Funny you purchased those, we just chopped up 48” 20’ pipe and covered em in mud on a jobsite because no one would let us return em lol


Sent from my iPhone using Tapatalk

Quote from: Dustoff35 on April 13, 2023, 05:50:43 AM

When my family and I go west for summer vacations, we always bring a lot of gear. Mountain bikes, kayaks, paddle boards, backpacks, tents and as much food as we can haul. Now that we had a 3500 with substantial payload capability, we could safely load up the truck as well as the toy hauler. In the past, due to payload limitations, the toy hauler would be packed full and the truck bed would be almost empty so as to not exceed payload capacity. So often you will see a 1/2 ton or 3/4 ton truck with a full bed, cab loaded with pax and a trailer with 800-1000lbs of tongue weight. Many pickup owners are unaware of payload capacity and exceed it, placing their family and others at risk.

And the more you load in the rear area of the toy hauler, the less tongue weight you have to worry about. That is the only problem most have with a toy hauler, lots of tongue weight because they don’t have any toys back there.

Iv found this to be false in my case, the amount of tongue weight in mine, empty or loaded is not even in the 100’s of pounds different. Granted I have a three axle not two.

Shawn. What do you mean 3/4 ton, ford and dodge independent rears?


Sent from my iPhone using Tapatalk

Well hey there guys!


Sent from my iPhone using Tapatalk

On the inter webs someone spoke the 24 DRW trucks come with the felt inner fender liners on the rear, sure enough they do and you can order them direct from GM.  They fit into factory holes of the 20+ but there is some holes left in filled.  I chose to pop a few 5/16 holes and use some of the plastic clips gm is so found of using.

Here is finished product after I coated the underside with amsoils under body protection stuff.







Complete as Gm should have shipped it


Sent from my iPhone using Tapatalk

Iv also got to see in my bosses new barn/shop at his place. He did 6” tongue and groove with a white wash over the whole interior. Man does it look awesome


Sent from my iPhone using Tapatalk

The mag base for charging is slick for in and out grabbing your phone. I have one in the box for the second phone holder for the boss lady but I haven’t installed

You will like it. Well planned design. Ok customer service, Iv had better elsewhere.


Sent from my iPhone using Tapatalk

I like his style


Sent from my iPhone using Tapatalk

You’ll do wonderful in the interview.


Sent from my iPhone using Tapatalk

What’s the back wall material? 1/4” something?


Sent from my iPhone using Tapatalk

100%


Sent from my iPhone using Tapatalk

How are those work boots?


Sent from my iPhone using Tapatalk

Quote from: Bigdave_185 on March 08, 2023, 08:37:58 PM

To be fair it is a Mopar.  Lots of them guys can only read picture books anyway.  They are just playing to their user base. 

And you now have two lol


Sent from my iPhone using Tapatalk

Well, from what I can see so far, the thing is very well-built. And the interior puts the GM's I was looking at to shame.

now your tellin jokes!!

No one will buy a fiat was put together better then an gm or ford vehicle.


Sent from my iPhone using Tapatalk

To be fair it is a Mopar.  Lots of them guys can only read picture books anyway.  They are just playing to their user base. 

And you now have two lol


Sent from my iPhone using Tapatalk

OK, you're fixed...Now do you get notifications of a post on a thread you are following?

I can’t say I have ever had those turned on to verify that. 


Sent from my iPhone using Tapatalk

Did the Duramax sell?

And for sale sign goes in it when? 

Looks good better find some mall mulch beds to take some photos in.  Around here you could use a snow bank

We got about ten inches last night here on the Wasatch

I played in a blower all day on a private mt road

I had a neighbor who had a similar experience but with a cat,  owner said my cat will not be happy get a shot. Tried to Warn the vet. Vet didn’t take proper steps and got bit.  They had to keep the cat for two weeks for observation and then put it down

I have zero intention of telling the vet I got bit.  He is up to date on his shots and I have antibiotics I can take if need be. He left a deep hole but just one hole. He didn’t shake his head with my hand in his mouth.

Thank you guys.  I appreciate the support. 

Going to schedule a vet appointment for my mastiff tomorrow.

He attacked my bull dog tonight while he was sniffing a closed bag of dog food.
I whooped him into his kennel then he got ahold of my hand. I can’t have 145 lbs of uncontrollable dog in the home while I’m not here, especially not with the twins who like to be extra friendly as well. He can be so sweet and gentle but this is the third time he has tore into one of my other dogs.

I have a k9 puncture in the meet of my palm. He got a beating like Iv never gave before to him after I drug him out of his kennel.

Perfect sunset glow on the home!! Looks wonderful

What’s the definition of modification you are going off of? Window tint a mod?

I’ll give it another 2 week till something is ordered for it

I’ll suggest you add a mirror of some type to the sink corner. I find going to the store with clean hands and a grease smudge on my face a distraction to the poor autozone working, they can’t seem to spit out what model motor your vehicle has when I have grease on my face.  Mirror helps for cleanin up before you get into a pickup that’s brand new

Well I’m not sure I buy the no mod thing in your future, but we will play along

Good lookin color!

This function from tapatalk to the online sucks just sayin!! How flippin cumbersome to use.!

Here are the photos that didn’t load while up in ID

Some CB radio antennas my buddy Chris helped me run.  Talked to a guy from Missouri on the way home to Utah on it.   

Finished the black on the grill also.

Home and drippin in the what was a clean floor in the garage

I’ll post a few more photos when I get home and in my garage but I’m here to tell ya. The CB radio tuning stuff can be as basic or simple for some plug n play junk but in [USER=643346]@flyinhawaiian968[/USER] style he doesn’t do it that way at all!!

Each part for the RF was cleaned and inspected, then each part was added and tuned for maximum function via the brass screw at the top of antenna.
We started by tuning each antenna

[ATTACH=full]1112771[/ATTACH]
Had to drill the mount holes a little larger, then a ground screw hole as well.

Pulled each RF cable through the firewall using GM’s designed grommets, attached to the antenna and chased around in the cab. Chris made short work of all things. After a test drive Down the road we were able to talk to each other via the shop radio. Both of us seemed pleased with the results.

Then chris wouldn’t let me leave before he did at least one of the grill bars in a good n clean non wrinkle


That completes the grill now!

Then turned direction to hard wiring the USB plugs, driving cameras, and constant power to the CB radio.

The antennas have a bit of forward cant but I’m very happy with the function and the look. Using the antenna Quick connects I can pop them off real fast.

Time for bed, then head home tomorrow before it starts raining here. Can’t be havin dirty trucks!