This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Bigdave_185
Pages: 1 ... 37 38 [39] 40 41 ... 154
1901
« on: December 17, 2020, 05:38:38 PM »
I mean from the run off of the paint? Did it mess up the driveway?
Sent from my iPhone using Tapatalk
1902
« on: December 17, 2020, 04:52:10 PM »
Oh my. What does the driveway look like?
Sent from my iPhone using Tapatalk
1903
« on: December 16, 2020, 11:37:32 AM »
Yep. Trader her off.
Sent from my LM-Q730 using Tapatalk
After I demoed that fifthwheel I have here for the bed, the construction methods are subpar. They aren’t designed to be reworked. I wouldn’t wash my time. Buy a newer rig, new Gen, new fridge, new parts. I agree offload that to someone else Sent from my iPhone using Tapatalk
1904
« on: December 16, 2020, 09:09:16 AM »
I’d b looking for a new trailer before I tore into the framing of those.
Sent from my iPhone using Tapatalk
1905
« on: December 14, 2020, 09:30:44 PM »
They botched combo tig and mig set from HF
Traverse has 190k miles 2010. It’s rough for sure
Sent from my iPhone using Tapatalk
1906
« on: December 14, 2020, 09:12:34 PM »
Sales man come over today Meguirs sales rep. 3000 grit on the hood Meguirs compound wax Meguires ultra finish 2 times in a row What do you think   Sent from my iPhone using Tapatalk
1907
« on: December 14, 2020, 02:43:14 PM »
Sorry the vents I had viewed are for vans and trailers
Can you do just a regular turtle back vents?
Sent from my iPhone using Tapatalk
1908
« on: December 14, 2020, 12:52:17 PM »
The cabinet shop purchased one of those,
Sent from my iPhone using Tapatalk
1909
« on: December 14, 2020, 12:51:55 PM »
It’s not to expensive, here two inches of spray foam isn’t to bad
Sent from my iPhone using Tapatalk
1910
« on: December 14, 2020, 02:12:07 AM »
My kids will leave the bread tie off the bread bag for ya if you want Me to send one your way
Sent from my iPhone using Tapatalk
1911
« on: December 13, 2020, 11:31:40 PM »
Spray foam
Sent from my iPhone using Tapatalk
1913
« on: December 13, 2020, 02:11:46 PM »
Same, I see them all now.
Glitch in the Nexus I guess
Sent from my iPhone using Tapatalk
1914
« on: December 13, 2020, 01:07:53 AM »
Anyone else having issues with photos not being viewable ?
Sent from my iPhone using Tapatalk
1915
« on: December 12, 2020, 03:31:45 PM »
Those would be killer bright under mommas mez
Sent from my iPhone using Tapatalk
1916
« on: December 12, 2020, 01:21:18 PM »
HA!
Sent from my iPhone using Tapatalk
1917
« on: December 12, 2020, 11:08:31 AM »
Just gonna leave this here  Sent from my iPhone using Tapatalk
1918
« on: December 11, 2020, 10:29:43 PM »
Took grandpas old bluepoint bench grinder today and replaced the power cord It used to shock you if you touched the body while it was plugged in  Now she is ready for use until the internals give out  Does anyone have a clue on how to order or decide what grinder wheels are measured by? Never replaced these. I have a wire wheel, in good shape. I have a buffer wheel, needs replaced I have a grinder wheel, I’d say finer finish. It’s not very porous. It needs replaced. Not sure what I am ordering or looking for? Wheel overall size? ID of wheel? How do they measure the Grit/ coarseness ? Sent from my iPhone using Tapatalk
1919
« on: December 11, 2020, 05:19:35 PM »
I imagine it’s been a year or better since I ventured to the local Mall, man oh man has everything closed up. It’s sad to see out once glowing economy
Simply turned off for some half cocked virus that has zero affect of anyone
Sent from my iPhone using Tapatalk
1920
« on: December 10, 2020, 12:39:40 AM »
A Fox? Pigeon?
Sent from my iPhone using Tapatalk
1921
« on: December 09, 2020, 10:55:12 PM »
Set a picket under that hose and drink a whiskey while it runs lol every time
Sent from my iPhone using Tapatalk
1922
« on: December 09, 2020, 10:23:04 PM »
Curious why you pulled the drain valve. Iv liked mine
Sent from my iPhone using Tapatalk
1923
« on: December 09, 2020, 09:16:26 AM »
NAU? Cool. Beautiful town, albeit skyhigh property prices do to wealthy libs buying up the forest.
I will second this. Even when it’s blizzarding :)
Congrats to her getting accepted, and for raising superb daughters.
And I second the congratulations on successfully raising good kids Sent from my iPhone using Tapatalk
1924
« on: December 08, 2020, 10:56:38 AM »
Excuse me. Who’s house?
Sent from my iPhone using Tapatalk
If you’re talking about my post I have no clue and by nothing valuable I meant no people. We’d already been through it once to search though.
Sent from my iPhone using Tapatalk
Sorry I was first thinking it was your home and became concerned. We have had one fire already in the group. No desire for a second home to go up Sent from my iPhone using Tapatalk
1925
« on: December 08, 2020, 12:46:22 AM »
Excuse me. Who’s house?
Sent from my iPhone using Tapatalk
1926
« on: December 07, 2020, 08:08:57 PM »
Shawn I might be wrong but I don’t think you run standard Romex in metal studs. Doesn’t that mean metal boxes also?
Sent from my iPhone using Tapatalk
1927
« on: December 07, 2020, 10:46:11 AM »
Sorry David, Although we all surely agree, I'm not lettin' profanity in too great a quantity in these parts.
1928
« on: December 07, 2020, 09:36:27 AM »
Can you even call that a football field? Holly smokes that’s a lot of mud
Sent from my iPhone using Tapatalk
1929
« on: December 06, 2020, 11:15:36 PM »
Deleted, gave the stuff to Sam. Didn’t need to drama it was causing
1930
« on: December 06, 2020, 10:41:01 PM »
Be careful of epoxy as they will work well but make that driveway really slick. The guys who helped with your pool might have a option or two also
Sent from my iPhone using Tapatalk
1931
« on: December 06, 2020, 10:40:21 PM »
The sealers I have used never last to long. Let me get a picture of what I used  It’s held up ok. But time will tell Sent from my iPhone using Tapatalk
1932
« on: December 06, 2020, 10:36:43 PM »
Deleted
1933
« on: December 06, 2020, 06:49:45 PM »
The concrete is already dirty
Sent from my iPhone using Tapatalk
1934
« on: December 06, 2020, 06:48:58 PM »
You better polish it now!! Lol looks good Ken
Sent from my iPhone using Tapatalk
1935
« on: December 04, 2020, 12:11:48 PM »
Finished the stupid Jetta this AM  Sent from my iPhone using Tapatalk
1936
« on: December 04, 2020, 10:40:31 AM »
We always had cub moms.
Sent from my iPhone using Tapatalk
1937
« on: December 04, 2020, 10:40:06 AM »
I guess I’d like to know the pros and cons. I’d first think the rear would handle weight driving but then I think the whole truck might be smaller. The front loaders are dual engines. Usually six drive axles, and the floater
Just sure neat trucks either way they shoot mud
Sent from my iPhone using Tapatalk
1938
« on: December 03, 2020, 06:44:03 PM »
I hope you plan on posting a full side of vehicle photo
Sent from my iPhone using Tapatalk
^^^ That's a pic of my Suburban, but essentially the same tire is going on the truck
Oops I forgot to read the heading, thought this was the burb page Sent from my iPhone using Tapatalk
1939
« on: December 03, 2020, 04:49:06 PM »
I hope you plan on posting a full side of vehicle photo
Sent from my iPhone using Tapatalk
1940
« on: December 03, 2020, 03:55:19 PM »
Trying out Adams polish single step with their microfiber pad. It does a resent quick job. Good results considering I’m used to three stepping and then hand polish after The Dewalt orbital has a decent configuration, I wish the high Rpm (5000) was actually what is says it is. I can’t tell or hear any speed difference from 4000-5500 rpm on the dial But it has an much less vibration compared To other units I have used in that price range, The Rupes is smooth as glass but $400 ish  Mirror  And some trim 
1941
« on: December 03, 2020, 03:52:03 PM »
  Sent from my iPhone using Tapatalk
1942
« on: December 03, 2020, 03:34:26 PM »
Well I am doing some assuming for sure, but the tie downs holding it there led me to think they had a hinge of some type to drop down like a table.
I hadn’t thought of armor but if that’s the case I thing I would have it on the doors also?
Sent from my iPhone using Tapatalk
1943
« on: December 03, 2020, 12:41:56 PM »
I think that’s a great use of hood space. The table on the side needs to be made out of a longer lasting material but functional is functional Don
Sent from my iPhone using Tapatalk
1944
« on: December 02, 2020, 04:08:02 PM »
Well polished up the left side of the garage queen,  Rebuilt the carburetor and installed new jets, gaskets, hoses. On to the right side  Sent from my iPhone using Tapatalk
1945
« on: December 02, 2020, 01:26:14 PM »
Oh man! I was looking for a real account of bravery lol
Sent from my iPhone using Tapatalk
1946
« on: December 02, 2020, 12:56:59 PM »
I actually think I’m due for a rebuild of mine or just replace It. One of these days lol
Shawn what’s this going on? The Fummins or something else
Sent from my iPhone using Tapatalk
1947
« on: December 02, 2020, 12:55:47 PM »
I’m in a few chapters. It’s so far good. Still on the fence I hate reading political agenda but so far he has stayed non biased even though I know his thoughts.
Sent from my iPhone using Tapatalk
1948
« on: December 02, 2020, 11:27:01 AM »
Just started the book Fortitude by Dan Crenshaw,
Anyone else pick this book up along the way?
Sent from my iPhone using Tapatalk
1949
« on: December 02, 2020, 09:21:28 AM »
Same website I found, With parts for that piston. Cryin shame they didn’t make that rubber gasket removable. Go from 125 to 10 real fast lol
I’m still debating. Today I see if I can get the drain valve off and see what falls out of that tank
Sent from my iPhone using Tapatalk
1950
« on: December 01, 2020, 11:08:59 PM »
He’s talking about all the dumb bells he had dropped off this weekend, I assume in his garage
I don’t envy that task either
Sent from my iPhone using Tapatalk
Pages: 1 ... 37 38 [39] 40 41 ... 154
|
Show Posts
