Hello Guest

Author Topic: SquareD Part 8, This thing ever going to get finished?  (Read 108061 times)

0 Members and 11 Guests are viewing this topic.

Offline Nate

  • Administrator
  • *****
  • Posts: 5743
  • I like to torment Ken!
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #350 on: December 08, 2017, 07:46:02 PM »
and we have progress
If you need the promise of eternity in the kingdom of heaven to be a good person … You were never a good person in the first place!

Offline JR

  • Moderator
  • ***
  • Posts: 13536
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #351 on: December 08, 2017, 09:16:11 PM »
Hmm, timing.

At least it is getting there.
Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline Bigdave_185

  • Raising Boys into Real Men!
  • Registered
  • **
  • Posts: 7686
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #352 on: December 08, 2017, 09:30:38 PM »
Still a sweet looking truck running or not


Sent from my iPhone using Tapatalk

Offline cudakidd53

  • Moderator
  • ***
  • Posts: 3142
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #353 on: December 08, 2017, 09:41:51 PM »
Who’d a thunk that to get this beast running efficiently, you’d have to retard the timing?  Like this project needs to take longer!  :laugh:
2012 Silverado LTZ - Duramax
Christian since 1975 - Field Trial Brittanys - NRA Lifetime Member

"When you're dead, you don't know you're dead. Hence, dealing with this fact is not difficult. It is only hard for those still living around you.....It's the same when you're stupid."

Offline KensAuto

  • Moderator
  • ***
  • Posts: 7684
  • My abuser is named Nate
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #354 on: December 09, 2017, 01:29:05 AM »
Man, I hear "timing is off" and "retarded" and I thought you guys were talking about me again.




Sent from my Pixel using Tapatalk

Underpaid and misunderstood since 2014

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #355 on: December 09, 2017, 08:29:09 AM »
Still a sweet looking truck running or not


Sent from my iPhone using Tapatalk
Danke
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #356 on: December 09, 2017, 08:30:18 AM »
Man, I hear "timing is off" and "retarded" and I thought you guys were talking about me again.




Sent from my Pixel using Tapatalk


Ken,

You, sir are one of the most level headed of the boneheads that inhabit this place. Why you chose to run with the likes of Shawn is mystifin'
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #357 on: December 09, 2017, 08:31:16 AM »
Who’d a thunk that to get this beast running efficiently, you’d have to retard the timing?  Like this project needs to take longer!  :laugh:
Why not? It seems to be a proven method of our educational system!












Gotcha!
« Last Edit: December 09, 2017, 08:31:59 AM by Flyin6 »
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline stlaser

  • Moderator
  • ***
  • Posts: 10205
  • Official PIA
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #358 on: December 09, 2017, 09:28:32 AM »
Man, I hear "timing is off" and "retarded" and I thought you guys were talking about me again.




Sent from my Pixel using Tapatalk


Ken,

You, sir are one of the most level headed of the boneheads that inhabit this place. Why you chose to run with the likes of Shawn is mystifin'

Ken, even though you’re currently on cloud nine like a giddy 12 year old girl at her first school dance let me decode what Don just stated.

A) you’re still a bonehead albeit in his opinion moving up the ranks very slowly...

B) you’re still in his opinion a DOT who is capable of going off the rails at any minute, getting back together with the band & your gf H no less

C) obviously Don has a major trust issue with you





Living in the remote north hoping Ken doesn’t bring H up here any time soon…..

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #359 on: December 09, 2017, 09:40:42 AM »
 :facepalm:
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline cudakidd53

  • Moderator
  • ***
  • Posts: 3142
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #360 on: December 09, 2017, 10:17:13 AM »
Who’d a thunk that to get this beast running efficiently, you’d have to retard the timing?  Like this project needs to take longer!  :laugh:
Why not? It seems to be a proven method of our educational system!












Gotcha!

thats why I cannot wait to retire!
2012 Silverado LTZ - Duramax
Christian since 1975 - Field Trial Brittanys - NRA Lifetime Member

"When you're dead, you don't know you're dead. Hence, dealing with this fact is not difficult. It is only hard for those still living around you.....It's the same when you're stupid."

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #361 on: December 09, 2017, 03:51:36 PM »
Pretty big font there Mike, trying to emphasize something?
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline JR

  • Moderator
  • ***
  • Posts: 13536
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #362 on: December 09, 2017, 08:33:15 PM »
Think I had more free time when I worked,,,,,
Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline cudakidd53

  • Moderator
  • ***
  • Posts: 3142
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #363 on: December 09, 2017, 09:14:37 PM »
Pretty big font there Mike, trying to emphasize something?

Just 32 years of increasing stupidity from supposedly educated people!
2012 Silverado LTZ - Duramax
Christian since 1975 - Field Trial Brittanys - NRA Lifetime Member

"When you're dead, you don't know you're dead. Hence, dealing with this fact is not difficult. It is only hard for those still living around you.....It's the same when you're stupid."

Offline wyorunner

  • Registered
  • **
  • Posts: 1387
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #364 on: December 09, 2017, 10:10:49 PM »
Pretty big font there Mike, trying to emphasize something?

Just 32 years of increasing stupidity from supposedly educated people!

You're a good Man cuda, sticking through it as you had to watch it all be destroyed from those who "know better" God bless you for trying. And I'd wager there are many who have been blessed by having you as a teacher.

OldKooT

  • Guest
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #365 on: December 11, 2017, 10:45:47 AM »
Monday Square D date 12/11/17 .......

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #366 on: December 11, 2017, 10:52:53 AM »
Monday Square D date 12/11/17 .......
That a question?

Working on wood projects today Norm. I'll call them later on in the day...
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

OldKooT

  • Guest
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #367 on: December 11, 2017, 10:56:32 AM »
No pressure Don... just keeping the dream  :laugh:

I can relate to the other projects aspect... I am about to begin the battle of me vs old Case skid steer. Some nit wit hid my spare air compressor in a rather hard to get to location....so need to move some heavy stuff and well...it best start LoL

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #368 on: December 11, 2017, 11:02:11 AM »
No pressure Don... just keeping the dream  :laugh:

I can relate to the other projects aspect... I am about to begin the battle of me vs old Case skid steer. Some nit wit hid my spare air compressor in a rather hard to get to location....so need to move some heavy stuff and well...it best start LoL
I feel the pain!

Number 1 rule of work: You must first work to be able to work...
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline JR

  • Moderator
  • ***
  • Posts: 13536
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #369 on: December 11, 2017, 01:17:15 PM »
Monday Square D date 12/11/17 .......

OK, so now we have 3 time era's

B.C.

A.D.

S.D.
« Last Edit: December 11, 2017, 01:17:47 PM by JR »
Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #370 on: December 11, 2017, 04:36:02 PM »
and the third is SquareD time?

Shouldn't that just be DT?

Truck didn't do anything. But I get it. Time, for people stopped when the build stopped...copy that. So we reference SD time from when? When the build started? Or from when it slowed to a near stop?

OK, on my way out to pick up the 2 X 10's for today's project (Buildin' archs) I stopped by the diesel shop.

Nothing to report as they were busy cooking on some other truck. Read: Hadn't gotten to it yet today. That was around noon.

Standby for a possible standby, I'll check back in in the morrow!
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Bigdave_185

  • Raising Boys into Real Men!
  • Registered
  • **
  • Posts: 7686
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #371 on: December 11, 2017, 08:51:42 PM »
Will you pass the forum to one of these guys so we can get min to min updates and at least one of them will be doing nothing but playing with their phone all day


Sent from my iPhone using Tapatalk

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #372 on: December 11, 2017, 11:03:25 PM »
Will you pass the forum to one of these guys so we can get min to min updates and at least one of them will be doing nothing but playing with their phone all day


Sent from my iPhone using Tapatalk
I'll see what I can do ;-)
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

OldKooT

  • Guest
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #373 on: December 12, 2017, 07:07:01 AM »
who has 12/12 on the square D runs pool?

Hi Don  :grin:

Offline cruizng

  • Registered
  • **
  • Posts: 1112
  • Happy to be here.
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #374 on: December 12, 2017, 08:46:12 AM »
Norm, Do you have to put a year qualifier on that date?  :shocked:
Mike
Sold the DMax in MN and am currently vehicle less.

Offline KensAuto

  • Moderator
  • ***
  • Posts: 7684
  • My abuser is named Nate
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #375 on: December 12, 2017, 09:45:30 AM »
Norm, Do you have to put a year qualifier on that date?  :shocked:

 :beercheers:
Underpaid and misunderstood since 2014

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #376 on: December 12, 2017, 11:28:11 AM »
cruel!
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline Tedram

  • Registered
  • **
  • Posts: 32
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #377 on: December 12, 2017, 12:49:14 PM »
So I have been absent from this site for a LONG LONG time, I thought i could hop in and see Ole SquareD tearing up the Tuckey and scaring all the Snowflakes back to the West coast....... So close! I'll come back in another two years and hope she is still not at the shop......


2008 GMC 3500 HD CCLB Dually with EFI Live Tunes by Idaho Rob/DSP5 Switch/DPF delete 4" MBRB exhaust/S&B Dry Filter Intake/Edge CTS monitor w/EGT probe/AD 165 Liftpump/Titan 62 Gallon fuel tank/XD Monster wheels/ReTraxPro Bed Cover/Firestone Air Bags and a EGR Blocker plate in the glove box waiting for the the stars to align to install.

Offline stlaser

  • Moderator
  • ***
  • Posts: 10205
  • Official PIA
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #378 on: December 12, 2017, 01:33:00 PM »
 :popcorn:

So I have been absent from this site for a LONG LONG time, I thought i could hop in and see Ole SquareD tearing up the Tuckey and scaring all the Snowflakes back to the West coast....... So close! I'll come back in another two years and hope she is still not at the shop......
Living in the remote north hoping Ken doesn’t bring H up here any time soon…..

Offline KensAuto

  • Moderator
  • ***
  • Posts: 7684
  • My abuser is named Nate
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #379 on: December 12, 2017, 01:45:05 PM »
Good, we have another Az guy back in action. Darn hippies been teaming up 'gainst me.
Underpaid and misunderstood since 2014

Offline longball

  • Registered
  • **
  • Posts: 797
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #380 on: December 12, 2017, 01:53:40 PM »
So I have been absent from this site for a LONG LONG time, I thought i could hop in and see Ole SquareD tearing up the Tuckey and scaring all the Snowflakes back to the West coast....... So close! I'll come back in another two years and hope she is still not at the shop......

Haha


Sent from my iPhone using Tapatalk

Offline JR

  • Moderator
  • ***
  • Posts: 13536
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #381 on: December 12, 2017, 03:00:16 PM »
who has 12/12 on the square D runs pool?

Hi Don  :grin:


Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #382 on: December 12, 2017, 06:53:35 PM »
No word from the mechs today gents...
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline KensAuto

  • Moderator
  • ***
  • Posts: 7684
  • My abuser is named Nate
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #383 on: December 12, 2017, 07:54:29 PM »
Daggon wrenchturners!

Sent from my Pixel using Tapatalk

Underpaid and misunderstood since 2014

Offline Tedram

  • Registered
  • **
  • Posts: 32
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #384 on: December 12, 2017, 08:07:27 PM »
No word from the mechs today gents...

They are probably scratching their heads and don't know what to do after they saw the timing was spot on...........
2008 GMC 3500 HD CCLB Dually with EFI Live Tunes by Idaho Rob/DSP5 Switch/DPF delete 4" MBRB exhaust/S&B Dry Filter Intake/Edge CTS monitor w/EGT probe/AD 165 Liftpump/Titan 62 Gallon fuel tank/XD Monster wheels/ReTraxPro Bed Cover/Firestone Air Bags and a EGR Blocker plate in the glove box waiting for the the stars to align to install.

Offline Bigdave_185

  • Raising Boys into Real Men!
  • Registered
  • **
  • Posts: 7686
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #385 on: December 13, 2017, 07:25:39 AM »
No word from the mechs today gents...

They are probably scratching their heads and don't know what to do after they saw the timing was spot on...........
This is the second post in one day. Slow down big fella


Sent from my iPhone using Tapatalk

Offline TexasRedNeck

  • punching bag for moderator humor
  • Global Moderator
  • ****
  • Posts: 11314
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #386 on: December 13, 2017, 08:50:44 PM »
???????


Sent from my iPhone using Tapatalk
Kids today don't know how easy they have it. When I was young, I had to walk 9 feet through shag carpet to change the TV channel.

Joshua 6:20-24

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #387 on: December 13, 2017, 11:27:38 PM »
I called them today and Mike said that they had not worked on SquareD yet, and would not get to it today.
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

Offline stlaser

  • Moderator
  • ***
  • Posts: 10205
  • Official PIA
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #388 on: December 13, 2017, 11:31:25 PM »
I called them today and Mike said that they had not worked on SquareD yet, and would not get to it today.

Are you & this mechanic related? :popcorn:

I mean it is the Tuck so isn’t it like a law or unspoken rule that everyone is related or distant cousins or some such thing?
Living in the remote north hoping Ken doesn’t bring H up here any time soon…..

Offline Wilbur

  • Registered
  • **
  • Posts: 1538
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #389 on: December 13, 2017, 11:36:11 PM »
I purposely avoided looking at this thread for days...scratch that...weeks....to avoid disappointment....but hey...its out of the garage and sounds like it's coughing and chugging like... before. But instead of 1 guy doing that now it takes 2 guys to do that....do I have that right? Must be a gubbmint job.

Well it'll make a nice Christmas present for the pre-rangers.....  when they retire or sumthin....

 :popcorn:

Offline stlaser

  • Moderator
  • ***
  • Posts: 10205
  • Official PIA
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #390 on: December 13, 2017, 11:44:17 PM »
I purposely avoided looking at this thread for days...scratch that...weeks....to avoid disappointment....but hey...its out of the garage and sounds like it's coughing and chugging like... before. But instead of 1 guy doing that now it takes 2 guys to do that....do I have that right? Must be a gubbmint job.

Well it'll make a nice Christmas present for the pre-rangers.....  when they retire or sumthin....

 :popcorn:

Just like that Mercedes commercial, little boy wakes up every Christmas and the driveway is empty. Fast forward he is in his 40’s & that Christmas morning of random there sits that bright & shiny vehicle of his dreams.....
« Last Edit: December 13, 2017, 11:44:50 PM by stlaser »
Living in the remote north hoping Ken doesn’t bring H up here any time soon…..

Offline TexasRedNeck

  • punching bag for moderator humor
  • Global Moderator
  • ****
  • Posts: 11314
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #391 on: December 14, 2017, 12:03:41 AM »
I called them today and Mike said that they had not worked on SquareD yet, and would not get to it today.

Are you & this mechanic related? :popcorn:

I mean it is the Tuck so isn’t it like a law or unspoken rule that everyone is related or distant cousins or some such thing?
We should check the mandals photos to see how may ties Don has. 6 each would be a strong indication of a family tree like a telephone pole


Sent from my iPhone using Tapatalk
Kids today don't know how easy they have it. When I was young, I had to walk 9 feet through shag carpet to change the TV channel.

Joshua 6:20-24

Offline stlaser

  • Moderator
  • ***
  • Posts: 10205
  • Official PIA
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #392 on: December 14, 2017, 12:06:19 AM »
I called them today and Mike said that they had not worked on SquareD yet, and would not get to it today.

Are you & this mechanic related? :popcorn:

I mean it is the Tuck so isn’t it like a law or unspoken rule that everyone is related or distant cousins or some such thing?
We should check the mandals photos to see how may ties Don has. 6 each would be a strong indication of a family tree like a telephone pole


Sent from my iPhone using Tapatalk

ROFL.....


You realize Charles we’re definitely getting banned for this.......
« Last Edit: December 14, 2017, 12:09:09 AM by stlaser »
Living in the remote north hoping Ken doesn’t bring H up here any time soon…..

Offline Wilbur

  • Registered
  • **
  • Posts: 1538
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #393 on: December 14, 2017, 12:24:32 AM »
 :laugh: :laugh: :laugh:

 :popcorn:

Offline JR

  • Moderator
  • ***
  • Posts: 13536
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #394 on: December 14, 2017, 12:34:48 AM »


You realize Charles we’re definitely getting banned for this.......

Sounds like a party! Well at least a good BBQ  :beercheers:
Retired LEO  Lifetime NRA+  Outcast in Calif

"The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants"

Thomas Jefferson

Offline rpar86

  • Registered
  • **
  • Posts: 1256
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #395 on: December 14, 2017, 02:55:34 AM »
and the third is SquareD time?

Shouldn't that just be DT?

Truck didn't do anything. But I get it. Time, for people stopped when the build stopped...copy that. So we reference SD time from when? When the build started? Or from when it slowed to a near stop?

OK, on my way out to pick up the 2 X 10's for today's project (Buildin' archs) I stopped by the diesel shop.

Nothing to report as they were busy cooking on some other truck. Read: Hadn't gotten to it yet today. That was around noon.

Standby for a possible standby, I'll check back in in the morrow!


D.T.... Down time? ;)
Ryan
2006 GMC 3500 6.6 CCLB SRW 4x4

Offline TexasRedNeck

  • punching bag for moderator humor
  • Global Moderator
  • ****
  • Posts: 11314
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #396 on: December 14, 2017, 08:41:36 AM »
I called them today and Mike said that they had not worked on SquareD yet, and would not get to it today.

Are you & this mechanic related? :popcorn:

I mean it is the Tuck so isn’t it like a law or unspoken rule that everyone is related or distant cousins or some such thing?
We should check the mandals photos to see how may ties Don has. 6 each would be a strong indication of a family tree like a telephone pole


Sent from my iPhone using Tapatalk

ROFL.....


You realize Charles we’re definitely getting banned for this.......
You realize I am currently banned?? So banning the banned may be less than effective.


Sent from my iPhone using Tapatalk
Kids today don't know how easy they have it. When I was young, I had to walk 9 feet through shag carpet to change the TV channel.

Joshua 6:20-24

Offline stlaser

  • Moderator
  • ***
  • Posts: 10205
  • Official PIA
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #397 on: December 14, 2017, 08:47:08 AM »
Well then, maybe he’ll fire you & you’ll have to join Ken and I as independent contractors. Come to think of it maybe just me, if I recall Ken has been going through cases of Carmex for all the butt kissing he’s been doing as of late.....
Living in the remote north hoping Ken doesn’t bring H up here any time soon…..

Offline Flyin6

  • Head cook and bottle washer
  • Administrator
  • *****
  • Posts: 34008
    • View Profile
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #398 on: December 14, 2017, 09:23:48 AM »
I called them today and Mike said that they had not worked on SquareD yet, and would not get to it today.

Are you & this mechanic related? :popcorn:

I mean it is the Tuck so isn’t it like a law or unspoken rule that everyone is related or distant cousins or some such thing?
Shawn, research suggests that there is no more than three degrees of separation between any two different people on earth.

Here in the tuck we like to keep it closer than that!
Site owner    Isaiah 6:8, Psalm 91 
NSDQ      Author of the books: Distant Thunder and Thoren

OldKooT

  • Guest
Re: SquareD Part 8, This thing ever going to get finished?
« Reply #399 on: December 14, 2017, 10:14:01 AM »
It's Thursday.... I had a dream last night that Don actually put Square D in a storage shed to make room in his garage for a home gym. I woke up thinking....I should do that with the Yeller Chevy LoL

So no word yet?  I guess back to my days planned activity....

 

SimplePortal 2.3.6 © 2008-2014, SimplePortal