Just used my cheapo for a 1.25 pin hole in a bucket, worked great. Lots of lube is a must.