0 Members and 1 Guest are viewing this topic.
Has that thing been sitting halfway outside the garage like that the whole time, or have you been rolling it in and out everyday?
So, Bobby...being the calculating trained warrior NCO that you are. Take the appropriate action, Execute!
your standard grunt level CQB is just putting rounds and rounds on scary stuff till it stops scaring you!
So... figure I would add some advice to the thread -- late as per usual...Why not pull the front cooling stacks to gain access to the water pump, fan, harmonic balancer, etc?
Well, yes and no Nate... He already moved the A/C compressor out of the way, so we know the lines are flexible in spots, so the condenser should be able to be moved a bit too to aid in working room. The condenser is considerably smaller than the radiator and intercooler, and is the front-most item in the stack, so that would gain him 4-5" fore/aft of working room for wiggling the pump in and give him some line of sight on the sides.Here's a pic of the front end of mine torn apart 2 years ago. I was able to remove the core support without disconnecting any of the A/C lines, thats how much play it has.Caveat here -- mine is an '06, Don's is an '11, so I don't know what all has changed...
Looks good so far. So clean cept the extra copper spray all over.Question. Thinking of wrapping my up pipes, more for heat than anything else. Or do you guys think another barrier on the firewall is good?