This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - TexasRedNeck
Pages: 1 ... 156 157 [158] 159 160 ... 224
7851
« on: September 21, 2016, 01:15:51 PM »
In a slightly deeper thought....I imagine they had to practice/learn to walk different and mimick the beat down aura that Muslim women exhibit....all while holding a pistol at the ready in the lions den.
Sent from my iPad using Tapatalk
7852
« on: September 21, 2016, 01:14:19 PM »
Buy him a 1980 gm product and cut him loose, he'll learn quickly
Sent from my iPad using Tapatalk
7853
« on: September 20, 2016, 10:03:08 PM »
I thought about that Shawn but the cylinder, valve and pump costs almost what that whole set up costs. Well I guess I don't need a pump. If I didn't have 82 projects in line already it might be more appealing.
Sent from my iPad using Tapatalk
7854
« on: September 20, 2016, 10:01:13 PM »
Roger that.
Sent from my iPad using Tapatalk
7855
« on: September 20, 2016, 09:05:54 PM »
Any concerns about the age of the tank? 1941?
7857
« on: September 20, 2016, 07:42:40 PM »
Phil, thanks for the feedback. Can you elaborate? Seemed to match up with the hydraulics on my Kubota OK.
7858
« on: September 20, 2016, 04:22:49 PM »
AAA card and a cell phone. GO!
7859
« on: September 20, 2016, 04:18:04 PM »
Meh, that's how I wash/wax the front cap on the RV. Hadn't killed myself.....yet
Not like my 70 year old dad who ratchet strapped a ladder to the bucket of a 45ft boom lift because he needed to top a tree that was taller than the lift. I come over and he's out on the ladder with a chainsaw. I sat down and drank my coffee to watch. Mom came out and asked me why I wasn't telling him to get down.
I just said " he's a grown man, and he knows better. I just want to be here when he hits the ground so I can laugh at him"
7860
« on: September 20, 2016, 03:34:50 PM »
meh, 10 ft ladder in the back of the truck bed and you can change them easily.
7861
« on: September 20, 2016, 03:33:21 PM »
Prob too late, but the 8ft fixtures seem to work well for me. I have 4 8ft double tube in my 20x30, plus 2 beehive 300w equivalent med base florescent plus two 4ft double tube over the work bench. Still not bright enough at times for my aging eyes.
Id probably do more in the RV area at a minimum given the ceiling height, maybe just another row of three down the middle.\
looking good Kyle!
7862
« on: September 20, 2016, 03:04:00 PM »
7863
« on: September 18, 2016, 11:27:56 PM »
^ this
Sent from my iPhone using Tapatalk
7864
« on: September 18, 2016, 06:24:47 PM »
7865
« on: September 18, 2016, 06:22:40 PM »
I like your taste in movies......I bet you can find Star Wars themed outlets and switches
7866
« on: September 18, 2016, 03:16:21 PM »
Congrats Mike. Officially off the payroll ? My youngest wanted to change up her decor. I got roped into applying the wall decal. As you can see she is going with the flamingo theme. Sent from my iPhone using Tapatalk
7867
« on: September 18, 2016, 09:26:37 AM »
I struggle with gear ratios for a 5sp Allison on 34s. I wish I had spent the money on the six speed upgrade
Sent from my iPad using Tapatalk
7868
« on: September 17, 2016, 10:08:32 PM »
Sent from my iPhone using Tapatalk
7869
« on: September 17, 2016, 09:51:28 PM »
Went to the hide to hide from 7 teenage girls having sleepover at my house. Installed a wifi thermostat, a 2 stage filter for the fridge, harvested peppers, laid out a new door mat, fixed a couple of security cameras (ants got into one and killed it) sprayed organize pest and fungus treatment, a few other things and then headed back home to assess the damage.
Sent from my iPad using Tapatalk
7870
« on: September 17, 2016, 08:31:44 AM »
For paint I'd do brush on POR15. Very tough.
Sent from my iPad using Tapatalk
7871
« on: September 16, 2016, 08:33:20 PM »
M80s are a mythical firecracker that was purportedly equal to 1/4 stick of dynamite. (It's not) they are probably about 30-40 black cat equivalent so make a good bang. They'll light a pile of gas but not tannerite. Tannerite requires a projectile shock wave of 2000fps or greater
Sent from my iPhone using Tapatalk
7872
« on: September 16, 2016, 02:16:08 PM »
I do! Unleaded gas an an M80 firecracker
Sent from my iPhone using Tapatalk
7873
« on: September 16, 2016, 02:15:07 PM »
I needed one of those when I was sighting in my 460wby....
Sent from my iPhone using Tapatalk
7874
« on: September 15, 2016, 11:51:20 PM »
Love it!
Reminds me of the Israelis and Operation Spring of Youth in 1973 when IDF dressed as women to hit PLO targets
7875
« on: September 15, 2016, 07:40:52 AM »
They make it sound so technical. What's extractor smear...
Sent from my iPhone using Tapatalk
7876
« on: September 15, 2016, 07:36:00 AM »
Cream puff! Nice pick up
Sent from my iPhone using Tapatalk
7877
« on: September 14, 2016, 11:07:37 PM »
I approve of this message
7878
« on: September 14, 2016, 11:06:38 PM »
39 could be our annual low temp here in Houston
7879
« on: September 13, 2016, 08:56:04 PM »
true then or true now?
7880
« on: September 13, 2016, 08:53:05 PM »
7881
« on: September 13, 2016, 08:40:55 PM »
7882
« on: September 12, 2016, 11:31:59 PM »
I meant to type nerf but I guess they are push bars.
Sent from my iPhone using Tapatalk
7883
« on: September 12, 2016, 11:23:31 PM »
Personal opinion not based in fact
Stay away from carbon fiber wrapped barrels. Any rough treatment and a crack could render it worthless.
Go for the adjustable gas block to address load variances and when suppressed.
Sent from my iPhone using Tapatalk
7884
« on: September 12, 2016, 11:11:59 PM »
Thanks Ken. I am picky. Here is a rendering of what I'm thinking. Comments and thoughts? Sent from my iPhone using Tapatalk
7885
« on: September 12, 2016, 07:55:28 PM »
So the back bumper you may recall was replaced with a black Fab Four. I'm working my way forward. I changed the mud flaps to black and ordered a new black exhaust tip. Once I get the steps done I'll get to work on the front end. Going to look for a Denali bumper to paint match after fabricating some police style push bars to weld to it which will also create a non airflow restricting spot for a light bar. I have extra headlights which will be transformed and then a black mesh grill. Sent from my iPhone using Tapatalk
7886
« on: September 12, 2016, 07:48:49 PM »
Menses, after the black wheel transformation I have decided to make a change on the steps. I was going to take them off and take them to a bed liner place and have them shot with black UV resistant liner.
I'd like to try this myself but have a few questions.
1. Are any of the DIY products as good as the products used by LineX etc? Including UV? 2. If so, which ones? 3. What is the consensus on prepping chrome for best results?
Thanks
7887
« on: September 12, 2016, 04:22:08 PM »
Shawn I'm sorry to hear. If he was a Christian then he had run the course and has heard "well done my good and faithful servant". Now my prayers are for condolences for the family members that He would grant them solitude in their moment of grief.
Sent from my iPhone using Tapatalk
7888
« on: September 11, 2016, 11:22:34 PM »
Stupid ROE is why things get messed up and drawn out. They don't hate us any less because you didn't kill those hajis.
7889
« on: September 11, 2016, 10:57:46 PM »
HSLDDOT. High speed low drag derailer of threads, that Shawn is..
7890
« on: September 11, 2016, 08:01:49 PM »
Yeah, I came out to find my new Nittos with a slow leak on the driver's rear. Apparently driving all over the hunting lease trails put something like a weesatch thorn in my tire. It is a very slow leak to take 2 weeks to get from 70 to 30
7891
« on: September 11, 2016, 06:35:07 PM »
Unless you plan on running the dryer and welder at the same time, you can run them both on the same circuit to save space. I'd suggest you run a 4 wire 50 amp circuit to a pole outside for the RV....just in case I bring the redneck hotel.....
7892
« on: September 11, 2016, 09:13:20 AM »
How soon we forget. Yet they are still out there. Our enemies are fully committed. I'm not sure I can say the same for America right now.
What drives it home for me is the broadcast, which has been sanitized, that shows the people jumping to their death from 100 floors up and the reporter who identifies the loud bangs heard in audio as the sound those bodies make as they hit the pavement.
Sent from my iPhone using Tapatalk
7893
« on: September 10, 2016, 04:50:19 PM »
The biggest problem I've encountered is hot tire pick up. Pulling in with hot tires and then they cool and adhere overnight. Next time the tire moves it pulls a chunk of coating with it. If the coating is of unknown origin and quality is opt to sand it all and know you are giving your new coating the best chance
Sent from my iPhone using Tapatalk
7894
« on: September 09, 2016, 11:34:36 PM »
i went 4-10
But God, being rich in mercy, because of His great love with which He loved us, 5 even when we were dead [f]in our transgressions, made us alive together [g]with Christ (by grace you have been saved), 6 and raised us up with Him, and seated us with Him in the heavenly places in Christ Jesus, 7 so that in the ages to come He might show the surpassing riches of His grace in kindness toward us in Christ Jesus. 8 For by grace you have been saved through faith; and [h]that not of yourselves, it is the gift of God; 9 not as a result of works, so that no one may boast. 10 For we are His workmanship, created in Christ Jesus for good works, which God prepared beforehand so that we would walk in them
7895
« on: September 09, 2016, 11:31:32 PM »
JR, I actually thought about funding a white people dorm so we could reflect on the injustice...
7896
« on: September 09, 2016, 11:30:24 PM »
Cool Bobby. Picked up a few things
7897
« on: September 09, 2016, 06:16:50 PM »
Thanks guys, there are so many buttons and gadgets to learn.
Tex, I don't need those pesky extra tires. The heaviest thing put into the bed once I get the new cap on will be an ice chest or maybe a deer or even an elk someday. I tow pull trailers not 5th wheels and have a dump trailer for hauling stuff.
Just poking at you bob. Just today I could not get through the ATM drive through because tires on both sides were hitting. Had to park and walk up Sent from my iPhone using Tapatalk
7898
« on: September 09, 2016, 05:22:05 PM »
Oh and here's my latest photo of my raggedy truck
7899
« on: September 09, 2016, 05:16:39 PM »
Don't know why but that reminded me of a funny story.
Good friend and trainer of mine, SF Ranger went to work for Precinct 4 Sherrifs office. You have to pay your dues in the jail before getting on to better things apparently.
So another deputy is talking smack about being a ninja black belt all the time and David keeps blowing him off. While escorting a prisoner cuffed and shackled a female deputy is facing the inmate and he proceeds to head butt the deputy, splitting her nose and making a mess of her face.
The "ninja" steps in and is going to teach the inmate a lesson and the inmate proceeds to two handed fist him in the neck and down the ninja goes. Out cold. David steps in and grabs the shackle chain and proceeds to elevate the inmates feet, at which time the back of the inmates head makes solid contact with the pavement. Lights out.
Later he just looked an ninja and said " I guess he didn't "ha" when you went "hey". The jail ain't no dojo....
7900
« on: September 09, 2016, 05:06:13 PM »
“It is dangerous to be right in matters on which the established authorities are wrong.” Voltaire
Pages: 1 ... 156 157 [158] 159 160 ... 224
|