0 Members and 2 Guests are viewing this topic.
Looks like you got plenty done.... I spent the day on my Exmark shortening the grass on 7 acres and change. Good news is, the spring cleanup of the lawn is done, so I can take the bagger off now.
It's going to hit. Even with the axle in the stock location and 4" of lift, a 35" tire will hit that front corner. Usually I rim mine under the marker lights... then wrap the front bumper around the corner to make it look cleaner. Wish I had a pic.....
There's definitely been a lot of work going on, just that most of it involves dirt at the moment.But we have movement on SquareD!I got the relay and switch panel in from John, owner of ARC electronics. He is a great guy to work with. Very laid back and interested in solving your problems. I had shorted out his switch panel by mistake so he sent me a new one. I then proceeded to short that one out in the first 30 minutes I had it! So I soldered jumper wires in and made all that better. It produced this fully operational battle station, err, I mean switch panel.
Don.... could you do me a favor when you get a chance.... and measure from the top of your front axles spring plate (centered) to the frame? I'd sure appreciate it.
Oh my goodness, it's a 1/16" off!! the world will end !! can you imagine how much lower the left side will be when Don gets in the truck? oh boy :)
Thanks Don that helps me considerably. Our Ramcharger measures 7.5" at the same place. That's with 12 year old Alcan 4" custom springs. They measured 8.1" with the big block gasser when new 200K miles ago. You have Jim's 2" drop hanger and longer shackles correct?
Thanks Don you have gave me something to ponder while staring at the bare frame and wondering what to do next LoL We have a week of rain forecast....no farming will be done...so I should build something.
A whole lotta talk happening... Not alotta work....Wash off that mower after every use, then when you get ready to mow again, it's already cleaned up and agile. No down time getting ready to mow...just curious as to what this moving button did.....