0 Members and 1 Guest are viewing this topic.
Is that Wide Temperature Range? Are you saying you’re having hot flashes? Sent from my iPhone using Tapatalk
Listening today on how so many areas have more registered voters than there are adults, fitting.
Sent from my iPhone using Tapatalk
Vote early, vote often...
Seems fair....
He is not going to let them in. In any event it is months away with a hurricane or two before they get near.Soldiers won't have to man the border, we citizens are fed up and will stand guard whether we have the 1st Cav or not.
Ok guys. Let’s drop the hyperbole and talking points and look at this logicallyhttps://youtu.be/LPjzfGChGlESent from my iPhone using Tapatalk
Since Shawn asked and I didn't want to clutter up Dave's thread anymore than we already had, I got my results from Blackstone back and it would appear that Jiffy Lube is off the hook, one way or another. Everything is consistent with them having put in 5w30 albeit cheap stuff, but not waste oil. (that is unless they were just covering their tracks and changed the oil again before sending Cyndie down the road to their "authorized mechanic." Either way, 6 in one hand 1/2 doz in the other scenario, so I'm going to do a hot flush, run some seafoam and ATF through it, dump new flush mixture in as I'm draining old out, and cycle it once again w/ new fresh oil, filters along the way etc. if it works, I'm back in business and sludge was my culprit all along, if not, I'll probably drop a good used long block in there rather than rebuild the top end of a 193k motor and oil pump... I'll keep y'all updated but for now it's just depressing.
You could drive it till it goes pop. You'd be surprised how long it will last with 15psi. I have a company vehicle running around with 8, and 0 at idle...spun cam bearing. They just don't want to spend the money. Only thing that would take it out quicker is if the roller lifters aren't rolling anymore.
Quote from: KensAuto on January 09, 2019, 08:13:00 PMYou could drive it till it goes pop. You'd be surprised how long it will last with 15psi. I have a company vehicle running around with 8, and 0 at idle...spun cam bearing. They just don't want to spend the money. Only thing that would take it out quicker is if the roller lifters aren't rolling anymore.it's got some lifter noise, I have to stop by and listen to it today and make a decision. $2200 for a 6.0L w/ 60k on it, no core no tax, delivered is my best offer on a replacement so far. what would you do to prolong it if you decided to just drive it Ken? My wife basically runs back and forth to dance the grocery store with it. throw some 10w40 at it?